Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This ice maker is for refrigerators.
Ice maker includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage in is full.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Noe A - October 15, 2023
Verified Purchase
Easy Replacement
A few screws and a couple of quick connect electrical connections and you’re done. Took me 10 minutes. Look up instructions on Youtube!
★★★★★
★★★★★
Ed P - November 18, 2022
Verified Purchase
Ice maker
Easy and works great
★★★★★
★★★★★
Edward D - February 11, 2021
Verified Purchase
KitchenAid 2016 Side By Side Ice Maker Replacement
Ice Maker stopped working. Ordering from PartSelect was quick and easy. Searched other sites and found them difficult to navigate. Replacement part came in 5 days and back up and running. Easy and good pricing!
★★★★★
★★★★★
Jeff C - October 24, 2022
Verified Purchase
Exact Part
Thanks to the PartSelect website, I was able to locate and order the right part to replace my ice maker without having to hire an appliance repair company.
★★★★★
★★★★★
Melody M - August 24, 2022
Verified Purchase
Working great so far
The part is working great so far, but so did the original and then it started popping out of place. Will have to see if it’s still working in a year.
★★★★★
★★★★★
Mark B - December 12, 2018
Verified Purchase
Worked as expected
The ice maker for my Whirlpool refrigerator stopped making ice after only 2 years. This replacement part was easy to install and fixed the problem immediately. I hope it lasts more than 2 years.
★★★★★
★★★★★
Brett H - January 11, 2023
Verified Purchase
Easy Repair
Works great
★★★★★
★★★★★
Paul M - January 6, 2023
Verified Purchase
Unfortunately did not fix
Great service, part delivers quickly and correctly. Easy installation. Unfortunately ice make still doesn't work because Maytag refrigerators suck. This is the 4th failure of this unit and 2nd replacement ice maker. Don't waste your time repairing this POS, buy a new one and NOT a Maytag (anything)
★★★★★
★★★★★
Louis L - October 6, 2023
Verified Purchase
Works as it should
Easy installation. Saved me hundreds of dollars in repair costs by doing it myself.
★★★★★
★★★★★
Kristi L - July 9, 2023
Verified Purchase
Easy to install I even did it without my husband
Works like a charm and no issues. Been using it for a good month or so. It does take like 24 hours to produce ice as you wanna throw the first few dumps out.
Easy plug and play and 4 screws I think.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 14 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker not making ice and dripping water
This is an easy fix. The hardest part was just determining which part to replace. But the Q&A's for the ice maker from this site steered me right. And their video on how to install was easy to follow. The only difference I found was my Whirlpool had only 2 electrical connectors instead of the 3 in the video. I finished the job in about
... Read more15 minutes so everything in my freezer stayed solidly frozen.
Read less
Allen from HOUSTON, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice cube tray had a loose part hanging down
Did my homework. Consulted Utube Bought the part Installed
Roger from BOULDER, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker dumped excess water into ice cube bin, then it would freeze.
Turned off power. Placed all frozen food in insulated containers. Removed all interior door parts to access ice maker, then removed the old ice maker. Dried everything with heat gun to make sure there were no ice obstructions. Installed new ice maker, interior door cover and ice bin. Turned on power, replaced food items shortly thereafter
... Read more. It seems to be operating just fine.
