Refrigerator Pantry Drawer End Cap Right Side WPW10121977

Hello David, Thanks for your question. Yes, the end caps are considered from the point of view as one looks into the fridge. This applies for many major appliances, in fact. I hope this helps.

Hi Erik, Thank you for your question. There is a comment on our website listed with the part that a customer has left on how they installed the part, Obviously remove the glass shelf and supports plus all three drawers first. Being as there are no screws or visible means by which the Pantry Drawer End Cap is attached and being as the part entails removal of the vent slider from the back, there presents a problem. The backside of the end cap has hooks that clip into the side of the refrigerator wall. Use caution in raising the end cap up to release the clips. It does help using the screwdriver beneath the end cap and some movement with hands but it will come up along with the backside attachment. That isn’t the problem. The difficulty is in (1) noting and remembering how the assembly came off and apart. (2) Putting the moving parts inside of the end cap like they came out and (3) replacing the back and side at the same time. The back assembly has a clip that inserts to the left. It is important to insert that first. The side portion inserts by placing above the slots and pushing in (to the right) and down at the same time. It all comes together and you will wonder how you did it." I hope this helps. Thank you and have a great day!

Hello Genevieve, Thank you for your inquiry. The old glides and supports should work with the new part. We have provided a link to our repair video for removing and installing new pantry end caps on a Whirlpool refrigerator. We hope this helps and if you need a part in the future and need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Scott, Thank you for your question. There is a comment on our website listed with the part that a customer has left on how they installed the part, Obviously remove the glass shelf and supports plus all three drawers first. Being as there are no screws or visible means by which the Pantry Drawer End Cap is attached and being as the part entails removal of the vent slider from the back, there presents a problem. The backside of the end cap has hooks that clip into the side of the refrigerator wall. Use caution in raising the end cap up to release the clips. It does help using the screwdriver beneath the end cap and some movement with hands but it will come up along with the backside attachment. That isn’t the problem. The difficulty is in (1) noting and remembering how the assembly came off and apart. (2) Putting the moving parts inside of the end cap like they came out and (3) replacing the back and side at the same time. The back assembly has a clip that inserts to the left. It is important to insert that first. The side portion inserts by placing above the slots and pushing in (to the right) and down at the same time. It all comes together and you will wonder how you did it." I hope this helps. Thank you and have a great day!

Hi Brian, Thank you for your question. You will have to remove your pantry lid and then pull out your pantry drawer. Once you do that, there are a few screws on the parts. You would just unscrew those and remove your pantry end caps. I hope this helps. Good luck with your repair.