Back
Back
Keep typing for more specific results...

PEB7227SL1SS General Electric Microwave Oven Combo - Overview

Sections of the PEB7227SL1SS

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Microwave Door Interlock Switch Bracket – Part Number: WB14X10049
Microwave Door Interlock Switch Bracket
★★★★★
★★★★★
(5)
PartSelect #: PS3486543
Manufacturer #: WB14X10049
The door interlock switch bracket houses and supports the door switches.
$47.95
  In Stock
Order within the next 11 hrs and your part ships today!
MICRO SWITCH(STAND ON) – Part Number: WB24X10146
MICRO SWITCH(STAND ON)
PartSelect #: PS1019163
Manufacturer #: WB24X10146
$44.95
  In Stock
Order within the next 11 hrs and your part ships today!
Microwave Glass Turntable Tray – Part Number: WB48X29704
Microwave Glass Turntable Tray
★★★★★
★★★★★
(1)
PartSelect #: PS12295296
Manufacturer #: WB48X29704
The turntable tray rotates in the center of the microwave to help ensure the food cooks evenly.
$82.40
  In Stock
Order within the next 11 hrs and your part ships today!
ROTATING RING Assembly – Part Number: WB31X29703
ROTATING RING Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS12296200
Manufacturer #: WB31X29703
$24.95
  In Stock
Order within the next 11 hrs and your part ships today!
DOOR LATCH – Part Number: WB10X30407
DOOR LATCH
PartSelect #: PS12342114
Manufacturer #: WB10X30407
$13.95
  In Stock
Order within the next 11 hrs and your part ships today!
LEVER SWITCH – Part Number: WB10X27080
LEVER SWITCH
PartSelect #: PS12170282
Manufacturer #: WB10X27080
Presenting the GE Lever Switch, an essential component for your microwave. This door interlock switch lever serves a critical duty - it activates the interlock switch whenever the microwave door is cl...
$36.95
  In Stock
Order within the next 11 hrs and your part ships today!
DOOR LEVER – Part Number: WB10X27075
DOOR LEVER
PartSelect #: PS11736295
Manufacturer #: WB10X27075
$14.95
  In Stock
Order within the next 11 hrs and your part ships today!
TT COUPER – Part Number: WB02X29702
TT COUPER
PartSelect #: PS12296713
Manufacturer #: WB02X29702
$13.95
  In Stock
Order within the next 11 hrs and your part ships today!
RANGE FOOT – Part Number: WB01X27076
RANGE FOOT
PartSelect #: PS12170163
Manufacturer #: WB01X27076
Sold individually.
$20.95
  Special Order
LAMP – Part Number: WB25X27079
LAMP
PartSelect #: PS11736331
Manufacturer #: WB25X27079
$53.85
  On Order
Main Control Board – Part Number: WB27X29710
Main Control Board
PartSelect #: PS12296266
Manufacturer #: WB27X29710
$105.79
  In Stock
Order within the next 11 hrs and your part ships today!
High-Voltage Diode – Part Number: WB27X25616
High-Voltage Diode
PartSelect #: PS11762547
Manufacturer #: WB27X25616
$49.95
  In Stock
Order within the next 11 hrs and your part ships today!

Questions And Answers for PEB7227SL1SS

Ask our experts a question about this model and we'll get back to you as soon as possible!

11 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
September 13, 2023
The turntable constantly turns, even when the door is open.
For model number PEB7227SL1SS
PartSelect logo
Hello Craig, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the door interlock switch, part number PS1019163, to fix the issue. The microwave turntable turns with the open door because of a malfunctioning door interlock switch. We hope this solves your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
ANISE
December 10, 2024
When I start the microwave, I hear loud bangs from the right wall and smoke comes out from the screen on the right side. What is causing this?
For model number PEB7227SL1SS
PartSelect logo
Hi Anise, Thank you for your question. If the magnetron or the diode are malfunctioning, they can cause loud noises. To verify which part is causing the issue, unplug the microwave from the electrical outlet and test these parts for continuity with a multimeter on the Rx1 setting. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to release the charge. When testing the diode, touch the multimeter probes to the terminals, and then check for continuity in the opposite direction by reversing the probes. There should be continuity in one direction, but not both. If your diode shows continuity in both directions or does not show continuity in either direction, you will need a replacement high voltage diode. For the magnetron, touch one probe to a terminal and the other to the metal housing of the magnetron, this test should indicate that there isn’t continuity. Next, touch both probes to the terminals, this should produce a reading of two to three ohms. If your test results differ from the above, you will need a replacement magnetron. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
WILLIAM
March 13, 2025
Microwave keeps blowing fuses and tripping the circuit breaker.
For model number PEB7227SL1SS
PartSelect logo
Hi William, thank you for reaching out. Based on our understanding, we would suggest checking the high-voltage capacitor, part number PS12296267. You may need to replace it to fix the issue. We hope this solves your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Patty
16 days ago
What is the part number for base bracket that the microwave mounts on that above the oven - cabinetry.
For model number PEB7227SL1SS
PartSelect logo
Hello Patty, thank you for getting in touch. According to our research, the part you are requesting is the baseplate, part number PS12299335. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
WILLIAM
May 6, 2024
Tray continues spinning when door is open for the past several months. Now, the microwave won't turn on.
For model number PEB7227SL1SS
PartSelect logo
Hi William, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the control panel assembly, part number PS12743006, to fix the issue. Good luck with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3

Common Symptoms of the PEB7227SL1SS

[Viewing 1 of 1]
Door stuck closed
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave door was hard to open
1. Take out the case by unscrew 8 screws on the back and side of the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
Parts Used:
LEVER SWITCH Microwave Door Interlock Switch Bracket
  • Henry from NORWALK, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door locks. Not opening.
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.
Parts Used:
Microwave Door Interlock Switch Bracket
  • Jay from WESLEY CHAPEL, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!