Troy-Bilt Edger Parts

Fuel Tank Assembly W/Fuel Lines Incl. 29 – Part Number: 753-06797

Your Price

$26.83

Troy-Bilt Edger Fuel Tank Assembly W/fuel Lines Incl. 29

★★★★★

1 Review

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Robert from ORANGE, CA

One of the two fuel lines cracked and leaking

Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover Read more...

Edger Blade – Part Number: 781-0080-0637

Your Price

$9.16

Troy-Bilt Edger Blade

PartSelect Number PS9129938

Manufacturer Part Number 781-0080-0637

This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which may happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.

Lawn Mower Drive Belt – Part Number: 954-04032B

Your Price

$26.85

Troy-Bilt Edger Lawn Mower Drive Belt

★★★★★

1 Review

PartSelect Number PS9172714

Manufacturer Part Number 954-04032B

This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measuring 3L x 35.80 inches, this belt is sold individually. A wrench may be needed for installation, depending on your equipment model.

Your Price

$25.45

Troy-Bilt Edger Bearing

PartSelect Number PS9167498

Manufacturer Part Number 941-0155

This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber. This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. You will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out. Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.

Tiller Jamlock Nut – Part Number: 712-0266A

Your Price

$5.95

Troy-Bilt Edger Tiller Jamlock Nut

PartSelect Number PS9299545

Manufacturer Part Number 712-0266A

The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replaced. This is an authentic part authorized by the manufacturer.

Snow Blower Star Knob – Part Number: 720-04072A

Your Price

$7.71

Troy-Bilt Edger Snow Blower Star Knob

PartSelect Number PS9109078

Manufacturer Part Number 720-04072A

This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually. This part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation. Customers rate this repair as Easy.

Edger Torsion Spring – Part Number: 732-0188A

Your Price

$13.55

Troy-Bilt Edger Torsion Spring

★★★★★

1 Review

PartSelect Number PS9301385

Manufacturer Part Number 732-0188A

A torsion spring is a grey, metal spring which comes individually sold. It provides tension on triggers and switches and has other applications depending on the equipment. If broken, there will be no tension and the part should be replaced. Installation is rated as Medium difficulty and requires a wrench and socket set.