Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is a clutch designed for use within top-load washers. The clutch is used to engage the transmission of your washer during the agitation and spinning cycles, to ensure it runs properly. If your washing machine is not agitating or spinning properly, the clutch could be the problem, and it will need to be tested and then potentially replaced. To replace the clutch in your washing machine, you will need to disassemble your washer from underneath, and will need a socket wrench and screwdriver as a result. This clutch is an OEM part and is only sold with a single securing screw.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Spinning Issues | Will not agitate | Will Not Start | Spins slowly
This part works with the following products:
Washer.
Part# W10754448 replaces these:
AP5956756, W10447973, W10817398, W10905022
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
34 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rachel
April 5, 2019
Could the clutch cause the agitator to not work and have a grinding sound
For model number MVDB835DW0
Hello Rachel, Thank you for the question. Yes, a defective clutch can cause a grinding noise and effect the agitating. Thank you for your inquiry, good luck with this repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
November 30, 2022
During diagnostic test washer agitates fine but makes noise during spin cycle. Also getting F7/E5 code. Is the clutch the likely issue?
For model number 11026132410
Hello Pat, thank you for reaching out. The F7-E5 error code is a shifter fault error code. The most common problem related to this error code is going to be that the shifter has failed. We would recommend replacing the Clutch, part number PS10064562. The clutch shifts the mode of the cycle from agitate to spin. As your unit has a direct drive motor with no belt, then this clutch operates as the mode shifter does. We hope this information helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
December 20, 2021
I have a top load Maytag washer. I have an error code F7E4. Can this be related?
For model number MVW7232HW0
Hello Paul, thank you for your question. Error code F7E4 does mean a clutch failure. First unplug the washer and check the clutch for obstructions. Remove any obstructions. Replace the clutch if damaged. We hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
September 5, 2023
I have an F7/E5 error code for my whirlpool washer. Is this the clutch or the shifter sensor that would be causing this?
For model number wtw8040dw4
Hello Rick, thank you for your inquiry. The F7E5 error code means that your shifter actuator is not shifting the transmission into spin or agitate properly. This is not something you can just reset, the shift actuator is part of the clutch, part number PS10064562. We would recommend replacing the clutch to fix this error. We hope this solves your problem!
4 people found this helpful.
Was this helpful?
Thank you for voting!
George
January 15, 2020
Washer is making different sound in the bottom & flings water on spin cycle. Does clutch kit come with bearing & seal. I ordered slider thinking #7 was bearing. Ps was fast getting part.
For model number Mvwb835dwo
Hello and thank you for writing.
We are glad you received the order in a timely manner. The clutch does not include the bearing and seal. The tub bearing and seal kit is part PS3503261. We hope this helps. Please contact us anytime if you require further assistance.
I get a very high-pitched squealing noise, like a belt slipping, when spin startup occurs. I believe this model is direct drive, so no belt. Error code is F3 E2 which doesn't seem to be related. Under heavier loads (1 blanket or comforter) the water often does not drain at all. Lighter loads will drain fully.
For model number WTW8040DW2
Hi Doug, thank you for contacting us. According to our research, the error code F3E2 indicates an issue with the washer temperature control. We would suggest resetting the washer by unplugging it from the outlet for at least 1 minute and then plugging it back in. Considering the symptoms you mentioned, the drain and noise issue might be caused by a faulty drain pump, part number PS11738156. We hope this helps, good luck with this repair!
Washer makes noise when agitating. Like a grinding and clunking noise what could that be
For model number MVWB835DW1
Hi Jeff, thank you for the question. Based on our understanding of the issue, we would suggest you make sure there are no foreign objects stuck in the washer drum or seal. If that is not causing the issue, then you may need to check the gearcase, part number PS12741641, as it is the most likely cause of this issue. If the gearcase is faulty or worn out, you may need to replace it. We hope this helps!
hi ,
there is times my washer machine leaves my clothes socked in water like it did not go through the spinning cycle .
does it mean the clutch is bad?
For model number mvwb765fw0
Hi Gerardo, thank you for getting in touch. Too much clothing can create an imbalance in the washer tub that reduces spin speeds, leaving clothes wet. Remove some items and redistribute others to balance the washer drum before running another drain and spin cycle. Make sure your drain hose is not kinked and the drain pump is not clogged. If this does not help, we recommend replacing the drain pump, part number PS11738156. The washer will not spin if it cannot drain properly or if the pump filter is clogged. Good luck with your repair!
Replaced the slider assembly, due to grinding noise and it was worn out. Now it makes a loud whirring noise at spin cycle what could be the culprit? clutch?
For model number MVWB865GW0
Hi Veronica,
Thank you for your question. If you hear a grinding noise when the washer is in use, the bearing on the gearcase is worn or damaged and it will need to be replaced. The part number for the gearcase is PS12741641.We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Leo
December 13, 2019
Washer makes a loud whirring noise in spin cycle like a bad bearing could it be the clutch
For model number Mvwb835dwo
Hello Leo, thank you for writing. Yes, this could be due to a faulty Clutch, this part number PS10064562 for your model washer. You may also want to consider the Drum Shaft Assembly, part number PS11723032. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/Washer-Transmissions-and-Clutches.htm"},{"position":3,"name":"W10754448","title":"W10754448","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
