Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If you notice that your washing machine will not drain, there is a good chance that you will have to replace the drain pump. The drain pump is located inside the washing machine, near the bottom. To access the drain pump for this repair, you will need to remove the front panel. Before you begin this repair, be sure that the power source is disconnected and the water source is shut off.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rose-Anna B - May 30, 2023
Verified Purchase
Right part, easy enough install
Part fully functional, install easy enough. Minor struggle with hose clamps. I'm just a DIY homeowner and between the part being correct and the videos, I was back in action in no time.
★★★★★
★★★★★
CARL E - February 14, 2018
Verified Purchase
Washing Machine Water Pump and Motor Replacement...
Removed and replaced this assembly and it worked like new without the grinding noise the old assembly exhibited. The fun part was the two water hose disconnects-reconnects during remove/replace procedure. That was the only real work involved. Still easier than the old conventional water pumps of earlier model GE Washing Machines with the spinning bib adapter alignments when clothes tub was too wobbly during machine operation. The machine design is the first of its kind I have ever seen. There are no gears in this washing machine, that surprised me. The motor is like a stepper with instant electronic inverter PC board signals powering it to do all the agitation (slow and fast)and during the draining of tub water, the gradual up to top speed spin proceeding both rinse and the finalizing of the wash job and shutoff.
★★★★★
★★★★★
Bob C - June 19, 2019
Verified Purchase
Quick Fix
Part I ordered was a perfect match of my original installation was no problem
★★★★★
★★★★★
Jerry C - February 26, 2018
Verified Purchase
Well made.
Ordered last Thursday, got it next early Tuesday, took 3 minutes to install. Works like a charm . Web always easy to order from.
★★★★★
★★★★★
RICH R - April 17, 2020
Verified Purchase
Brand new part and worked as expected!
The part was as advertised and was shipped fast. My washing machine is back to normal. Thank you PartSelect!!
★★★★★
★★★★★
Stephen P - February 28, 2018
Verified Purchase
Great Part
Loved it had bracket just had to bolt it on hook up hoses hook up wires easy works great
★★★★★
★★★★★
Paul S - March 15, 2018
Verified Purchase
Part arrived when expected and worked correctly.
I couldn't figure out what was wrong with old pump intermittent problem but new pump has worked correctly since installation.
★★★★★
★★★★★
Scott Y - May 25, 2018
Verified Purchase
GE washer pump
Exactly the same part. easy to use the website and find, order the part. Shipping was fast.
★★★★★
★★★★★
Daniel P - July 19, 2018
Verified Purchase
Simple repair, worked great
Easy repair after watching video on the site. Never repaired a washer before. Cheaper than having a tech come out and saved me the cost of a new appliance. Definitely recommend for any repairs. Had to deal with customer service due to a shipping issue and were extremely helpful to address problem quickly.
★★★★★
★★★★★
Bruce E - June 14, 2018
Verified Purchase
Perfect Fit
What great service. Quick shipment, great instruction video and ease of installation. Happy wife, happy life. Thanks PartSelect!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 83 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not drain / Agitator noisey
Disconnect electrical cord from outlet . Removed Front panel of cabinet , removed water from tub with my shop vac , disconnected hoses and electrical connections to pump , removed the two 3/8 bolts that secure pump to bottom of cabinet and removed the pump . Replacement of pump was exactly everything in reverse only hoses went on first. A
... Read moregitator only required a small tug which exposed the 7/16 bolt that secures the agitator coupling . A simple remove and replace operation paying attention to the ribs which align to the channels inside the agitator . A small push locks it into place . Finish with replacement of front panel of cabinet.
If you follow the video that part select provides you will be just fine.
