Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to light the oven burner. If you notice that your oven will not heat up properly, the igniter kit may need to be replaced. This flat style gas oven igniter has a body length of 3-3/4 inches. When completing this repair, the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. Before you begin this repair, be sure to disconnect the power source from the oven, and shut off the gas supply.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Hashim A - March 10, 2018
Verified Purchase
Easy to Install
Fast shipment great Price .
★★★★★
★★★★★
James M - March 9, 2018
Verified Purchase
Easy job, worked great
Part was fine, video available. No problem, cooking again.
★★★★★
★★★★★
Cynthia K - March 12, 2018
Verified Purchase
Easy repair, the video made it very easy.
The part worked perfectly and install was easy and quick with help of the video. I also appreciated how quickly the part came! Thank you ! I will highly recommend your company.
★★★★★
★★★★★
Eileen P - February 8, 2025
Verified Purchase
Repair part
The part was just what we needed.installion was easy. Our only problem was a long wait as the part got bogged down in shipping . Unsure why.
It was 8 days shipping from TX.
★★★★★
★★★★★
Mitchell D - June 8, 2021
Verified Purchase
No issues
Part worked on first attempt, also video attached to email was very useful
★★★★★
★★★★★
Sandra F - February 23, 2018
Verified Purchase
Just what I needed
Very easy to install. Movie was very helpful. Works just fine.
★★★★★
★★★★★
David B - June 2, 2023
Verified Purchase
Easy Fix
The part arrived early, and I installed it in a few minutes. Works great...no complaints.
★★★★★
★★★★★
ERIK I - February 14, 2018
Verified Purchase
my oven repair was a sucess!thanks Parts select,they oven igniter kit fit like a glove. the video s were helpful also.
The part was just like the factory part,easy plug and play
★★★★★
★★★★★
Eric W - February 14, 2018
Verified Purchase
Easy repair
This was one of the easier repairs ever. Videos made the entire process crystal clear. Afterwards, we adjusted the knob for the oven thermostat to bring the oven to the correct operating temperature. The oven works great.
★★★★★
★★★★★
Johnny J - February 14, 2018
Verified Purchase
Perfect
It was a perfect fit and my oven is operational
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 122 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven not holding "Set Temperature"
I followed the "Test Procedures" on your site { VOM to test the Temperature Sensor and observed the intensity of the Igniter } and found both items were not at specs. Although your video did not depict my model oven exactly, it showed me enough details on how to get to and change out the parts. IE: The connector plug for the Flat Style
... Read moreOven Igniter had to be accessed through the Warning Draw and not the Oven as shown in the video. A minor issue. I found your test and safety procedures, how to video's and ease of ordering the required parts fantastic. Most importantly the parts arrived in one day and a half. A very satisfying experience, Thank you
Shut off gas, bled excess and simply removed old defective parts and replaced with new exact replacement parts. Made final air adjustments after first checking for gas leaks. No problems at all. A good rainy day job!
Step 1 pull the broiler completely out of the bottom of the oven. Step 2 unplug the igniter Step 3 remove 3 small screws to pull the burner tube completely out of the oven. Step 4 replace the igniter and repeat steps to install burner tube back into the oven.
Gary from ROCKY POINT, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter went bad
1. Unplug from electrical outlet. 2. Turn off gas valve. 3. Remove oven door. 4. Remove bottom drawer. 5. Remove oven shelves. 6. Remove oven floor, take out the two screws at the rear. 7. Unplug the igniter from the wire harness, you can reach it from where you removed the drawer. 8. Remove the igniter, by unscrewing the two bolts using
... Read moreyour nut driver. 9. Replace with new igniter. 10. Put everything back together, starting with # 9 and work your way to #1.
With the model number I wnet on Parts select site and located the part through the problem finder selection,(GREATFEATURE!) (74% the problem is the Flat Style Oven Igniter) (watched the video on installation and compared my unit with the one in the video). The video explained installation completely and made it very simple. The only criti
... Read morec is that the oven door can be removed completely to make it easier to get in the the oven, opening part way and lifting up the oven door will come completely off. Also the broiler pan drawer can be taken completely out if you would need to get in this way for some reason. Final note: I called the local GE dealer Parts dept- they would have had to order the part anyway and it would have cost three times what Parts Select charged me.Save $$$ great! .
Read less
Harold from BUCKLEY, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas Broiler Igniter didn't work. Broiler would not come on
Pulled the gas stove out so that I could shut off the gas valve and unplug the power cord. Job was made easier by removing the oven door (which just slides out). I took the 2 screws out that held the old igniter in place. Went to the rear of the range where there was a small 3"X2" electrical cover for the igniter, and disconnected the
... Read more wire leads from the wiring harness. I then pulled the old igniter out through the oven front. Fed the new igniter wires through the back of the range and plugged the new igniter in. Reinstalled the electrical cover in the back of the range, attached the 2 -1/4" screws to reinstall the igniter inside the broiler. Put back the oven door. Turned the gas valve back on and sprayed on a soapy solution to check for gas leaks. Plugged the electrical cord back in. Pushed range back in place, Turned broiler on. Wait for a few seconds till the gas comes back thru the line. Works great Our stove was a GE Profile Gas Range. The part number for the igniter is WB13K21. We are very satisfied. Jim
Read less
James from Guilford, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas Range oven not heating/replaced new heating element
Oven would smell like natural gas odor , burner slow to come on
Replaced the flat style oven igniter. First, I watched the video on your web site, and used it as a reference to make the repair. I did remove the oven door tho, as it made it easier to complete the work, the video didn't show the door being removed. The video was very helpful.
