ZCG3500DSS-01 General Electric Trash Compactor - Overview
Sections of the ZCG3500DSS-01
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - 10 Pk
PartSelect #: PS257999
Manufacturer #: WC60X5015
The compactor bag is used in a trash compactor, where trash is compressed. This bag is made of a stronger plastic material so that it is able to contain a large amount of trash. It is also strong enou...
$47.95
In Stock
Gear Box Kit
PartSelect #: PS257534
Manufacturer #: WC22X5028
This is a gearbox kit for a trash compactor. The outer casing of the part is made of metal and measures 5 inches wide and 7 inches tall. The gearbox is run by the motor, and allows the trash compactor...
No Longer Available
Drive Chain
PartSelect #: PS257527
Manufacturer #: WC22X5021
Also known as Endless Chain. Sold individually.
No Longer Available
Manuals & Care Guides for ZCG3500DSS-01
Click to downloadInstall
Installation Instructions
(0.31MB)
Specs
Product Specifications Sheet
(0.04MB)
Care
Use and Care Manual
(0.35MB)
Questions And Answers for ZCG3500DSS-01
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ram was stuck in the down position, would not return up.
1.I removed the back of the compactor
2. turned the large nut to raise the ram so I could remove the trash container
3. removed the bolt holding ram plunger onto the actuator
4. put the chain on by starting it on the large sproket and walking it around. there was enough slack to do it this way.
5. cleaned and oiled eve ... Read more rything and reassembled.
2. turned the large nut to raise the ram so I could remove the trash container
3. removed the bolt holding ram plunger onto the actuator
4. put the chain on by starting it on the large sproket and walking it around. there was enough slack to do it this way.
5. cleaned and oiled eve ... Read more rything and reassembled.
Read less
Parts Used:
-
Ian from Camano Island, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!