Back
Back
Keep typing for more specific results...

WF203ANS/XAX Samsung CE Washer - Overview

Sections of the WF203ANS/XAX

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Washer Drain Pump (120V) – Part Number: DC31-00054A
Washer Drain Pump (120V)
★★★★★
★★★★★
(19)
PartSelect #: PS4204638
Manufacturer #: DC31-00054A
This is a 120 volt, 60 hertz drain pump assembly for a washing machine. It is a genuine OEM part. This pump helps expel water from the washing machine, and is activated after the spin speed is maintai...
$163.30
  In Stock
Water Valve – Part Number: DC62-30314K
Water Valve
★★★★★
★★★★★
(2)
PartSelect #: PS4209100
Manufacturer #: DC62-30314K
One solenoid valve for hot water
$84.95
  In Stock
Washer Water Valve – Part Number: DC62-30312J
Washer Water Valve
PartSelect #: PS4209090
Manufacturer #: DC62-30312J
$128.95
  In Stock
Water Temperature Thermistor – Part Number: DC90-10128N
Water Temperature Thermistor
★★★★★
★★★★★
(1)
PartSelect #: PS4214274
Manufacturer #: DC90-10128N
The thermistor monitors and helps regulator the water temperature in the washer.
$54.95
  On Order
Door Glass – Part Number: DC64-00504C
Door Glass
★★★★★
★★★★★
(2)
PartSelect #: PS4210731
Manufacturer #: DC64-00504C
Explore the sturdiness and functionality of the Samsung Washer Door Glass. Fitting perfectly with a set of Samsung Washer models, it is a high-quality door glass, designed with an eye for detail by Sa...
$155.15
  On Order
Washer Tub Gasket Seal – Part Number: DC69-00804A
Washer Tub Gasket Seal
★★★★★
★★★★★
(1)
PartSelect #: PS4213806
Manufacturer #: DC69-00804A
This is a seal for various models of Samsung washing machines. This part acts as a seal for the rear and front outer part of your washing machine tub and is used to prevent any matter of leaks. If you...
$35.95
  In Stock
Drain Pump – Part Number: DC96-01414A
Drain Pump
PartSelect #: PS4216974
Manufacturer #: DC96-01414A
Assembly PUMP DRAIN;WF337AAW
$192.03
  In Stock
Clamp Diaphragm Assembly – Part Number: DC97-04981D
Clamp Diaphragm Assembly
PartSelect #: PS4218225
Manufacturer #: DC97-04981D
$26.95
  In Stock
Door Lever – Part Number: DC66-00326A
Door Lever
PartSelect #: PS4212119
Manufacturer #: DC66-00326A
This is a door lever strike for Samsung washing machines. This part is used to latch and hold the washer door to the washer door frame when it is closed. If the door strike for your washer is currentl...
$12.95
  On Order
Fixer Tub Assembly – Part Number: DC97-07448D
Fixer Tub Assembly
PartSelect #: PS4218777
Manufacturer #: DC97-07448D
This is a shipping bolt designed by and for Samsung washing machines. This shipping bolt is installed in the back of the washer before transporting it to securely fasten the tub of the washer so it do...
$36.95
  In Stock
Valve – Part Number: DC62-00202A
Valve
PartSelect #: PS4208698
Manufacturer #: DC62-00202A
$6.95
  In Stock
Drawer Housing Assembly – Part Number: DC97-08800A
Drawer Housing Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS4219126
Manufacturer #: DC97-08800A
$54.95
  In Stock

Questions And Answers for WF203ANS/XAX

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the WF203ANS/XAX

[Viewing 1 of 1]
Will not drain
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Code indicating washer was NOT discharging water
Watched the video, procedure was simple and as depicted on the video. Started by using a wet shop Vac to the discharge hose and sucked as much dirty wash water out as possible. Removed the pump,and found the motor did not turn freely. Removed the motor (3 screws) and replaced the motor with new part. Reassembled the washer, everything worked as it should. After about 3-4 loads of laundry, the "Not Draining" code / problem returned. Again, sucked out the water with the Shop Vac. Checked the Filter /Cleanout and found it completely packed with MUD. Cleaned that out, and again disassembled the washer. The pump was removed and the remaining muddy gunk was cleaned from the impeller. The 3 drain lines that attached to the pump were inspected for blockage/obstruction and flushed of any muddy residue. Reassembly was quick and easy, and the washer has worked well since. I have no idea how the dirt got into the system with enough dirt to gunk up the system. Recommend keeping more frequent inspections of the cleanout trap.
Parts Used:
Washer Drain Pump (120V)
  • SCOTT from VERNAL, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The drain check valve leaked
The part did not fit this model. The flap part fit the hole but the seal ring is too big. I cut 1\4inch out and used super glue the make it small enough to fit and seal the hose. Make sure you only use a drop of glue and keep the seal even and flat so it will seal
Parts Used:
Valve
  • scott from DEERFIELD, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!