Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Range Round Carborundum Oven Igniter Specifications
This round style gas oven igniter, or also known as a broil or bake igniter, has an amperage range between 2.5 and 3.0. It glows white hot to ignite the gas for the oven. The igniter does this by attracting electrical currents through the safety valve to open it. *Please note: this does not replace the flat style igniters. If your gas igniter does not start, glows but does not light, or produces little to no heat when baking, replacing this part could be the solution to your problem. Refer to the diagram provided by the manufacturer for further instructions and guidance.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tom C - December 21, 2018
Verified Purchase
Absolutely seamless, completely plug and play. Just as you advertised.
Oven works like a champ. Easy install and the part fit perfectly with no kludging necessary. Thanks a lot for another great assist.
★★★★★
★★★★★
Paul H - March 5, 2020
Verified Purchase
Easy to find on website. Picture was very helpful
Clear information on the part. The search system made it easy to find the correct part and to confirm that it was the correct part. It would be helpful to include information indicating that the igniter continues to glow anytime the gas oven burner is burning. I did not know it was to stay on after the burner was lit. I had to call and get clarification about this. It would be helpfu to put this information in the package with the part.
Thank you
★★★★★
★★★★★
Maureen T - January 11, 2023
Verified Purchase
Oven fixed quickly
The part arrived and my husband was able to replace the broken part. We were able to have an oven that worked for a holiday party.
★★★★★
★★★★★
Beverly H - April 10, 2021
Verified Purchase
Exact replacement
Works perfect Arrived early
★★★★★
★★★★★
Julie O - April 19, 2018
Verified Purchase
gas oven igniter
My husband was out of the country and the oven would not heat up. I checked the manual and the internet and found the problem. PartSelect was easy to determine the part that I needed and I received it in 2 days. I was able to fix the oven by myself with the help of PartSelect and youtube.
★★★★★
★★★★★
Thomas B - February 12, 2020
Verified Purchase
Easy repair
Fit perfectly
★★★★★
★★★★★
Kenneth K - October 15, 2021
Verified Purchase
correct part
correct part and worked fine...
★★★★★
★★★★★
Ciro L - June 12, 2020
Verified Purchase
Works great... easy job
The hardest part was reading the model/serial# off of the stove! Took a picture of the number then enlarged the photo! The job took less than 15 minutes and I was up and running! Thanks
★★★★★
★★★★★
Laurence K - February 16, 2018
Verified Purchase
Round carborundum bake igniter ps360921
part arrived on time, and was a perfect replacement , stove works like new.
★★★★★
★★★★★
Ray B - May 9, 2020
Verified Purchase
Easy fix.
Diagnosed that previous igniter wasn’t glowing. Ordered part. 5 minute repair to install new igniter.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 13 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gas oven would not heat - Replaced igniter
This model does not have a removable bottom drawer making access a bit of a challenge. 1. Remove power to the range. 2. Remove the oven door and the kick panel below. 3. Remove the floor of the oven. 4. Remove the burner shield. 5. Become a contortionist, then stick your head and torso in the gas oven. 6. Loo
... Read morek at the top in the back to see how the broiler igniter is mounted. Use this to select the proper size wrench. I suggest using little ignition wrenches. The oven igniter is mounted in the same manner. 7. Locate the oven igniter at the bottom, in the back, at the center. Remove the small screw taking care that you do NOT drop the wrench or the screw. This will be done by feel as the screw is only visible after you remove it. 8. Route the wire of the new igniter down, next to the old igniter wire. 9. Crawl under the oven (behind the kick panel you removed, and cut the wire. 11. While you are under there, strip the insulation back on the wires about 3/8 inch. Splice the new igniter wire to the oven using the new wire nut. Check that it is secure. 12. Back to the oven. If your back is still holding up, remove the old igniter. Install the new igniter and the old screw. Tighten securely, taking care to not strip the threads. 13. Remove all of your tools, your head, and your torso. 14. Plug the oven back in temporarily, turn the oven on and verify the igniter heats up. 15. Unplug the range again. 16. Reinstall the burner shield, the oven bottom, the door and the kick panel. 17. Make sure you have all of your tools, stand up, and since you are now a contortionist, pat yourself on the back!
Read less
M from MOORE, OK
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower oven Igniter wouldn't heat up and fire the propane.
Called repair man and described the problem. He said I could do it myself. PartSelect had the part and a previous description on the PartSelect site told me how to do the repair. It was easy. Be careful when removing the igniter nuts. I used a very small amount of sewing machine oil so as not to strip the threads. works great.