Charles from SHIRLEY, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not draining out of the washing machine
The front panel has to be taken off to access the washing machine pump. To do this I used a putty knife I inserted the putty knife in the slot at the top of the front panel where it meets the top of the machine to release the clip that holds the panel in place. Once the panel is off the pump is mounted to the bottom of the machine with tw
... Read moreo screws. There are also two hoses attached to the pump that need to be taken off. Before you do this you have to get as much water out of the machine as you can to minimize the amount of water that will come out when you disconnect the hoses. My recommendation is to replace the spring type hose clamps the manufacturer uses with a screw type hose clamp. These are much easier to put back on once the hoses are in place. You are not fighting the spring clamp while trying to put the hose on in a confined space. Then put the front panel back on. This may take about a half hour if you do not have too much clean up because you didn’t get enough water out of the machine.
Read less
David from SAINT CLAIR, MI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was stalling in rinse cycle and not draining
Removed the front of the washer, screwdriver used. Disconnected the electrical wires from the pump. Removed the two bolts from the water pump bracket, socket wrench used. Disconnected the pump to exterior drain hose, plumbers wrench used to loosen tension clips. Drained all the water out of the washer tub, not easy not very neat. Dis
... Read moreconnected the washer tub to water pump drain hose. Removed debris that was in the hose. Then connect the hoses to the new pump, bolted the bracket back in place, put the front of the washer back on.
Read less
Stephen from RIDGE, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not drain
Watched the video, good video. But instead of taking the bolts out first, it's easier to remove bolts last, to give support to remove the hoses.
Terry O. from Pie Town, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wasn't being pumped out.
The pump would stick and not pump the water out from time to time. I have removed the pump before and cleaned it so to replace it wasn't much different for me. The instructions on the web site were pretty straight and easy to follow.
Richard from Ridgeland, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clothes were still Wet after Spin Cycle and I could smell something burning like Electrical type smell.
Unfortunately this did not solve my problem. After further inspection I still have the burning smell and the washer cuts off after it Agitates for a few seconds then in a minute or so it will Agitate a few more seconds and then cut off again. I also replaced the control panel still have the same problem. I would say it is the motor but th
... Read moree motor works fine in Spin Cycle. As for the Pump replacement it is very simple just follow the instruction Video on this site and 15 minutes later your new pump is installed. I will keep the pump since my new Washer uses the same part. P.S. The burning smell is not coming from the belt. It's almost like some kind of circuit protector is tripping and then a few minutes later it lets the washer start again.
Read less
Mark from Keithville, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing Machine Pump
The website was tremendous. Everything was right there, easy to understand. The 'repair' video was outstanding; made it sooooo much easier. Would use this site over and over again (but hope I don't have to use it that much! lol).
My wife calls me and says that the washer is not draining water so I was like "great"...here goes more money. After I tried draining, cleaning, checking for leaks, I looked up possible causes and came across the water pump. I have bought from parts select and I love this website so I jumped on here, found the causes, diagram, installatio
... Read moren videos, and cheap parts. Added to cart, paid, and was here in about two days. I disconnected the electricity, opened the front lid, took off the two hoses, unscrewed the pump, swapped in the new one and hooked it back up. The washer works like new, took me about 10 minutes. Thanks Partselect!!!!
Read less
Jesus from Casa Grande, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
35 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
September 19, 2017
Water drains as it tries to fill. Turn off the switch, the draining stops. Turn on the switch and the water drains as it tries to fill again.
For model number GLWP2000M0WW
Hi Dennis,
Thank you for the question. The first thing to check is your washing machine drain hose,it might be pushed too far into the stand pipe in the wall. There needs to be an air gap and if the drain hose is pushed too far in there is no air gap. This creates a vacuum or siphoning and the water is siphoned out of the tub as it fills with water. There needs to be a bend at the apex of the drain hose. It needs to be above the height of the wash tub.
Hope this helps!
24 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
October 1, 2017
When it comes to the spin cycle, the washer will not spin to help eliminate the excess water out of the clothes, it drains but will not go into the spin cycle.
