Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is a water inlet valve made for washing machines. This part is used to control the flow of water into the fill hose of the washing machine, to allow the washer to fill up with water. If your washing machine is not filling up with water properly, or if you are noticing leaks underneath your washing machine, the inlet valve has likely failed and you will likely need to replace it. This OEM inlet valve features two different inlets for hot and cold water but does not come with any other parts or accessories for installation. To replace this water inlet valve, you will need tools such as a screwdriver or wrench to gain access to it and remove it.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William J - May 7, 2019
Verified Purchase
Perfect Match
The part was exactly what I needed. Washer was repaired and working in 15 minutes.
★★★★★
★★★★★
James M - March 24, 2021
Verified Purchase
Perfect fix
This part arrived a little later than expected and I paid extra for quicker shipping. However, when we did get it the process of installing it was very easy. Washer is working perfectly!
★★★★★
★★★★★
Scott T - February 4, 2021
Verified Purchase
Easy Repair!!
Very happy with the service and quality of the part I ordered to fix my washing machine.
★★★★★
★★★★★
Terrence C - June 3, 2019
Verified Purchase
Just what I needed
It's funny that your example summed up my experience. There part was in excellent condition and worked wonderfully.
★★★★★
★★★★★
Gary R - December 23, 2022
Verified Purchase
Whirlpool Water inlet valve
Part arrived quickly and was exactly what I needed. Repair went smoothly. Washer back up and running normally.
Would definitely purchase parts from this supplier again if I need them!
★★★★★
★★★★★
SERGIO A - June 12, 2019
Verified Purchase
Thumbs waay up!
I pulled the old part out and replaced it with the new one, that simple. Works like a champ! Fast service and quality replacement parts, thumbs up!
★★★★★
★★★★★
Tom R - October 11, 2019
Verified Purchase
Repair went easy. Exact replacement.
The part arrived quick. Replacing was easy due to exact replacement part, was done in 30 minutes and was back washing clothes soon after. Thank you looking forward to working with you again . Sale personal was so helpful making sure part was right and what I needed before ordering. GREAT JOB !!!!!
★★★★★
★★★★★
Kay W - September 18, 2020
Verified Purchase
easy repair
the part came quickly and was installed easily. No more leak!!
★★★★★
★★★★★
Kurt M - August 10, 2024
Verified Purchase
Great part
This valve was an exact fit & arrived in a timely fashion
★★★★★
★★★★★
Malerie M - September 21, 2024
Verified Purchase
The part solved the problem
The washing machine wasn't getting enough water, very little. I went on Parts Select put in the problem and this part came up as the problem 95% of the times. Easy to replace once you figure it out. The Water Inlet Valve I took out had cracks.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cold water stopped working
Pried open the top of the machine. Used a putty knife. This was the hardest part of the job. Take your time. Took off upper plate of the back of machine, to free the value. Unplugged the power wires from the old valve and unscrewed it. Put in the new one and reversed processes. Easy peezy. Great deal on part. Saved hundreds of dollars doi
... Read moreng it myself
Read less
Martin from Jupiter, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer won't fill with water, Error Code LF showing on display panel.
Watched and followed You Tube Video . "Solved: The Fix for a Whirlpool Washing Machine that won't fill with water." The video is a little over 8 minutes long. At that start of the video he encourages you to watch all of the video for special instructions near the end of the video. You need to do that! I put 30-60 minutes, but actual
... Read moretime was 4 days as I had to order parts and wait for the parts to arrive.
Read less
Bill from CANADIAN, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no water to washer
a couple of issues to get valve out and off , 15 min. install and top back on!!!
Donald from LINN CREEK, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was dripping while the machine wasn’t running
Removed two screws that held the control panel from the back with a power drill. Pop the control panel loose with a screwdriver from the top of the machine with the quick disconnects. After turning both the hot and cold water off I remove the hoses with pliers removed two screws with the power drill that hold the water inlet valve in plac
... Read moree disconnected the wire harness plug And removed water inlet valve swap, the original harness to the new water inlet valve and follow the steps backwards to finish
Read less
Brian from VESTAL, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer not filling then timing out before load done
Turned off power and water. Removed hoses/Unplugged power. Removed screws to open and access control panel. Removed existing valve first by pinching off 6 wire connectors then screws securing valve to washer base. At this point, I replaced with new valve and reattached everything. I also added screen washers to both hoses as I suspect i
... Read moret was built up debris in original valve impeding water flow through valve that led to problem…
Read less
James from RICHMOND, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking at front left of washer especially after heavy loads
Disconnected water and unplugged. Took off top and control panel. Replaced water inlet valve with new one. Simple plug and play connections. It was easy to see the old valve was bad with rust and sediment collecting on hot side.
