Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This suspension rod kit is a genuine OEM kit specially designed for washing machines. Each kit includes a set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods are responsible for supporting the washer tub and allowing it to move freely during the wash and spin cycles while minimizing vibrations and noise. The suspension rods, balls and bushings may fail over time due to cracks, breaks, or excessive wear. If the suspension rod kit is faulty, you will likely notice excessive vibration or shaking during the spin cycle, loud banging noises, or the washer not balancing properly.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Terry H - January 27, 2022
Verified Purchase
The repair was easy after you-tube video
The part came fast and was an easy install. The washing machine is running like brand new. Thank you
★★★★★
★★★★★
Timothy P - December 27, 2018
Verified Purchase
WASHER REPAIR
ALL PIECES WERE THERE, INSTALLED IN WASHER AND MACHINE WORKING LIKE NEW AGAIN.
★★★★★
★★★★★
Charles A - July 3, 2018
Verified Purchase
didn't long to repair
part arrived super quick installed part washer back in proper working order
★★★★★
★★★★★
Jules T - March 26, 2022
Verified Purchase
Fixed the jumping jack!
Easy fix, the video was right on, half an hour later done!
★★★★★
★★★★★
Tony G - July 12, 2021
Verified Purchase
OEM IS THE WAY TO GO
I replaced the same parts with an aftermarket company and the suspension failed within a week so we decided to pay a little more and went with the OEM parts. So far so good and it's been 3 weeks.
★★★★★
★★★★★
Jerrald P - December 21, 2021
Verified Purchase
Video that was emailed made the washing machine repair a quick and successful repair.
The part was received quickly and the washing machine is working beautifully.
★★★★★
★★★★★
Brenda F - April 2, 2023
Verified Purchase
Worked Great!
Speedy delivery, easy to install with video provided! I’m a repeat customer and will continue to use Part Select!! We’ve saved hundreds of dollars repairing our appliances on our own!!
★★★★★
★★★★★
Fred S - June 22, 2019
Verified Purchase
It worked!
The washer had started jumping around violently every spin cycle. I couldn't figure out how to open the top until I watched the video. I couldn't tell there was anything wrong with the old parts, but now the machine works fine. Thank you PartSelect for a good video on the right model!
★★★★★
★★★★★
Katherine K - September 4, 2021
Verified Purchase
Easy fix
The whole process start to finish took 20-30 minutes. My husband watched the video and was easily able to complete. We did a load of laundry without our washer shaking on the spin cycle for the first time in a while ??. Easy fix and way more cost effective than hiring someone or buying a new washer.
★★★★★
★★★★★
Vincent R - July 17, 2019
Verified Purchase
Whirlpool Suspension.
I bought he replacement suspension rod kit. It arrived promptly and found one cup part was broken somehow. I called and received immediate help and a replacement part. They could not have been more helpful or concerned. I could not have ask for more.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 28 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
When washer would go into spin cycle it would shake violently. This also prevented the spin cycle from completing leaving clothes soaked
Followed videos sent with the repair items. It was very easy and solved my issue. My washer did not have the centering springs to begin with so I was unsure if I even needed them. But after replacing all the suspension rods and adding the pack of centering springs this has solved my issues
Suspension rods were worn; washer is 10+ years old
Replaced the suspension rods, suspension rod supports, main drive belt, tub centering springs, water supply hoes, and washer drain hose. Taped new front suspension rods to side of tub to ensure that they did not slide down when raising the washer off its back from the floor. Had a helper lift the tub, which made attaching the new suspensi
... Read moreon rods easy. The tub is extremely heavy so by a helper lifting it up it made attaching the new suspension rods much easier. IMPORTANT: According to the technician's manual, which was taped to the inside of the washer, it is absolutely necessary to recalibrate the washer after replacing any suspension parts. We did this by following the instructions in the tech manual. Failure to recalibrate a washer could result in poor performance. The procedure is different for each brand or model of washer, but again is absolutely essential after replacing suspension parts of any kind. For some unknown reason, our washer did not have the tub centering springs. Our model should have had the springs.Facing the washer, we attached one to the front left tub housing and one to right rear of the tub housing. Recommend that anyone watch the installation videos for the suspension rods, center springs, and main drive belt before attempting the repairs.
Watched video and followed instructions. Removed rods from top cups, laid washer on its side and pulled them out. Put new rods thru, stood washer up and hooked them in. Was pretty easy, tube heavy but I'm 52 and I did it myself. My only problem is there's no springs anywhere attaching rods to tub and I cannot find any info on 1. IF
... Read more I need them 2. What kind I need. I sent email to partselect last week inquiring and still waiting to hear.
Read less
Tricia from HARLEYSVILLE, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Extreme imbalance
This washer would not go into spin cycle without going out of balance no matter how we arranged the contents in the drum. We were looking to buy a front loader when I happened open this company with video instructions and positive comments from other people with the same issue. For the cost it was worth a try. Following the video and in l
... Read moreess than one hour the washer was back in service. It now operates like the day we installed it new. Highly recommend this fix which should save you hundreds on a new washer.
