EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Keep typing for more specific results...
Part Location Diagram of WD21X31909 GE CONFIGURED UI BOARD
See part 903 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

customerservice@partselect.com

CONFIGURED UI BOARD WD21X31909

 Fits your GDF530PSM2SS!

A Bit Difficult 

30 - 60 mins 

Rated by verified customers
$ Price Match Guarantee
$ 75.89
  In Stock
 Fits your GDF530PSM2SS!
PartSelect Number PS16762507
Manufacturer Part Number WD21X31909
Manufactured by GE for General Electric
Product Description

CONFIGURED UI BOARD Specifications

Introducing the Configured UI Board by GE, specifically designed for impeccable performance and lasting durability. This crucial component ensures seamless operations of your appliance by facilitating smooth user interface functions. Crafted with meticulous attention to quality, the GE Configured UI Board sustains optimal functionality while promising uncompromising reliability for your appliance. This component part ensures that your appliance runs efficiently and withstands the test of time. Invest in GE excellence and enhance your appliance's performance with this Configured UI Board. Exceptional performance and reliability are just a click away.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Why buy the real thing?

OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.

  • OEM from PartSelect
  • Genuine brand name
  • Guaranteed to fit
  • Superior quality and durability
  • 1 year warranty
  • Generic
  • Unknown manufacturer
  • No fit guarantee
  • Inconsistent quality and lifespan
  • Limited warranty and support
You May Also Need ?
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
Part# WD21X31909 replaces these:
WD21X24821, WD21X25729, WD21X26182, WD21X32001
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
UI Control panel would not light up and not work at all. Unplugging D/W failed to correct.
Unplug the dishwasher. Remove toe kick with 1/4 socket. Unplug, by pinching, door harness connector (White terminal connector) from PC board at bottom of dishwasher. Remove the door door using the Allen wrench, place it the hole on side of door hinge where pulley attaches. Unhook the pulley attachment at the door by using a vise grip to pull the plastic up and out. Don't break the plastic! Do the same for the other side. Remove Allen wrench. Pull door in and up at the same time. Take off 2 screws at bottom of door using 1/4 or 5/16 socket. Remove the vent cover (cap) using 2 flat head screwdrivers to loosen. Unscrew by hand. Slide toward the bottom, the inner door panel off from the outer door panel. You will see the door wire harness and some styrofoam insulation. Stand with outer door facing away from you. Remove UI by holding door handle, pressing it and pull the control head, up and away from you. It should come off from the top off the outer door panel. The UI will need to be removed from this housing. Unplug the UI harness connector. Remove 7 screw with a Phillips screwdriver or 1/4 socket. There are 2 clear plastic clips that need to be pressed in to release UI from the housing. Be careful, those clips are easy to snap. Place and snap new UI into the housing. Replace 7 screws. Reattach the connector pug to the new UI board. My personality was factory set. So, no jumper pins on my board. Snap the UI housing back onto the top of your door. Delicately, remove the styrofoam and unsnap the old harness to the soap and drying dispenser. Remove the rest of the old harness. Install the new door harness and use the plastic plugs on the harness to secure to the door. Install the styrofoam insulation. Attach the inner door panel to the outer door panel by sliding inner pan up toward the top. Replace the 2 screws at the bottom of the door. Attach vent cap by hand screwing it on. Position door at the dishwasher. Use Allen wrench or helper to hold at correct angle. Use a vise grip to grab the plastic pulley to attach it to the door hinge. Do the same on the other side. Plug in the harness connector to the PC board. Plug in the dishwasher and the UI should light up! Run a load and make sure no leaks are seen around the door. Replace toe kick.
Other Parts Used:
CONFIGURED UI BOARD DOOR HARNESS ASM UI
  • John from DANBURY, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Everett
June 10, 2024
Dishwasher is dead. No lights etc. Reset power, and Dishwasher works for about a day. Then goes dead again. reset power, and its good again. I'm assuming its the control board?
For model number GDF530PGM0WW
PartSelect logo
Hello Everett, thank you for reaching out. Yes, the issue is most probably because of the faulty user interface control board, part number PS16762507. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16762507
Manufacturer Part Number: WD21X31909
Brand
Model Number
Description
General Electric
GDF530PGM0BB
Dishwasher
General Electric
GDF530PGM0CC
Dishwasher
General Electric
GDF530PGM0WW
Dishwasher
General Electric
GDF530PGM3BB
Dishwasher - Dishwasher
General Electric
GDF530PMM0ES
Dishwasher
General Electric
GDF530PSM0SS
Dishwasher
General Electric
GDF530PSM2SS
Dishwasher - Dishwasher
General Electric
XDF400PGN0BB
Dishwasher
General Electric
XDF400PGN0WW
Dishwasher
General Electric
XDF400PSN2SS
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

Contact Customer Service