Dryer Timer 60 Hz. WP8299771

Hello Kathie, thank you for contacting us. That sounds like an issue with the timer. It should not pop out until its finished the cycle. You may need to replace this part to fix that issue. Hope this helps!

Hi Donna, thank you for your question. In the majority of cases, the part that generally causes this issue is your door lock switch itself. I hope that helps. Good luck with your repair.

Hello Randy, thank you for your question. Yes, it is possible, but the more likely issue is a thermostat, or fuse. We would recommend testing the thermostats and fuse before replacing the timer. I hope this helps!

Hi Mark, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses, you have four in your appliance. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. Good luck with your repair.

Hi Edward, thank you for getting in touch. Based on the description, we would suggest cleaning the dryer's vent. If that is not the case, you may need to check the moisture sensor, part number PS11723108, to fix the issue. We hope this solves your problem!