Read less
Karl from NEW BLOOMFLD, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not making ice
First turn off the ice maker. Then there's four screws in the very back you remove pull out the cover. There's hex head 516 bolts maybe quarter inch that hold in the ice maker unplug the ice maker reverse process
Jay from WOODWAY, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit making ice
1 turned off the unit 2 removed the cover panel be removing 4 Phillips head screws 3 unplugged the on off switch attached to the cover panel 4 removed the two 1/4 in nut head screws holding the ice maker 5 removed the ice maker and disconnected the power at the join 6 performed the above steps in reverse 7 t
... Read morehe unit has since been producing ice Repair appears to be a success
Read less
Ray from KILL DEVIL HL, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Quit Making Ice
In reading other post for this problem on the Parts Select web site, I checked the solenoids on the Inlet Valve (PN WPW10341320) located behind the refrigerator. A previous post indicated the solenoid should read between 500 and 1500 ohms. In checking, I read around 290 ohms, and confirmed the solenoid was ok. There were other items to ch
... Read moreeck, including the primary water inlet valve and filter. I confirmed water these were ok as the water dispenser on the unit worked properly, and the filter has been replaced on a regular basis. I Ordered a new Ice Maker (PN PS11738120) and replaced as directed in previous post. After several days, the new ice maker did not work. I removed the solenoid connector for the water dispenser which is located next to the ice maker solenoid on the inlet valve, and connected to the ice maker solenoid. I depressed the water flow switch located on the door and the solenoid opened, and dispensed water into the ice tray. I confirmed the solenoid was not the issue. I also was concerned about the ice maker over flow lever that is connected to the ice maker. this switch shuts off the ice maker if the ice level is too high. I checked the old ice maker and determined a blue and yellow wire were connected to the switch, and terminated in the buss connector that connects the ice maker and the refrigerator. in normal condition, the switch should be closed. when I checked the replacement ice maker, I found the switch was open, which kept power from turning on the water supply to the ice maker. Parts Select sent a replacement, and after installation, the unit worked properly. Issue solved.
Read less
Carl from WILMINGTON, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken icemaker
Removed nuts and bolts in order to remove ice maker unit, and 4 screws from the surrounding shell to get to said icemaker unit. I'd say it was a 15 minute job, but that's kind of a lie. It took me about a week of procrastination. And then 15 minutes to remove one unit and then put in the new unit. It's very easy unless you're really l
... Read moreazy. In which case it's still easy, the hard part is getting outta your recliner.
Read less
Tim from PARKER, CO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
16 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing ice cube tray.
My icemaker is on the freezer door. Open the freezer door and remove the ice bucket and turn ice maker swith off. There is a plastic cover you need to remove just 4 screws then work cover a little and it will pull out. You need to disconnect the wire connector for the on/off switch for icemaker. set cover aside. Now the ice cube tray is e
... Read morexposed. On the right side there is another wire connection unplug this also. There is a small wire cable on top of ice tray it just pops off tray and stays there. Under ice tray remove 2 screws and lift up and out to remove tray. to install new tray align clips on top and screw holes on bottom and reattache 2 screws. Now refit the small wire cable on top to new tray and also reconnect the wire connector on the right. To reinstall cover reconnect the on/off wire connector and push cover back on. Make sure cover is on the inside of door seal. Reinstall the 4 screws turn the on/ff switch to on rinstall the ice bucket and close the door your done.
Read less
Robert from STRONGSVILLE, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
11 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker quick working and made a clicking sound while trying to drop ice
Removed freezer cover from ice maker, unplugged the harness. Installed the new ice maker assembly,plugged in two wire harness and secured the part and cover. Results was smooth process, no noice from ice dispenser. Pleased with results. Saved on repairs. Thanks Tom
Thomas from HARPER, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My ice maker would only freeze for a short while, after unplugging it for a few hours it would begin to make ice again only to stop after a few trays
The repair went great, however, I had someone to put the part in for me.
Elizabeth from EDENTON, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
53 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
July 30, 2018
Is the icemaker part w10873791 fairly easy to replace. Is it a straight pull out, or do other parts need to be removed in order to replace it?
For model number KRSC503ESS00
Hi Jerry,
Thank you for your question. There is a video on our website that you can reference on how to install the ice maker. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS358591. I hope this helps. Thank you and have a great day!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Carla
March 13, 2019
The shut off arm on the ice maker was stuck in the up or off position and it wasn't making ice so i replaced the ice maker and the shut off arm is in the up or off position and i don't know if it is going to make ice or not. What can i do to make the shut off arm go down to the on position?
