Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Black in color. No longer available in almond.
This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Replacing your Frigidaire Dishwasher Door Latch and Gasket
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Will Not Start | Door won’t close | Leaking
This part works with the following products:
Dishwasher.
Part# 5304442175 replaces these:
AP3774457, 1063307, 5304442175, 154211201, 154211202, 154211301, 154211303, 154293101, 154293102, 154293103, 154308101, 154308102, 154308103, 154316201, 154316301, 154316303, 154361201, 154361202, 154361203, 154434101
...
Show more, 154434102, 154434103, 154434105, 5304442173 Show less
Customer Reviews
Average Rating:
★★★★★
★★★★★
45 Reviews
4.8
Filter By Rating:
5 Stars
38
4 Stars
6
3 Stars
0
2 Stars
1
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robin I - September 23, 2020
Verified Purchase
dishwasher latch replacement was a success
We received the part in excellent condition, and it took only 1/2 hour to install it. Thought it would be much more involved but it was a pretty simple task.
★★★★★
★★★★★
Richard A - April 10, 2024
Verified Purchase
Worked as expected
perfect
★★★★★
★★★★★
Beverly M G - April 13, 2024
Verified Purchase
works great
This part was just what we needed. It came fast and was easy to install. Our dishwasher works perfectly again! We saved a lot of money since we did not to buy a new one!
★★★★★
★★★★★
MO W - December 7, 2020
Verified Purchase
Fast and affordable
My part came very fast and my handyman had no issues installing it. The gasket wasn’t needed at this time. But the new latch works great.
★★★★★
★★★★★
Jimmy W - December 27, 2018
Verified Purchase
Easy installation. Fixed my issue.
The part was packaged perfectly, easily installed, and fixed my issue.
Thanks!
★★★★★
★★★★★
Dick M - December 8, 2018
Verified Purchase
as advertised
prompt and proper
★★★★★
★★★★★
Jeffrey R - August 20, 2018
Verified Purchase
The exact part
Perfect part and fit with easy install thanks Jeffrey at Jetter Jeff llc.
★★★★★
★★★★★
Ashley S - April 15, 2018
Verified Purchase
Quick and easy
Super easy to repair, the Gasket part was too long for my dishwasher but still figured it out!
★★★★★
★★★★★
Karen D - September 21, 2021
Verified Purchase
Just right
The part was just what I needed. The installation video was very helpful.
★★★★★
★★★★★
Jen M - August 27, 2018
Verified Purchase
Easiest Repair Ever!
I was this close to hiring someone to fix our dishwasher handle after it snapped off. But a neighbor told me if I ordered the part he could fix it for me really fast. Well, I figured that meant I could fix it myself! The video here was well produced and easy to follow. All I needed was the super special screwdriver for the interior screws and BOOM! Done in 15 minutes!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 142 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door latch was bad so the machine wouldn't start
Unscrewed the screws on the door, opened it. Swapped out the latch. Screwed the door back together - GOOD AS NEW!
John from New Caney, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch snapped off
Viewing the instruction video provided online made my repair process extremely easy. Only thing that held me up was finding a tool to help me remove the torque screws from the latch. Thank goodness for inheriting my grandfather's tools and eventually finding the right bit. The latch came with a new gasket but I recommend not replacing it
... Read more if it's not necessary. I did replace ours at first but it was too thick and caused our dishwasher to leak. So I placed our original gasket back after cleaning it up and it works just fine. This wife was able to complete this project with two kids under the age of 4 and a hyper border collie running around while the husband was at work.
Read less
Melissa from WAYNE, PA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle broke and would not latch
I followed the instructions in the video. It was really easy and took less than 15mins. Very happy with the part.
Cait from ARLINGTON, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle was cracked and missing half of it
First, I located the dishwasher switch in the circuit breaker and turned it off, so as to kill power to the dishwasher - DO NOT PROCEED WITHOUT DOING THIS FIRST. Unscrewed front panel by removing 6 screws on the inside of the door frame. Then pulled 2 white wires on left and 2 black wires on right off of bottom of latch. Then used hex
... Read morewrench to remove 2 hex screws holding handle and latch to frame. Then reassembled in reverse order as I disassembled. Note that there was a video on the site when I ordered the part, and it demonstrated all the steps; however, when I received the part and went back to the site to review the video again, it was gone. I'm glad I paid close attention the first time I watched it as it was extremely helpful and showed me exactly how to complete the installation.
Read less
Joe from BRANDON, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch broke on Dishwasher
Watched the video on repairing the latch and replacing the Gasket and it was very helpful. Repair was much easier than I thought it would be.
Dan from Delaware, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch was broken
Unscrewed the front. Took out 2 screws on the old latch and put in the new one. Fast and easy.
