Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Floyd F - January 4, 2023
Verified Purchase
Part fit as expected
Part came in timely manner installed easily washer back in service
★★★★★
★★★★★
Ronald H - November 16, 2022
Verified Purchase
Correct part, decent price
The part arrived in a short time. Fit properly and priced competitively.
Hopefully won't have to, but will definately use PartSelect again.
★★★★★
★★★★★
William J - March 29, 2023
Verified Purchase
Worked perfect
Hard work perfect for my washing machine thank you so very much
★★★★★
★★★★★
Richard L - January 21, 2021
Verified Purchase
Replace pump in washing machine
Part came 1 day early. Took more time to drain the machine and move to a location i had room to work in, than it took to replace the part (<20 mins.).
★★★★★
★★★★★
Gale S - October 1, 2022
Verified Purchase
Easy repair
The part was a perfect match. Thanks for the great instructions!
★★★★★
★★★★★
Howard B - January 25, 2023
Verified Purchase
Pump replacement
Part arrived with no problems noted. Easy to change and we’re back in business.
★★★★★
★★★★★
Kurt J - December 29, 2020
Verified Purchase
Easy repair
Exact replacement part, arrived quickly and install was a breeze.
★★★★★
★★★★★
Joseph C - August 25, 2022
Verified Purchase
easy repair
The part came in fast and it was the right fit.
★★★★★
★★★★★
Nicole W - August 5, 2023
Verified Purchase
Perfect fit
Exact part we needed! Worked great!
★★★★★
★★★★★
Ray S - September 28, 2021
Verified Purchase
Replacement washer pump
Pump was exact as needed and came with additional instructions. Very happy. prompt delivery as well.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 15 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washing machine would not drain
I replaced the Pump Drain assembly. It was very easy. Removed 3 bolts and disconnected the electrical wire harness and put new one on. It works great.
Jim from MUKWONAGO, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was not draining (but was agitating), drain pump thought to be problem
You will need to shut off the water, unplug the washer, disconnect the water lines, disconnect and drain the drain line, tip the washer either at an angle or on its side, remove motor cover, disconnect drain pump electrical cable, remove drain pump, install new drain pump, reconnect drain pump electrical cable, reconnect drain line and wa
... Read moreter supplies, turn water back on and test the washer.
Note: I thought the drain pump was bad for 2 reasons. 1 was the washer had previously started to smell, indicating the washer might not be fully draining. 2 was that the washer would agitate (meaning motor seemed fine) but when it would normally start draining before spinning, the washer would do nothing (could hear a faint hum coming from the washer).
Read less
Karl from PITTSBURGH, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wouldn't drain
Took the belt cover and then replaced the pump. Did a dry run and everything was fine.
Richard from DANBURY, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn’t drain
Remove old pump install new one. Three bolts and an electrical connection
Ronald from Chickasha, OK
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not empty when it hot drain cycle
Once I determined it was the drain pump, (by taking off the drain hose and letting it empty by gravity, then running the spin cycle which worked ok) I ordered the part, got confirmation from PartSelect.com that it would fit my washer. I removed the old pump taking out the 6 screws needed to hold it and the cover in place and unplugged the
... Read more electric connector. I installed the new pump from PartSelect.com using the same cover and 6 screws and electric connector. I reconnected the drain hose and the washer has worked perfectly since then!
Read less
Elizabeth from Columbus, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wouldn't drain
Replaced water pump. Washer now works as new. Wife is now happy!
Kevin from ZOAR, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain after a load of wash
Being a woman I had to figure out tipping it in its front. I put it on a dollie and drop it down real easy. Removed all water lines after water was shut off. Removed bolts. Removed bolts on plate to the right to unplug old pump. Plugged in new one and replaced all bolts, hoses and tipped her back up. Works like a charm a
... Read morend I saved $408 by doing it myself!!!!!
Read less
Susan from Cypress, TX
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench (Adjustable)
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain
Unpluged the washer first got as much water out of the drum as possible the leaned the washer over forward and let it rest against something removed hose clamp from pump side and removed the drain hose from pump remove plastic cover and unplug pump push tab and pull remove bolts from pump remove pump install all components in reverse be
... Read moresure to replace pump to drum seal as well
Read less
James from Oxford, GA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Will not drain
The drain pump had three screws. Frist unplug the machine and turn the water off. And unplug the hose for the Hot and Clod Water. Make sure their no water in the tub. Unplug the pipe from the Tub. The unscrew the nut for the connector. Then unplug the connector and be careful not to damage plug for the connector. Press the plug connector
... Read morewith your finger or long nose pliers . Then just hook the new plumb and you all set.
