RGJ534GEP1 Hotpoint Wall Oven - Overview
Sections of the RGJ534GEP1
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Oven Door Seal
PartSelect #: PS244580
Manufacturer #: WB32K5050
This door seal goes around the oven body to help seal in the heat of the oven.
No Longer Available
Electronic Clock Control Kit
PartSelect #: PS238616
Manufacturer #: WB27T10327
This kit is equipped with the oven control, faceplate and any necessary installation wires. This part may look different from the original, but should still function the same. The wiring is different,...
No Longer Available
Control Panel End Cap (Black) (Right Side)
PartSelect #: PS245961
Manufacturer #: WB36K5129
$50.95
Special Order
Control Panel End Cap - Black - Left Side
PartSelect #: PS245960
Manufacturer #: WB36K5128
No Longer Available
Questions And Answers for RGJ534GEP1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
oven door seal was old and falling apart
at first thought the seal would just slide out and the same for the replacement. when I realized that this was not the case and began to wonder what....? I saw the screws at top and bottom, took them off and voila the inner shell moved forward enough to take out the old, slide in the new, push in, replace the screws and back to a happy w
... Read more
ife with an oven that can bake correctly again
Read less
Parts Used:
-
eric from washington, DC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
56 of 67 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gas valve quit working
Very easy, didn't even have to take the oven out of the wall. Will use this site again.
Parts Used:
-
chris from FORT BRAGG, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the oven seal was dried out and crumbling not safe to use on a gas appliance
From what I was able to find info on I was to take out 5 screws 3 on top and 2 on the bottom then the inner oven box is suppose to pull out a bit to take the old gasket off and put the new onw on the box was so rusty it would not pull out so I was able to get enough of the box out using a large screwdriver the lip of the gasket tucks behi
... Read more
nd the box. I ended up using a small screwdriver to work the new gasket behind the oven box. The door now needs new springs the tension on them is not strong enough to pull the door shut the way it should there's still room to push the door into new gasket.
Read less
Parts Used:
-
jim from SAVAGE, MN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!