Raymond from LAKEFIELD, MN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The igniter would glow but the gas would not come on.
I followed the video instructions on the site. I unplugged the power supply and turned off the gas supply. I then removed the plate out of the bottom of the oven to get to the igniter. Then I removed the screws and unplugged the igniter to remove the old part. I had to purchase two porcelain wire nuts because the new part connection di
... Read mored not match up with the old connection. The repairs were quite simple and I had my oven back and working in no time. I am glad I read the comments from others because I thought it was my gas control valve, but they were right it was my igniter. This saved me time and money.
Read less
Joyce from SALEM, WV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
49 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
December 13, 2017
If the oven is not coming on but broiler does is this the igniter? You can hear it trying to make contact!
For model number JGP75AEY1AA
Hi Joan, Thank you for your question. It sounds like it may just be your igniter that is the issue. You should be able to test that part with a multi meter to see if it is working correctly or not. It should read somewhere between 50 - 1100 ohms of resistance. Good luck with your repair.
26 people found this helpful.
Was this helpful?
Thank you for voting!
Travis Long
February 2, 2018
My oven won't turn on when i turn the oven nob, nothing.
For model number JGBS22BEA1AD
Hello Travis, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: flat style oven igniter kit, safety valve, burner tube, spark module, oven thermostat and pressure regulator. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
17 people found this helpful.
Was this helpful?
Thank you for voting!
George
December 3, 2018
When we light the oven it makes a loud boom.
For model number Jgbp36bej1bb
Hello George, thank you for your question. We would recommend replacing the igniter. Usually when this happens it means the igniter is taking too long to light. I hope this helps.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
November 18, 2017
My oven works fine but the broiler igniter will not glow. Does the broiler and oven have the same igniter? What part number would work for the broiler igniter?
For model number JGB281DER1BB
Hello Terry,
Thanks for your question. The flat style oven igniter is used for heating your oven, but there are two other igniters commonly associated with the broiling element. Thankfully, all of these can be tested relatively easily. If they glow for 90 seconds without generating heat, they are faulty and should be replaced.
I hope this helps.
Ordered and changed igniter wb13k21 as per recommended solution of low heat in oven still low heat,400 at 550,300 at 400.Cycles on and off but at a lower bake temp.Any recommendations would be appreciated. Thanks
For model number JGB605det2ww
Hi Hank, Thank you for the question. I recommend replacing the Temperature Sensor, PartSelect Number PS2374070.The sensor maintains the temperature inside the oven to the set degrees, when defective the oven might not obtain the correct temperature you set or will over heat. Hope this helps!
My oven lights all the time but we get a gas smell first. I had GE here on a service call, but it worked perfectly. Lit every time and no gas smell. He said it could be the igniter. What are the other possibilities
For model number pgb930set3ss
Hi Anthony, thank you for your question. The igniter might be the issue where it is not igniting right away and so you smell gas before it actually ignites. The only other part that I could think of being the issue might be the safety valve or regulator. I hope that helps. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
November 3, 2017
What should the omhs be reading for that part number
For model number Ps231270
Hi Scott,
Thank you for your question. This part should read anywhere between 0 and 1100 ohms of resistance. If the meter does not move then your igniter will have to be replaced. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
November 21, 2017
Old stove..wires go thru back of stove.. cannot find connection
For model number JGBS23GEV6WH
Hi Bruce,
Thank you for your question. Here is an installation video to help you with the installation: https://youtu.be/qTn1LxM5Rc4 . If the connection wires have fallen back into the stove, you will have to pull your appliance out, take off the back and push the wires back through the hole. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Reginald
January 15, 2018
Kenmore gas oven. The oven will come on but will not reach high temperatures. The ranges on top will all light up.
For model number 362.75498990
Hello Reginald, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: burner with igniter, pressure regulator, dual oven safety control valve, probe/sensor, and oven control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
El
January 16, 2018
The oven does not heat at all. There is no clicking sound.
For model number JGBS23WEL1WW
Hi El,
Thank you for your question. There could be a few parts that are causing that issue. I would suggest testing your igniter first. You could also test your temperature sensor as well. You can test both of those parts with a multi meter to make sure that they are working correctly. If both of those parts are fine you may want to also check your spark module. If that part is also working, it may be your control board that is the issue. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS231280
Manufacturer Part Number: WB13K21