For model number WRS571CIDM02
Hi Carla,
Thank you for your question. If you have just installed a new ice maker, please allow 24 hours before it starts to make ice. The arm should be in the up position until it cycles. The ice maker has an automatic shutoff to keep the storage bin from overfilling during normal operation. As ice is made, the ice cubes will fill the ice storage bin, and the ice cubes will raise the shutoff arm to the OFF (arm up) position. When the storage bin is at full capacity, the ice maker will automatically stop ice production, but the ice maker On/Off switch will remain in the ON (up) position. Try and press the on/off switch and then lowering the arm manually to see if this helps. If it not you may have to refer to the diagnostics tech sheet that came with your refrigerator or contact Whirlpool for more information. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
ED
December 2, 2019
Ice maker not making ice. Will buying the complete ice maker fix problem or could the problem just be the water inlet valve
For model number WRS571CIDM01
Hello Ed, thank you for writing. More often than not on your model refrigerator, the Ice Maker itself would need to be replaced. This part number PS11738120 is the compatible replacement for your model. There is a chance that the water Inlet Valve, part number PS11753250 is the cause. You can inspect it for clogs and damage. I hope this helps, and good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 5, 2020
After my ice maker drops its cubes it begins to make a noise like someone knocking on the front door, very loud. Most times the cube tray does not return to the filling position. I can turn it off and later turn it on and it may make another tray of ice. But it can not be left alone.Do i need to splace the ice maker unit and how to i see the installation video?
thank you
For model number Model# 10651763510 Part# W10873791
Hello Jim, thank you for your question. Yes, it sounds like the icemaker should be replaced which is PartSelect Number: PS11738120. Unfortunately, we do not currently have installation instructions for this particular part. We do have some repair stories from other customers on our site that might help. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
March 4, 2019
Our KitchenAid fridge stopped making ice after only 3 years. Tried replacing the water inlet valve.... didn't help. we seem to get one tray of ice when the power is cycled. then it sounds like its trying to fill the tray. i don't think water ever makes it to the tray. what should i try next? thx.
For model number KRSC503ESS00
Hello Ed, thank you for inquiring. When the Ice maker is not making ice the first thing to try to replace is the Water Filter PS11701542 for your model KRSC503ESS00. The next thing would be the Ice Maker itself, part PS11738120. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
February 22, 2024
I ordered a new ice maker for my Whirlpool refrig today. This evening I'm doubting my diagnosis that it's the ice maker as it was totally dry when I removed it earlier today. Would the ice maker be dry if it's at fault or do you think the solenoid is responsible? The refrigerator is in my rental house so I'm trying to get it repaired ASAP for the tenants.....
For model number WRS571CIHZ00
Hello Nancy, thank you for reaching out. Based on our research, the issue could be most probably with the water inlet valve. Before replacing the ice maker, we would suggest replacing the water inlet valve, part number PS11753250, to solve the problem. Glad to be of assistance!
I really just need the ice maker head and arm assembly, not the mold or ancillary parts. Is this possible?
For model number Kenmore 106.51783412
Hello Rose and thank you for writing.
The ice maker for your model only comes in this assembly PS11738120. The parts are not sold individually. We hope this helps. Please contact us anytime if you require further assistance.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Megan
September 2, 2019
Hi, do you still have the tex tan saddle for sale? If so can you please give me a little more info on it such as what type of bars it's on, gullet width, and weight? May i please also have a side view picture of the profile of it to get an idea of the height of the back of the seat.
For model number WRS571CIDM01
Hello Megan, Thank you for the question. Very sorry but we do not list anything called a tex tan saddle for this Whirlpool Refrigerator. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. Hope this
2 people found this helpful.
Was this helpful?
Thank you for voting!
William
April 15, 2019
Ice maker wont make ice. Has water to door but the shut off arm only moves 1/4 inch and is in the down position
For model number 10651783412
Hello William, Thank you for the question. This sounds like the Ice Maker is defective and will need to be replaced. The Shut off arm is included. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
KATHY
May 29, 2019
3 year old side by side. Ice dispenser does not fill with water anymore. Motor works when push dispenser button. Water is going to fridge because water dispenser works fine. Replaced the filter, tried resetting fridge by unplugging for 30 seconds then pressing ice dispenser 3 times within 15 seconds of plugging fridge back in (as seen on you tube video suggestion). What part should i check next?
For model number whirlpool WRS571CIDM01
Hello Kathy, thank you for writing. For what you describe, you will want to consider the Single Primary Water Inlet Valve part PS11750831 or this Ice Maker. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
