Samsung Range Sensors

Videos!

Your Price

$41.83

Samsung Range Long Oven Sensor

★★★★★

38 Reviews

PartSelect Number PS1570174

Manufacturer Part Number 12001656

This long oven sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of your oven cavity. There is an adapter at one end, a probe at the other, and they are connected by an insulated wire. The probe is approximately 7 inches long. You can test the sensor with a multi-meter for functionality. You need to check the model-specific manual to determine what the proper resistance is for your specific appliance. This oven sensor comes with two wire harness adapters and a set of instructions.

Fixes these symptoms

Door won’t open after self cleaning cycle
Element will not heat
Little to no heat when baking
See more...

Installation Instructions

David from Westford, MA

Oven not holding 350 F, when cooling the coils did not reheat

Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy. Read more...

Videos!

Your Price

$125.60

Samsung Range Oven Temperature Sensor

★★★★★

6 Reviews

PartSelect Number PS4240743

Manufacturer Part Number DG32-00002B

This is a range temperature sensor, used to detect the interior temperature of your oven when it is baking or cooking. If you notice your oven is baking unevenly or at inconsistent temperatures, will not start or has too little or too much heat, it is likely that the temperature sensor is bad, or defective. This temperature sensor features a 3.9-inch-long probe, 3.2-inch-long wire harness, and 1.7-inch-wide support bracket. Replacing this sensor is fairly simple but will require a screwdriver, wrench and drill with the appropriate Philips-head bit. Disconnect your range from the wall outlet and pull it out from the wall. Removing your range door is not necessary, but will make removing the sensor that much easier. You will now locate your temperature sensor, which will likely be near the heating element at the top/bottom of the oven. Remove any securing screws holding the heating element and/or sensor in place. At the rear of the range, disconnect and remove the rear panel to gain access to the electronics of the range. Disengage the sensor and its locking tabs, and may also require you to disconnect the terminals for the heating element if your temperature sensor is fastened to it. Remove the sensor and heating element (if necessary). If the sensor is connected to the heating element, use a wrench to unfasten it. Now you install the new temperature sensor and reassemble your oven, ensuring that wire terminals are connected correctly.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

Steven from CHEYENNE, WY

Oven would not heat consistently

My barely 4 year old Samsung range/oven began not heating consistently. Even though it said 350, for example, we had to increase to 465 to get it to bake. Thought it was the temperature sensor. Ordered and installed new one easily. That didn't solve the problem. So, rather than throw more money at parts that may not have resolved the issue, I got a new Amana range. Samsung appliances go to my 'do not buy' list along with LG! Read more...

Your Price

$40.84

Samsung Range Oven Temperature Sensor

PartSelect Number PS16630998

Manufacturer Part Number DE81-07435A

Experience the perfect conjunction of quality and performance with the Samsung Svc-Temperature Sensor. This genuine part is designed with precision to offer the optimal function for your Samsung appliance. Renowned for its sturdy and durable construction, it provides a long-lasting solution for maintaining the ideal temperature setting. Install it with ease and benefit from its innovative design, dedicated to delivering reliable performance. Trust in a Samsung genuine part to facilitate efficient functioning of your appliance. With the Samsung Svc-Temperature Sensor, bring convenience and superior quality into your home or office.

Your Price

$137.56

Samsung Range Oven Temperature Sensor

★★★★★

1 Review

PartSelect Number PS4240744

Manufacturer Part Number DG32-00004C

The temperature sensor, also referred to as a thermostat, probe, or thermistor sensor, is responsible for measuring the temperature inside your oven. It is a platinum-resistance sensor with a resistance of 1000 ohms. If your oven is not heating evenly, not heating at all, or showing an error message, the sensor may be faulty. Typically located inside the oven, near the top, and attached to the rear wall, you can test the sensor with a multimeter. To do so, disconnect the power, remove the back panel, disconnect the wiring harness, and detach the sensor. Set the multimeter to ohms and touch the probes to the terminals. This test must be conducted at room temperature for accurate results. Refer to your user manual for guidance. If the test results show that the sensor is broken, you must replace it. This OEM replacement part is sold individually.