Y25 Yard Machines - Overview
Models starting with Y25
Click on the best match to narrow your results.
- Y25 Yard Machines Trimmer (Yard Machines String Trimmer Model Y25 Parts)
- Y25 (41AD251C900) Yard Machines Trimmer (Trimmer)
- Y25 (41AD251G900) Yard Machines Trimmer (Trimmer)
- Y2500 (41AD25CC800) Yard Machines Trimmer (Trimmer)
- Y2500 (41AD25CC900) Yard Machines Trimmer (Trimmer)
- Y2500 (41BD25CC900) Yard Machines Trimmer (Trimmer)
- Y2500 Yard Machines Trimmer (Yard Machines String Trimmer Model Y2500 Parts)
- Y2510 (41AD110G900) Yard Machines Trimmer (String Trimmer)
- Y2530 (41AD130G900) Yard Machines Trimmer (Gas String Trimmer)
- Y2550EC Yard Machines Trimmer (Yard Machines String Trimmer Model Y2550EC Parts)
- Y2550EC (41AD25SC800) Yard Machines Trimmer (Trimmer)
- Y2550EC (41AD25SC900) Yard Machines Trimmer (Trimmer)
- Y2550EC (41BD25SC900) Yard Machines Trimmer (Trimmer)
- Y2560 (41AD160G900) Yard Machines Trimmer (String Trimmer)
- Y2580 (41AD180G900) Yard Machines Trimmer (Gas String Trimmer)
- Y25B (41ARY25B900) Yard Machines Leaf Blower / Vacuum (Yard Machines Handheld Blower)
- Y25BT (41AD25BT900) Yard Machines Leaf Blower / Vacuum (Gas Blower)
- Y25CP (41AD25CP900) Yard Machines Trimmer (Yard Machines String Trimmer)
- Y25PB (41AR25PB900) Yard Machines Leaf Blower / Vacuum (Yard Machines Handheld Blower)
- Y25PS (41AD25PS900) Yard Machines Pole Saw (Yard Machines Pole Saw)
- Y25SP (41AD25SP900) Yard Machines Trimmer (Yard Machines String Trimmer)
- Y25T (41ADY25T900) Yard Machines Trimmer (Yard Machines String Trimmer)
Keep searches simple, eg. "belt" or "pump".
Trimmer Fuel Tank Assembly
PartSelect #: PS10009586
Manufacturer #: 753-06183
This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plast...
$15.20
Special Order
Trimmer Bump Head Knob
PartSelect #: PS9306452
Manufacturer #: 791-153066B
This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this...
$14.78
In Stock
Trimmer Carburetor
PartSelect #: PS9119300
Manufacturer #: 753-06190
It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes...
$39.54
In Stock
Snow Blower Locking Flange Nut
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$5.95
In Stock
Trimmer Small Clutch Assembly
PartSelect #: PS9303676
Manufacturer #: 753-05860
This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engin...
$28.58
In Stock
Impeller Assembly
PartSelect #: PS16429077
Manufacturer #: 753-08491
This is an impeller assembly kit designed for use with various models of leaf blower and comes with all the hardware necessary to replace it, including the impeller, the securing nut and 1 washer for ...
$9.76
In Stock
Trimmer Inner Reel
PartSelect #: PS9119496
Manufacturer #: 753-1155
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
$24.40
In Stock
Trimmer Lower Shaft Housing Assembly
PartSelect #: PS9118819
Manufacturer #: 753-06214
Introducing the Lower Shaft Housing Assembly from MTD, synonymous with quality and precision. This assembly serves as a key component within your MTD appliance, adding functionality, resilience and du...
No Longer Available
Common Symptoms of models starting with Y25
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Cutting line does not come out
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Parts Used:
-
Erik from ROBERTSDALE, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
string trimmer would not start
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines o
... Read more
nto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Read less
Parts Used:
-
john from SHARPSVILLE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trimmer Would Not Start
The replacement of the carburetor, O-ring, and gasket was simple. I removed 2 screws that held the air cleaner and carburetor in place, swapped them out, and replaced the screws. What took longest was finding a piece of fuel line after breaking one of them. It was brittle after hanging in my garage for several years. I found some in my
... Read more
garage and replaced it. It took a few pulls to get it started, but ran very smooth.
Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues.
Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues.
Read less
Parts Used:
-
Ricardo from FORT WORTH, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!