For model number WJRR4170G1WW
Hello Michael, thank you for contacting us. You will want to test the door switch/latch as a faulty one can prevent the washer from spinning. Also it could be the drain pump and motor assembly. Good luck with the repair!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
September 21, 2017
Twice the washer wouldn't drain. I would come back later and try the drain cycle and it would drain. My wife thought she smelled something like it was burning. I heard it yesterday and when it came to the drain cycle it didn't sound right. Looked inside it was not draining. Took all the clothes out and tried multiple times to drain with no luck. Tried this morning and it drained but was slow on getting started. I'm thinking of replacing the pump.
For model number GTWN4000MWS
Hi Tom,
Thank you for your question. It does indeed sound like you would have to replace your drain pump and motor assembly. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Megan
October 7, 2017
Decided to wash a few pillows last night when my washer started making horrible sounds when i looked in i saw that one of the pillows had a tare and there was stuffing every where. I opened the washer up and i'm assuming the stuffing has gotten lodged into the motor because it is no longer moving now my washer will not drain or spin. My question is what other repercussions could this stuffing have what else could or probably has broken? Should i just but a new dryer or just buy the motor?
For model number WCSR2070TBWW
Hi Megan,
Thank you for your inquiry. It is possible that the stuffing has gotten into the pump and the hoses and you will need to check them. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Claudio
November 12, 2017
Hello, my washing machine is operational and nothing new has changed on how I do laundry (water temp., detergent, etc). The last couple loads the clothes smell bad, like stagnant water.The clothes drum is empty of water but I'm assuming some water is remaining in machine an thus the stagnant water smell ? Would a new pump take care of this ? Thank you for your time.
For model number WHDRR418E1WW
Hi Claudio, Thank you for the question. I would check to see if any small items (socks ect.) have got in between the basket and drum or under the agitator base.Also make sure the drain hose is not clogged.You can try to run your washing machine empty on the hot wash setting, with some baking soda and 2 cups of vinegar, to thoroughly flush out mildew and dirt residue between the basket and the tub. Again, running another quick rinse cycle afterwards, also at a high temperature will ensure no vinegar remains for your next load of laundry.If the smell stays I suggest replacing the pump. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
December 17, 2018
Our washer fails to drain even though the pump seems to be running. Could there be an obstruction or blockage? Where would i look for blockage?
For model number Model GTWN4250MIWS
Hi Bob,
Thank you for your question. If the washer is not draining, the majority of the time the issue is the drain pump. If it is clogged with debris, you will need to inspect it. There are some parts that you will need to check to see which ones are causing the issue. You will need to check the drain hose, the belt, the pump to cabinet drain hose, the lid switch and the pump to tub inlet drain hose. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Marc
July 11, 2019
Does part number wh23x10030(drain pump) fits on my model..if not would you give me the part number please..
For model number GJSR2080T2WW
Hello Marc, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8768445. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
August 13, 2019
Resubmitted with model number
Washer doesn't drain. door switch works. correct volts from wall to pump leads. 11 ohms on pump. impeller spins and clear. in take and outflow lines are clear. some burning smell. humming.
any idea, this being so electronic, where to read fault codes?
For model number WJSE4150B2WW
Hello Joe, thank you for writing. We have information for GE fault codes at the following link: https://www.partselect.com/JustForFun/GE-Appliance-Fault-Codes.aspx. When testing the Drain Pump with a multi meter, it should read at about 16 ohms, and 120 volts to be working correctly. You may have a faulty Drain Pump. This part number PS8768445 is the correct replacement for your model. I hope this helps and good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
October 18, 2017
Is this the correct pump for my appliance?
For model number WPSE4200A0WW
Hi Gary,
Thank you for your question. This is the correct part for your model information. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
November 21, 2017
What color goes on what side when putting on the pump. Plugging it back up? On the top of those plugs how are they arranged also they are both yellow?
For model number WBSR3140D5WW
Hi Lisa, Thank you for the question. I suggest watching the video on how to install this part,you should find it helpful. Good luck with the repair!
https://www.youtube.com/watch?v=L3V8a6NCxns
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8768445
Manufacturer Part Number: WH23X10030
