Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is an inlet valve for various washing machines. Inlet valves are responsible for opening and closing as needed, to allow water to enter the washer during the washing cycle. This inlet valve features a hot and cold-water valve, as well as the necessary wire harness to easily plug it in. Since inlet valves are an electrically controlled solenoid valve, they can fail either due to electrical failure such a short, or after long, extended use. If your inlet valve fails, your washer will likely relay an error code, or it simply will not wash your clothes due to the lack of water, and the valves will need to be replaced. Replacing this valve will require a screwdriver and/or socket wrench, and some disassembly of your washer will be necessary. This inlet valve is an individually sold OEM part and does not come with any accessories or other parts.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Leaking | Water Filling Issues | No hot or cold water
This part works with the following products:
Washer.
Part# W11038689 replaces these:
AP6039690, W10776841, W10869800, W11024486
Customer Reviews
Average Rating:
★★★★★
★★★★★
21 Reviews
4.4
Filter By Rating:
5 Stars
15
4 Stars
4
3 Stars
0
2 Stars
0
1 Star
2
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James L - January 27, 2018
Verified Purchase
Great Part
The Part was in great Condition and arrived within 2 weeks
★★★★★
★★★★★
Stacy G - February 1, 2018
Verified Purchase
Great part poor service
The part was great. Worked perfect. But I paid extra for 2 day shipping and it took a week to get it.
★★★★★
★★★★★
John P - November 1, 2023
Verified Purchase
the perfect part
This was EXACTLY the part I needed to fix my washing machine. The cold water was not entering the machine and, the rinse cycle was not activating. Once I installed this part, everything works like new. Thanks
★★★★★
★★★★★
Donald C - January 27, 2023
Verified Purchase
Easy repair. The part works great.
Delivery was fast and the part was in perfect condition.
★★★★★
★★★★★
Jaclyn F - January 30, 2023
Verified Purchase
Easy Repair, Great Help
We had to replace this part after a cold snap caused some freezing and cracked the blue valve. The site made it so easy to identify which part needed through diagrams and then had an incredible how-to video on completing the repair. Turned a full washer replacement/application service repair into a maybe 1 hour fix that was easily done by myself and partner.
★★★★★
★★★★★
Robert C - September 11, 2022
Verified Purchase
Easy repair
Part work Ed great.
★★★★★
★★★★★
Pamela L - February 3, 2023
Verified Purchase
Easy repair
Came in few days was easy to install.
★★★★★
★★★★★
Ryan L - March 21, 2021
Verified Purchase
Very easy install
Part came quickly and in good condition!!
★★★★★
★★★★★
Jill B - July 1, 2020
Verified Purchase
Saved a service call and installed it myself!
Whole process fast and easy
★★★★★
★★★★★
Carol C - May 19, 2023
Verified Purchase
Perfect
Part was easy to exchange in the washer
Worked perfect first time
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The washer kept filling with water during the cycles
Unplug the washer. Turn of the water. Remove the hoses. using a 1/4 inch nut driver, remove the screws from the back panel. Remove the console by inserting a putty knife between the console and the top until you hear the click. Unplug the harness for the inlet valve. remove the two screws holding the inlet va
... Read morelve and then remove the inlet valve. Replace with new inlet valve and affix with the two screws. Plug in the electrical harness. Place Console back into position. Place back panel into position and tighten screws with nut driver. Put the hoses back on the inlets. turn the water back on. plug in the washer.
Read less
Latchmin from DORAL, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sensor was not changing it would go back to wash from rinse
Ordered the part for the 500 series Kenmore washer open the top switch the two parts out and reconnected the new part replace the covers they only thing is cold is hot and the hot is cold even with it connect correct I just put on opposite settings and go with it
Loraine H from ALBEMARLE, NC
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water valve leaking water nonstop
easy install 30-45min and a reset and it was done.
Philip from SAN ANTONIO, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not stop flowing.
*be sure to turn water off, unplug machine, and unscrew the water hoses from the rear of the washer. 1. Removed screws from the back of the washer, just the top part where the controls are. 2. Removed the panel. 3. Use a putty knife or screw driver to pop off the top panel. 4. Remove the screws from the inlet valve.<
... Read morebr />5. Unplug the wires connecting the inlet valve to the washer. 6. Lift out the old inlet valve. 7. Replace with the new inlet valve. 8. Plug the new wires into the washer. 9. Replace the screws in the inlet valve. 10. Replace the top. 11. Replace the rear panel and screws. 12. Reconnect the water hoses, careful not to mix the hot and cold. 13. Plug the machine back in and you're finished!
Replaced the mixer valve . It was a few screws, and an instruction video from YouTube.
jonathan from JOHNSTOWN, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
18 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DIANN
January 18, 2018
The plastic part on the cold water inlet valve broke. The hot and cold are on oposite ends. Do i need the whole part?
Hello Diann, Thank you for your inquiry. Yes, you would need to replace the entire valve. Hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
June 21, 2019
Washer works fine but water continues to drip in the washer when turned off. I have to shut the main supply off. Is this a bad water inlet valve?
For model number MVWC565FW0
Hi Jeffrey,
Thank you for your question. Yes, if you have water leaking into the tub when it is not in use, the issue would be the water inlet valve. A component in the valve has failed and it will need to be replaced. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Leilani
February 25, 2019
After i have loaded the washer and pushed the start button, the sensor light comes on, but water does not start filling the tub. I was told that this was because of the water input valve. Is this correct?
For model number NTW4605EW0
Hi Leilani, thank you for your question. Usually it is however you could test your valve with a multi meter to make sure it is working correctly. If it is then you may want to also take a look at your water level pressure switch as well. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chuck
June 28, 2021
The water keeps running without filling the washer. What should I look for to verify the faulty part?
For model number NTW4605EW0
Hello Chuck, Thank you for the question. We suggest testing the Water Valve. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
April 24, 2019
Mine (2015) had a water valve w10701459 in it. What replaces this water valve?
For model number NTW4605EW0
Hello Eric, thank you for inquiring. The correct replacement Water Inlet Valve for your model is part PS11773194.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
February 8, 2025
The water makes a loud whooshing sound only when filling on the rinse cycle. My research says it may could be the fill valve…or a kink in the filler hoses. I can not detect a kink in either hose. Should I replace the valve?
For model number MVWC565FW0
Hello Frank, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the water inlet valve, part number PS11773194, to solve the problem. A malfunctioning water inlet valve can most probably cause this problem. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kevin
December 9, 2019
My washer won't fill.
Hello Kevin, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Joseph
June 17, 2021
Water Inlet Valve, can only get cold water from all wash cycles, hot not working, at this time reason unknown, will the part work?
For model number MVWC565FW1
Hello Joseph, Thank you for the question. Yes, if the Hot Water is turned on and running from the water supply but the appliance will not fill with hot water, the Water Inlet Valve should be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Kostya
November 27, 2019
The clothes in the washer are half-dry and have stains all over them. Seems like some clothes have never been washed at all. Could it be that the inlet washer valve is bad so that it doesn't allow water in?
For model number MVWC565FW0
Hello Kostya, Thank you for the question. I suggest testing the valve with a multi meter to check for continuity. Hope this helps!
Was this helpful?
Thank you for voting!
Beth
May 16, 2019
My washer doesn’t leak but the cold water doesn’t flow. Will buying this part fix my problem?
For model number Ntw4605ew0
Hello Beth, thank you for inquiring. For this symptom you will want to replace either the Water Inlet Valve part PS11773194, the Cycle Switch part PS11754440, or the electronic Control Board part PS12114291. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11773194
Manufacturer Part Number: W11038689
