Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This dishwasher float switch kit includes all the essential components—switch, lever, seal, and standpipe—to help prevent water overflow during operation. Designed to monitor water levels inside the dishwasher, the float rises as water fills the tub and activates the switch, which then signals the water fill valve to shut off. This safety mechanism helps protect your appliance from overfilling and potential leaks. Ideal for replacing a faulty or worn-out float switch, this kit is compatible with a range of dishwasher models and installs easily with basic tools.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
BOB W - January 26, 2019
Verified Purchase
Works great, easy to install but i didn't need it.
I had a small leak and thought it was the gasket or possibly cracked plastic. I installed this kit and it works as intended. However my leak did not stop. Upon closer inspection the leak was originating from inside and small bubbles were flowing down the inside of the float switch tube out the bottom. I discovered this is due to using too much soap/detergent. I changed from using the little shrink wrapped cakes to old school pour out of the spout granular detergent and the leaks stopped. Consider this if you have a leak your trying to stop.
★★★★★
★★★★★
Floyd J - August 7, 2023
Verified Purchase
easy repair
The part was perfect and fit perfect.
★★★★★
★★★★★
Brian L H - March 21, 2019
Verified Purchase
Part perfect
Part is perfect. Just shipped a little slow.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
leaking water bottom rigth side
remover the nut inside of the dishwasher under the float took bottom plate off open the plastic housing installed new the new float switch plug in the wires snip in the new housing put the unit back in the hole put nut back on and put the bottom plate back on easy as pie
michael from WINCHESTER, MA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pan leaked at the float/switch penetration
1. do not order or buy anything before examining the tension nut and washer. 2. Unplug the unit. 3. Open the switch box before trying to remove the float. Two types; easiest is pin based and lifts out easily. If the float catches, it likely has a headed bottom and needs an assist to lift past the stop flanges. 3. Using a standard ohmmet
... Read moreer, check for continuity. If it checks no need to replace. 4. Check float and assembly for abnormalities; cracks, lime deposits, etc. 5. Now decide what needs replacing. Did all my work with relative ease without pulling out the appliance. A couple sequences may need realigned.
Replacing the float switch was fairly easy and straight forward. removed old using adjustable wrench and replaced.
Replacing the door links was not difficult except I needed to pull the dishwasher out and had to disconnect the water line. reconnecting the water line was the time consuming and frustrating part. Once that wa
... Read mores hooked up and tested, i pushed the dishwasher back in place and all is good again.
I turned off the power at the fusebox,then removed the front lower cover using a screwdriver. I then removed the complete assembly and reversed the procedure. Quite simple, and the info on Partselect saved me 85 bucks! I put Partselect in my "favorites" for future use.
Noisy rattle in dishwasher since new when it was filling
Remove and replace solinoid, remove and replace mico switch. These are the only two electrically controlled devieces controling water flow. Replacing switch without replacing housing takes a soft touch. A small screw driver helps. Electrical connections have a stay in place nipple. Plyers help get thoes off.
Parts deliv
... Read moreered as promised, correct fit. Phone contact available at order question.
Dishwasher leaked under right front corner. Discovered that overflow(float switch) was either sticking allowing fill to overflow or rubber gasket was deteriorated allowing water to leak through mounting hole.
Removed mushroom shaped float cover by simply pulling up. Cover simply slide down into switch which is mounted through the floor of the tub. Using an adjustable wrench loosened and removed plastic fastening nut allowing removal of switch assembly from below. Disconnected two wires from switch and attached replacement assembly, reinserted
... Read morein mounting hole, reattached nut from top, reinserted float cap and job done! The only tricky part is that the switch needs to be mounted inside assembly, wires connected and snapped shut before reinserting. Not difficult once you figure it out, Also need to make sure rubber washer is inserted on the overflow tube before reinstalling. Keep track as you remove and simply reverse the order. Tried to obtain part locally and was told it would be 6-10 days before delivery. Order from Part select arrived in 2 days.
Read less
Robert from Rochester, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
67 of 76 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
February 17, 2018
I cannot lift the float off of the overflow switch. Do I need to try harder?
For model number 66513963K014
Hello Gary,
Thanks for your question. You will need to remove the toe panel at the bottom to access the lock nut which is on the float stem, and then remove the nut. This should allow you to remove the float.
I hope this helps.
Dishwasher fills overnight without being turned on ?
For model number KUDS01ILBL0
Hello John, Thank you for the question. This could be an issue with the Water Inlet Valve,PartSelect Number PS11746141. The defective valve can become stuck open and allow water to flow through into the tub when it is not in use. Hope this helps, good luck with this repair!
Hi we have this KitchenAid dishwaser since nov. 2009. Lately, we found out on several occasions dishes was not clean at all but the liquid soap had dispensed to the bottom of the washer after the full cycle. We giggled the floater a few times and then it would work. But sometime it still has the same problem. The water will fill in the bottom of the washer but the washing cycle will not come on. Is this a floater problem or other issues?Please advise.
For model number kude70fvss2
Hello Frank and thanks for writing.
It sounds like a faulty filter PS11759673 and/or spinner PS972316 test and replace if needed. It is recommended to replace both parts at the same time. We hope this helps. Please contact us anytime.
Brand new control board was installed, was working fine. Now when turned on it fills and starts to wash but doesn't drain or go past wash cycle, just keeps washing. When I hit cancel the pump comes on and empties water. Could this be the float switch?
For model number KUD102CRBL1
Hello John, Thank you for the question. This could indicate the Turbidity Sensor is dirty or faulty. The Turbidity sensors measure the amount of light that is scattered by solids in water and will end the wash cycle once the water is clear. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Colleen
November 22, 2019
We.Think we've troubleshooter everything else, so I was wondering if a broken float would cause the dishwasher not to drain properly? When I push it, I don't hear a clicking noise. Thank you!
Hi Colleen, in general this is not a cause of your dishwasher failing to drain, please read our guide on your symptom here: https://www.partselect.com/Repair/Dishwasher/Not-Draining/ . Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Peter
August 15, 2023
Is this switch faulty?
For model number Whirlpool WPW10327249 (dishwasher)
Hello Peter, thank you for contacting us. According to our research, we are providing you with the instructions that will help you in testing the float switch. Take each probe and touch them to one switch terminal each. This should produce a reading of either zero or infinity. Continue to touch the probes to the terminals and press down on the switch's button. The reading should change to the opposite extreme. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
