Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is a door latch kit, but you may also know it as a door catch kit. It is designed for your dryer. This part helps hold the door shut on your appliance. This dryer door latch kit comes in two pieces: a door latch, and a door strike or clip. Both parts are a beige white color and made entirely of plastic. Together they are 2 inches wide, 1 inch long, and about 1 inch high. To replace the door latch kit, you will need a pair of needle-nose pliers and a number 2 Phillips screwdriver.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Christine J - August 8, 2018
Verified Purchase
Easy Repair, Great price, fast shipping
Great price for the part I received. Easy to put in to the dryer. Fast shipping . super easy to order and utilize the website
★★★★★
★★★★★
John L - September 9, 2018
Verified Purchase
Easy repair and works great
The latch on our dryer broke after nearly 30 years of use. This was an easy replacement, and it shuts like it used to again.
★★★★★
★★★★★
Mary Ellen G - July 17, 2018
Verified Purchase
Mission accomplished
As soon as I received the door latch kit, I pried out the broken latch and popped in the new one. It was a perfect fit and works like new.
★★★★★
★★★★★
Armando Jesus G - May 18, 2018
Verified Purchase
Great Service on the part you sent me!!!
Your website is VERY user friendly- the youTube was most helpful and the install went without any trouble-THANK YOU!!!
★★★★★
★★★★★
Barbara A - May 1, 2018
Verified Purchase
Easy repair
First we watched the installation video, made the repair a breeze, part fits perfect, Thank you so much
★★★★★
★★★★★
JIMI I - April 6, 2018
Verified Purchase
ready repair
The part was perfect and installed easily. Fast delivery.
★★★★★
★★★★★
Jimmy F - April 17, 2018
Verified Purchase
Easy Repair
This was a quick and very simple fix. Thanks PartSelect, I will remember you in the future.
★★★★★
★★★★★
Michael T - April 22, 2018
Verified Purchase
Easy to remove and install
I purchased a simple dryer door latch for my 1983 Maytag dryer. The first part came and it was incomplete. When I contacted the company, they sent out a replacement at no cost to me and it came right away. Great customer service. They also supplied a video to a "sent product" email (for tracking). It showed me everything I needed to know about replacing the part. It was just a little thing, but the customer service was great! I highly recommend doing business with PartSelect.
★★★★★
★★★★★
Brandi G - November 24, 2021
Verified Purchase
Fast delivery.
The part was exactly what was needed and arrived faster than expected.
★★★★★
★★★★★
Terrence G - February 3, 2018
Verified Purchase
Perfect Replacement Part
The part received was an exact replacement. The repair was easy. My wife is happy. Thanks.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 35 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
no power, not turn on
I bought all the recommended parts for this trouble, but it turned out to be caused by burt wire on terminal block causing separation from block as all latches, motor, breakers, elements, switches and thermal sensors tested positive continuity, I finally decided to look in rear panel where incoming power meets terminus to motor, etc. and
... Read more wires were burnt at ends and post on block was separated from base. I got on phone immediately to customer service to order part shown on their very helpful schematic diagram seen on partselect website. The part was unfortunately discontinued but may be available from other sources. She explained how to search based on part # and the words " terminal block" which directed me to a supplier in MI. Repair completed once appropriate part was received. Thanks again for the direction given even though part was not purchased in the end. Will certainly return to partselect in the future if any issues come up in future. Very helpful site for the DIY'er!!
I took the two screws out of the end of the door and the door handle off. Then able to part the interior of the door enough to replace the latch. The video was really great.
Orson from Harrisburg, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch broken
one screwdriver, one new door latch, five minutes! Pried out the female part of the door latch, tapped in the new one and started the dryer. Never had an easier repair. Usually there is some hitch along the way you learn about the hard way, but not this time. TOO EASY!!
Maryanne from Bethesda, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Latch Broke
A simple repair. Just a screwdriver was needed (and of course the latch parts), Took all of 5 minutes
Perry from Hellertown, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Door would not stay Closed during operation.
Got on line and ordered a door striker and door latch. When my parts arrived, they also came with instructions. Turned out the metal clip on back of stiker had broken and would not help the plastic striker to close over the door latch. I only replaced the plastic striker and saved the door latch. Parts were around 16.00 dollars plus a lit
... Read moretle shipping cost, saved me a 45.00 service charge from a repairmen plus the cost of parts. So easy!!!!!
To remove and install the new parts, I followed the video instruction at whirlpool.com. Then removed the old knobs and put the new ones in. The new one created a rough contact and needed a little lithium grease to make a smooth insertion to prevent the friction from damaging the new part. It was an easy fix and took about ten minutes. Go
... Read moreod luck in your repairs!
Read less
Leiykun from Steelton, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Latch broken
unscrew the screws at bottom front of dryer, lift outward, upward, the bottom of the front of the dryer. As the dryer front tilts outward/upward from the bottom, the area where its hinged at the top of the front will disengage from the main frame of the dryer and the face of the front of the dryer comes off. remove the old door latch by
... Read more manipulating the plastic body of the latch (wiggle, twist pinch . . .) until, from the back, you can push the old latch forward through the front of the front of the dryer. At this point, you can put the new door latch back in from the front and push it in to place.
Read less
Thomas from Hatboro, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door latch broken door would not shut
I followed the video on the site which was really helpful.I took the door off without problem. I had to take the bottom panel off the front and unscrew screws on large front panel.Replacing the latch was a breeze. Just as shown on video. Be careful that dryer drum doesn't fall down off wheels. My did and had to push it back up.Replaced al
... Read morel panels and screws and it works great.
Read less
Fred from Delmont, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer door latch replacement
It was so easy to repair that my wife did it. She used a screw driver to pop out the old, worn plastic part that the door latch goes into and snapped in the new part and it was all done. So nice to be able to fix it yourself!
William from Maplewood, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
January 18, 2018
Will this latch fit this model Admiral
For model number AGD4675YQ1
Hello Jim, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11741434 for the catch and Part Number: PS11741661 for the strike. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Alicia
April 2, 2019
Will this work for my Maytag? The part on the door is metal not plastic.
For model number LDE8200ACW
Hello Alicia, Thank you for contacting us. I have researched the model you have provided and can confirm the PartSelect Number: PS2029855 is correct for your appliance. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
January 13, 2020
I need the door latch kit for this model. Can you help? The plastic prong broke off.
For model number LSE7804ADE
Hi Jeff. The correct kit is linked below. Thank you for your question and good luck with your repair!
Roaring sound at rear of drum in spin cycle. Maybe rear shaft bearing at high speed?
Hello Raymond, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
June 14, 2022
what door latch part will work for a Maytag model LDE712 series 02
For model number LDE712
Hello Gary, Thank you for your inquiry. We have researched the model number that you have provided and show the door latch kit as part# PS2029855. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Karen
January 18, 2020
The dryer will not start when I close the door it wants to do nothing please help me and do the knob that starts the dryer does it push in or how does it operate.
For model number DE409
Hello and thank you for writing.
It certainly sounds like it could be a faulty door latch PS1964648 and/or possibly a faulty drive motor PS3500893, you should check for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
For your convenience, we have attached the link to your service manual. We hope this helps. Good luck with your repair.
http://www.youserguide.com/wiki/Maytag_DE409
Usually, you pull out the button to start and push in to stop your dryer. We hope this helps. Good luck with your repair.
Does this kit work for Maytag ldg212 dryer? Thanks!!
For model number LDG212
Hello Kristine, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2029855. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