This repair turned out quite easy. I removed the 6 phillips head screws that held the door latch cover in place, dropped the cover and let it hang while I removed the latch assembly that was held in place by two torx head screws. I used needle nosed pliers to gently disconnect the wiring connectors from the old latch assembly one at the
... Read more time, then carefully attached the wire to corresponding lug on the new latch. Once all wiring was transferred, I installed the new latch using the two torx head screws, replaced the cover, and reinstalled the 6 phillips head screws to secure the cover. There was no need to replace the gasket, so I'm holding on to it for future use.
Read less
Tony from Troutman, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
latch broke and would not close properly to run the dishwsher
the latch and gasket came 2 days after I ordered the part. the repair was very simple and only required taking a few screws out, attach the four plugs and put back together, very simple and very pleased with how quickly the part arrived!
Lori from Breinigsville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken latch to open dishwasher
I unscrewed the front panel by using the screws at the top, inside of the dishwasher (I also unscrewed the screws at the bottom, inside, but that wasn't necessary). It took a little coaxing, but I gently pulled one wire at a time from the old unit and replaced that wire before going to the next. After all wires were attached, I screwed
... Read morethe new unit to the body. Really easy. I just was puzzled why I received instructions to replace the gasket and none for the dishwasher latch.
Read less
Roberta from Ashtabula, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch was broken
I took the door apart. Removed and installed the new latch. Reassembled the door. Test ran the washer.
Paul W from Lindenhurst, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Howard
September 27, 2017
I've replaced the latch switch twice on my Frigidaire dishwasher. Each time, i've changed the switch, it lasts approximately a year, then the machine won't start. The machine just stopped for a third time in two years. I find that if i hold the door, while closed (of course), the machine will run . If i take my hand away, the machine stops running. If i touch and hold door lightly, the machine continues to run. Take my hand away, machine stops. I watched an entire tv show while holding my hand against the door, and did a load of dishes. Please help. What is the solution???
For model number FDB658RAC1
Hi Howard,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the door latch again, but also the door strike, the detergent and rinse dispenser, the door spring, the spring linkage, the bottom door gasket and the tub gasket. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Hilda
September 13, 2021
The door closure latch broke. It’s black plastic, one small piece fell off, then the rest of it came off after taking out the 6 screws. What part # do I order and will I be able to install?
For model number FDB510LCB0
Hello Hilda, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS979852. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
February 1, 2019
Bought the latch (broken) and gasket kit. Instructions on the gasket say there is a front and back and they are marked, mine isn't marked and both sides look the same
For model number GLDB653JB1
Hi Paul, thank you for your question. We do have an installation video that may help you out with this installation. You can view that here: https://youtu.be/7xagBLkPBO8. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ted
August 10, 2017
I need the part on the dishwasher that activates the switch on the door. It has a grey plastic piece that fits in two holes on the piece that sticks out.
For model number GHDA986K03SS
Hi Ted,
Thank you for the question. The part you will need to replace that activates the door switch is the Door Latch.
Good luck with the repair!
The door latch kit. After taking out the door screws the top should just fold over as per your demonstration but it doesn't it appears to be stuck on the right hand side of the dishwasher. What do i need to do to get the top panel to fold over
Hello Bob, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Pat
October 7, 2019
I want to replace my dishwashers door handle. There are two part numbers for the door replacement hatch, what is the difference between the manufacturers part number 5304442173 and 5304442175. Both descriptions are for a dishwasher door latch kit. Which one should i order?
For model number MDR251RER0
Hi Pat, thank you for your question. Neither of those parts are the parts listed as correct for your model. I have linked the correct part down below. Good luck with your repair.
Was this helpful?
Thank you for voting!
Don
November 17, 2019
Will this seal fit my dishwasher? Also is there an adjustment to make, so the door will fit tighter to the body of the dishwasher? Thank you.
For model number Westinghouse Seville Dishwasher
Hi Don,
Thank you for your question. Before we can assist you further, we would need the model number from your dishwasher. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Dishwasher-Model-Number.aspx. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Ransford
February 2, 2020
My door latch is broken. Will this part replace it.
For model number FDB641RAB2
Hi Ransford,
Thank you for your question. Yes, this part is listed under your model number and it will replace the old latch on your dishwasher. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Eugene
September 8, 2022
Do you have the door latch.
For model number Fdb750rc50
Hello Eugene, thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is part number PS979850. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Was this helpful?
Thank you for voting!
George
February 21, 2018
Dishwasher was not turning on, checked door switch, removed front door panel, the two arms to close switch circuit were not engaging switch, added small pieces of plastic to arms, to push switch down, we have power to washer now. Thanks.
For model number GLDB653AB2
Hi George, Thank you for the question. For a more long term fix I suggest replacing the switch. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Dishwasher-Seals-and-Gaskets.htm"},{"position":3,"name":"5304442175","title":"5304442175","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
