ZCG3300VWW-01 General Electric Trash Compactor - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ram was stuck in the down position, would not return up.
1.I removed the back of the compactor
2. turned the large nut to raise the ram so I could remove the trash container
3. removed the bolt holding ram plunger onto the actuator
4. put the chain on by starting it on the large sproket and walking it around. there was enough slack to do it this way.
5. cleaned and oiled everything and reassembled.
2. turned the large nut to raise the ram so I could remove the trash container
3. removed the bolt holding ram plunger onto the actuator
4. put the chain on by starting it on the large sproket and walking it around. there was enough slack to do it this way.
5. cleaned and oiled everything and reassembled.
Parts Used:
-
Ian from Camano Island, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!