Snapper Trimmer Hardware

Snapper Trimmer Lawn Mower Nut This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Snapper Trimmer Chainsaw Screw

Snapper Trimmer Bolt, Carriage 5/16-18

Snapper Trimmer Wrist Pin Retainer

Snapper Trimmer Lawn Mower Nut 1/4c Hex Flange Lock

Snapper Trimmer Lawn Mower Flat Washer This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits your model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

Snapper Trimmer Screw

Snapper Trimmer Screw, Self-tapping 5/16-18 X 5/8

Snapper Trimmer Nut - Carb. Screw

Snapper Trimmer Lawn Mower Push Retainer