Michael from CHEWELAH, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not light
took 2 screws out of bottom plate in the oven and lifted it out. removed 2 screw on the flame deflector and took it out. Took 2 screws out of old ignitor and unplugged it. Installed new ignitor tested oven put it back together. took about 30 min. screw driver only
Bo from DENVER CITY, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced oven igniter
this was so simple.. attach with 2 screws and plug in and done.. less than a minute.. to be honest it took me longer to put the oven back together than installing the new part. lol
Lynn from LEWISTON, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat.
Oven is gas. Burners on top OK, broiler in oven OK. Removed oven bottom plate and heat deflector. Carborundum igniter would not glow. Ordered new igniter from Partselect.com. With new igniter in hand I unplugged the oven from house power, removed the bottom drawer for access to the igniter connector, and disconnected it. Removed the bad i
... Read moregniter and replaced with new igniter...easy! Plugged in oven to house power and tested new igniter by turning on oven. GOOD!! Reassemmbled oven interior. Wife again happy.
Read less
Clinton from Marion, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't light (gas)
Removed racks and floor in oven, exposing ignitor assembly. Disconnected 2 wires at electrical connector plug. Removed 2 screws holding ignitor in place, removed bad ignitor, installed new ignitor in reverse order. Tested for ignition, all worked fine.
David from El Paso, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
12 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ignitor, for the baking unit, went out on my oven
Had to remove the bottom oven shelf and the broiler drawer. Disconnected the wiring pigtail theought the broiler opening and pulled the gas pipe from the baking oven. Reomved the two screws connecting the ignitor from the pipe. Connected the new ignitor and threaded the wiring pigtail back down the the opening in the baking oven. Connecte
... Read mored the wiring harness up inside the broiler and put the drawer back in. Re-installed the bottom shelf in the baking oven and tested. Worked perfectly. Back to cooking. :-)
Read less
Joey from Lowndesboro, AL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not ignite
removed broiler pan removed oven bottom plate removed burner cover unplug and remove igniter reinstall igniter clean and reassemble
Gary from Caldwell, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat
I read some of question & answer to the problem I was having with the oven. When I saw do-it-yourself that all I need to know. Repair man quote me for 100.00 dollar he will do it plus part. So I save 100.00 dollar and done it myself. Thank to partselect for fast and quick delivery service. It was only 2 screws holding the element and th
... Read moree connector was a just plug it into the other plug very easy to do. I will always come back partselect for answer and help and buy the part from them. YOU ROCK PARTSELECT
Read less
Charles from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Oven igniter was burned out and needed to be replaced
First I Pulled the oven away from the wall and turned off the gas and unplugged the oven. I then removed the bottom drawer and the oven door to get easy access to the ignitor location. I then removed the oven racks and the 2 shields which cover the ignitor with a screw driver. I then removed & unplugged the ignitor and 2 screws holding
... Read more the ignitor in place. This all took about 15 minutes. I then reversed the process and installed and assembled the oven. It only took about 25 min in total time and low and behold the oven worked again. Amazing the technology stuff. My wife things I am a genius...again. Not!!!
Read less
michael from Litchfield, NH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Galen
January 11, 2018
To light the oven, i push bake, then i push start. It takes too many seconds for it to light. It is not a smooth, quiet ignition like it was when it was new (1996 model). It is a delayed ignition, like it is going to blow up. It scares me every time i light the oven. I know it's going to take a qualified repairman - i think. Is it going to cost too much to get a 20 year old stove repaired, or should i just bite the bullet and purchase a new stove. I am a handyman (farmer). Maybe i can replace the necessary parts.
For model number SF387LEGN
Hi Galen,
Thank you for your question. If the igniter is taking too long to ignite, then you will need to replace the igniter. The part number for the igniter is PS11740875. There is a video on our website that you can reference on how to install the igniter. The stove may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS1573892. If you are not comfortable changing the igniter yourself, you will need to get a repairman to replace it. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
July 26, 2019
I’ve troubleshot the oven and believe this is the part that needs to be replaced. Question, my old part was connected using wirenuts and none of the wires have markings. Are there positive/negative wires on this new part? Does the polarity matter for this particular part when connecting to the wires to the control unit?
For model number F8858XO
Hello Paul, thank you for your question. The polarity doesn't matter. When connecting the wires it doesn't matter which wire attaches where. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cece
February 5, 2023
Oven heats but does not cook the food thoroughly -temperature fluctuates. Oven is older model. All 4 top burners work great.
what part would best fixed the problem?
Model no SF310BEGW thank you
For model number SF310BEGW
Hello Cece, thank you for contacting us. We would suggest checking the oven igniter, part number PS11740875, with a multimeter for continuity to pinpoint the fault. If the oven igniter is faulty, it may not produce enough heat to ignite the gas, or it may ignite the gas sporadically, leading to fluctuations in the oven temperature. Good luck with this repair.