Read less
Jerry from OROVILLE, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shakes and moves | Noisy
Followed video on your web site, and used that for ways to fix, good directions. If I was more organized it prob would of taken about an hour or less
Philip from BURIEN, WA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer was vibrating very bad on large loads
Using the parts I ordered and following the instructions provided in the video from partselect.com made the repair very easy and solved the problem
I do not know much about washer repair and after watching how to replace the suspension rods I decided it was not as difficult as I thought. I replaced the suspension rods and springs and that fixed the problem. The price for parts was reasonable and I received my parts in 2 days.
Ask our experts a question about this part and we'll get back to you as soon as possible!
62 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lee Andre
August 26, 2017
The washer runs a complete cycle, but makes a clanging noise during the spin cycle. When you push the tub to the side when it is empty, it moves very easily in all directions. Its like the centering anchors or dampers are disconnected or broken. Do these rods control excessive movement of the tub? Do replacement rods solve the problem or are anchors for the rods also needed.
For model number wtw4800xq0
Hi Lee,
Thank you for your inquiry. Yes these suspension rods keep the tub stable and secure while your clothes are washing. This kit has all the parts you need. It has a set of 4 rods, 4 suspension balls and 4 bushings. I hope this helps. Thank you and have a great day!
118 people found this helpful.
Was this helpful?
Thank you for voting!
Courtney
December 18, 2018
My Amana washer has started shaking, moving, and making a loud noise while it spins. I was told new rods and springs make fix it but i noticed there is also suspension rod supports. Does the suspension rod kit come with all of these (rods, springs, and supports.) or would i need to buy them separately?
For model number NTW4600YQ1
Hello Courtney, thank you for your question. The Suspension Rod Kit PartSelect Number: PS11703290 would come with the supports, rods and springs. They would come assembled and ready to be installed. I hope this helps!
35 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
September 21, 2017
When the washer goes to spin cycle it shake every where making the main vibrate badly.
For model number CAW9244BW0
Hi Mike,
Thank you for your question. It sounds like you will have to check your suspension rods and drive block to see if they are still in working order. I hope that helps. Good luck with your repair.
26 people found this helpful.
Was this helpful?
Thank you for voting!
Boswell
November 26, 2017
I need the suspension rods for model number 2dwtw4740yq0 also the cost
For model number 2DWTW4740YQ0
Hello Boswell, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS11703290,This kit includes 4 suspension rods.Please enter the part number into the site to check current price and availability. Good luck with the repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Elishouzabeth
April 26, 2018
Should the tub be very loose
For model number Ntw465oyqo
Hi Elishouzabeth,
Thank you for your question. The tub should be firmly in in place. If it is loose and it is banging, then the shock absorbers may need to be replaced. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
David
February 7, 2018
Are these rods supposed to be held back with a zip tie? Each four of the rods has a zip tie around it causing each rod to bend in the exact place. It appears as though the rods themselves are straight, not bent. Are the zip ties something put on during shipping that were supposed to be removed but weren't? It looks as though they are intended to maybe be shock absorbers?
Hi David,
Thank you for your question. It actually sounds like they were not removed. The support rods are supposed to be straight and there are usually no zip ties holding them to anything. I hope that helps. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Jennifer
April 23, 2018
Hello Jennifer, can you please tell me if the part number w10780048 is the correct part number for suspension rod kit for my Maytag washer model # mvwc200xw0. Thank you so much for your time. Have a wonderful day.
For model number MVWC200XW0
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11703290. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Marcy
January 8, 2019
Maytag washer gets out of balance and bangs. Suspect suspension rods. Need to know if your part number ps11703290 will fit Maytag mvwc200xw2 top load washer.
For model number MVWC200XW2
Hello Marcy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11703290. Thank you for your inquiry, good luck with this repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
April 7, 2018
How to remove old suspension rods?
Hello Rick, Thank you for your inquiry. We have found general instructions to give you an idea of the procedure to remove the old rods. Unthread the rear screws securing the main top to the cabinet. Remove the top or lift it up and support it. Lift up on the old suspension rods and rotate the ball supports to detach the support and hook the rear rods onto the support brace. Next remove all of the bushings from the braces. Now lower the main top back down or replace it, as we are now going to have to tip the washer so it rests on its rear panel. You should be now able to slide the old suspension rods out. You need to push on the spring to unhook the rear rods from the brace before you can remove them. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
May 7, 2018
I am looking for a suspension/rod kit. I didn't see my model listed. What part number do i need to order?
For model number WTW4800XQ0
Hello Mark, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11703290. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/Washer-Springs-and-Shock-Absorbers.htm"},{"position":3,"name":"W10780048","title":"W10780048","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
