Refrigerator Door Handle Assembly WP67005380

Hello George, Thank you for your inquiry. You would need the door handle removal card that came with your user manual or a similar rectangular piece of plastic approximately 1/32” thick. At the right end, flex the handle base away from the surface of the freezer drawer. Simultaneously slide the door handle removal card that came with your refrigerator under the right side base of the handle. Slide the card to the line indication or until it stops, which will be approximately 11 /2". With both hands, firmly grasp the handle towards the right base. Slide toward the left, lift and remove from the surface. To install the new handle, align door handle clips slightly to the left of the tabs attached to the freezer door. Rotate the handle so the left base is flat against the door. Push the left handle base against the left door tab and slightly to the right, just enough to allow it to hang unsupported. While firmly supporting the left handle base against the door, align the right base of the handle with the right tabs that are attached to the door. Now, while firmly holding the handle at the left and right bases, gently slide the handle towards the right until the right base settles in. The handle should now be flat against the face of the freezer door at both the left and right bases. With hands still firmly keeping the handle flat against the freezer door, you may have to reverse directions momentarily to assure clip/tab engagement. Then firmly slide the handle to the right until it clicks. The audible "click" indicates that the fastening clips are securely interlocked. Good Luck with your repair!

Hi Kate, Thank you for your question. Yes, this would be the correct handle for your refrigerator. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hi Mary, thank you for asking. Yes the handle PS11743622 is the same for all three doors. The handles are sold individually. We hope this solves your problem!

Hello Donna, Thanks for your question. You will need to align the handle's metal clips with the brackets on the door. Be very careful as these pieces can be sharp. Slide the clips into the brackets and the handle should be able to attach to the door. I hope this helps.