Parts That Fix Maytag Washer MVW6230RHW0 Will Not Start

This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the latch when the door is closed. It keeps the door securely shut so that the washer can start and prevents it from swinging open while the washer is running. It is a safety mechanism that prevents water leakage, injuries, and damage to the washer. If the door strike is damaged or worn down, it may be unable to lock the door properly and the washer may stop mid-cycle or fail to start altogether. Replace the door strike promptly to ensure the proper functioning of your washer.

This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer transmission during the different phases of the wash cycle. This allows the washer to switch between agitating and spinning modes. Signs of a faulty shift actuator include the washer failing to agitate or spin, incomplete cycles where the washer gets stuck in one phase, or unusual noises during operation

This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.