Read less
Christopher from LYNN, MA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not pump water out.water filled and lid would lock, when put on drain and spin cycle, would just get a low humming sound.
Dipped water out as much as possible,tited washer at a 45 degree angle and propped it up. Took the 3 bolts out holding the pump assembly and the 3 bolts holding the belt guard.Unplug wire connecter,pull out assembly and than pull drain hose off of assembly. Reinstall the same as you take apart. Was a easy fix, and worked as it should.
john from EAST LIBERTY, OH
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger
January 13, 2022
MY WASHER WILL NOT SPIN OR DRAIN. THERE IS NO HUMMING NOISE BUT THE LID LOCK AND SPIN LIGHTS ARE ON. IT MAKES ONE CLICK AND THEN NOTHING WOULD THIS BE THE PUMP MOTOR OR IS THERE ANOTHER POSSIBLE CAUSE?
For model number GTW330ASK3WW
Hello Roger, Thank you for the question. We suggest checking the Mode Shifter. The Mode Shifter, controls the agitation program, and allows the washer to go through the fill, agitate, rinse and spin cycles. We hope this helps!
Does this come with seal? Water drains but doesn't spin clothes out good. Also leaking some in center of machine. Do I need this or just a new seal?
For model number GTW460ASJ0WW
Hello Barb, Thank you for the question. Yes, this Drain Pump Assembly will include the Drain Pump Seal, Part #: PS11763265. The New pump should fix the Leaking. We hope this helps!
How do you disconnect this washing machine for moving?
For model number GTW680BSJWS
Hello Nancy, thank you for writing. We have a video on taking apart the washer so it should have how to disconnect the washing machine. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Michelle
November 1, 2023
Sometimes the washer leaks all over the floor and then sometimes it will not drain and I believe it to be the pump motor but I wanted to be sure. But originally it was just dumping everything on the floor.
For model number Gtw460asj4ww
Hi Michelle, thank you for contacting us. Based on the description that you have provided, we would suggest checking the drain pump, part number PS12723115, as it is most likely faulty and may need to be replaced. Let us know if you have further questions!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
August 26, 2023
Dark clothes come out of the washer with white soap marks on some of the clothes. I run an extra rinse and most of the spots are removed. I checked the liquid detergent amount required and cleaned the washer (ran bulk with bleach and cleaned detergent tray). White spots persist. Soft water used. Any ideas?
For model number GTW720BSNOWS
Hi Tom, thank you for the question. Based on the description you have provided, we would recommend checking the drain pump, part number PS12723115, as it might be clogged and draining water out slowly resulting in lint, undissolved detergent, and soil redepositing on the clothes. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
April 29, 2024
Pump Drain Assembly WH23X28418
Does the drain pump assembly come with the drain seal or is that something that has to be ordered separately?
For model number GTW680BSJ5WS
Hello Ray, thank you for reaching out. Based on our research, the drain pump you mentioned comes with the drain seal. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
January 10, 2023
washer does not spin or drain and i have replaced a defective lid switch and pump motor spions freely when I took it off to check. Have fault codes 3-9-19-23-26-27-29-31. Same codes everytime I unplug machine to reset or clear the codes
For model number gtw335asn0ww
Hi Frank, thank you for reaching out. You need to check the main control board, part number PS16743401, and the drain pump, part number PS12723115, to fix the issue. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Our washer is leaking water and oil is this fixed by replacing
Pump drain assembly WH23X28418
For model number GTW460ASJ3WW
Hello Ron, thank you for your question. According to our research, you may need to check the drain pump seal, part number PS11763265. If this is not causing the issue, you may need to check the drain hose, part number PS8757195, and clean it if found clogged. If the issue persists, we recommend replacing the drain pump assembly, part number PS12723115. Good luck with your repair!
Is the recirculating pump included in the Pump drain assembly?
For model number GTW330ASK3WW
Hello Kayla, Thank you for your inquiry. We have researched the model number you have provided and do not show that it has a recirculating pump (as this seems to be only for top load models with a glass lid) and the drain pump only drains the water out. We hope this helps.
Was this helpful?
Thank you for voting!
Sharon
April 1, 2024
I have a GE 27in Spacemaker 3.8 cubic feet Top Loader Washer and a 5.9 cubic feet electric dryer stackable.
Every time I wash, the washer leaks a substantial amount of water during the rinse cycle.
Can fix this problem or should I buy a new machine?
Thank you in advance for your help
For model number GTUP270EM4WW
Hello Sharon, thank you for reaching out. According to our research, the issue is most probably with the tub seal, part number PS11726907. It creates a watertight seal between the tub and the inner spin basket. You may need to replace it to solve the problem. Glad to be of assistance!