Kynrick from DENTON, TX
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leon
June 4, 2019
I have Whirlpool cabrio washer model number wtw7300dw1 cannot get water to come in can it's be the water inlet valve
For model number WTW7300DW1
Hi Leon, thank you for your question. Yes, you should take a look at your water inlet valve.The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
November 16, 2019
Washer seems to go through all the correct sequences until it try’s to fill with water. You can hear it trying to get water in but it’s very faint water running sound and it clicks randomly in the area of the water fill valve solenoids. Is the water fill solenoid my problem or is it the circuit board?
For model number 110.26132411
Hi Charles, the water inlet valve is the most likely fix. Thank you for your question and good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 12, 2019
I stripped the threads on the cold water inlet, would this replace that piece?
Hello Robert, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 13, 2019
I stripped the threads on the cold water inlet, will #14 in this diagram replace that? If not where can i find the part i need
For model number WTW7040DW1
Hello Robert, thank you for your question. Yes, the item # 14 valve PartSelect Number: PS12349461 is the correct replacement part for this unit. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
AJ
June 22, 2022
When the washer begins a normal cycle it sounds like there is water hammer. A plumber came and installed two pressure valves to reduce the noise but it still continues to make a banging noise. When the normal wash setting is on cold, the machine calls for Hot water and while holding the pipe i can feel it making a banging sound every few seconds. Would replacing the inlet valve solve the problem? Thank you!
For model number WTW7300DW1
Hello AJ, Thank you for your inquiry. If the washer is already set to be getting only between 30-55 PSI for water pressure (which is the usual cause of water hammer), we would recommend checking the water inlet valve, the water pressure hose and the control board as this controls the flow of water coming into the washer. Check the hose and test the water inlet valve with a multimeter, and if replacing the valve does not fix the issue, you may have a faulty control board. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
My inlet valve strainers are plugged with filter sand. Can I remove strainers and clean them. The strainers are not easily removed - at least in my case.
For model number WTW8127LC
Hello David, thank you for contacting us. Yes, you can remove these filters from the inlet valve using needle nose pliers and insert them again after cleaning them. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Russell
October 26, 2023
Does Water inlet valve-#W11220230 come with filters? I don't see them sold seperately.-Thank you
For model number 110.26132412
Hello Russell, thank you for contacting us. Yes, the water inlet valve you mentioned comes with the filters. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
April 2, 2022
i am trying to find a part number for inlet water valve assy W10758829 rubber seats( 3 ea ).on the bottom of module. been looking for quite a while. T hats the assy number
For model number whirlpool Cabrio washer water inlet module
Hi Richard,
Thank you for your question. Before we can provide you with information on the water inlet valve, we will need the model number from your washer. We have included a link from our website that you may use to find the model number on it. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!
hello,
A small amount of water is coming out while filling the washer, sometimes I get a faulty code F8E1 (no water detected), sometimes it works fine. Could it be the water valve?
Thank you
For model number wtw7120hw
Hello Mario, thank you for contacting us. If F8 E1 or LF appears in the display, it means the washer is taking too long to fill. It indicates that there is some problem with the water supply going to the washer. Please make sure both inlet hoses are properly connected and both hot and cold water supplies are turned on. If this does not help, the water inlet valve, part number PS12349461, is the most probable culprit. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Samantha
December 13, 2021
our hot water valve is stuck open on our whirlpool cabrio washer. Is this the correct part to repair this?
For model number wtw7000dw1
Hello Samantha, Thank you for your inquiry. We have researched your model and confirm that this is the correct water inlet valve for your model. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12349461
Manufacturer Part Number: W11220230
