Back
Back
Keep typing for more specific results...

MGD6230HC2 Maytag Dryer - Overview

Sections of the MGD6230HC2

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Dryer Idler Pulley – Part Number: 279640
Dryer Idler Pulley
★★★★★
★★★★★
(132)
PartSelect #: PS334244
Manufacturer #: 279640
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$25.95
  In Stock
Dryer Lint Filter – Part Number: W10120998
Dryer Lint Filter
★★★★★
★★★★★
(120)
PartSelect #: PS1491676
Manufacturer #: W10120998
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint...
$42.95
  In Stock
Dryer Drum Support Roller – Part Number: WPW10314173
Dryer Drum Support Roller
★★★★★
★★★★★
(40)
PartSelect #: PS11752609
Manufacturer #: WPW10314173
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separ...
$18.88
  In Stock
Multi Rib Belt – Part Number: 661570
Multi Rib Belt
★★★★★
★★★★★
(55)
PartSelect #: PS382430
Manufacturer #: 661570
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"...
$24.11
  In Stock
Dryer Igniter Kit – Part Number: 279311
Dryer Igniter Kit
★★★★★
★★★★★
(42)
PartSelect #: PS334180
Manufacturer #: 279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-in...
$35.67
  In Stock
Dryer Thermostat Internal bias – Part Number: WP8577274
Dryer Thermostat Internal bias
★★★★★
★★★★★
(35)
PartSelect #: PS11746740
Manufacturer #: WP8577274
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
$35.67
  In Stock
Dryer Tri Ring – Part Number: WPW10512946
Dryer Tri Ring
★★★★★
★★★★★
(5)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$10.95
  In Stock
Dryer Radiant Flame Sensor – Part Number: WP338906
Dryer Radiant Flame Sensor
★★★★★
★★★★★
(12)
PartSelect #: PS11741429
Manufacturer #: WP338906
If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor if it is hot enough ...
$34.95
  In Stock
Idler Pulley w/Bracket – Part Number: W10837240
Idler Pulley w/Bracket
★★★★★
★★★★★
(46)
PartSelect #: PS11726337
Manufacturer #: W10837240
The idler pulley with bracket ensures proper tension on the dryer’s drive belt, allowing the drum to spin effectively. This assembly includes the pulley and arm, making it ideal for replacing a worn o...
$27.24
  In Stock
Dryer Electrode Sensor – Part Number: WP3387223
Dryer Electrode Sensor
★★★★★
★★★★★
(15)
PartSelect #: PS11741408
Manufacturer #: WP3387223
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$9.95
  In Stock
Refrigerator Light Bulb 10w – Part Number: WP22002263
Refrigerator Light Bulb 10w
★★★★★
★★★★★
(16)
PartSelect #: PS11739347
Manufacturer #: WP22002263
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$17.95
  In Stock
Dryer Screw – Part Number: WP90767
Dryer Screw
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
  In Stock

Questions And Answers for MGD6230HC2

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the MGD6230HC2

[Viewing 8 of 8]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
felt strip came off lint screen
ordered new lint screen, removed old screen, inserted new screen.
Parts Used:
Dryer Lint Filter
  • JEFFREY from FALL RIVER, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
222 of 277 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very Loud Squeaking Noise
1) Disconnected power cord from wall. 2) Disconnected vent hose from back of dryer. 3)Removed dryer rear panel. 4)Disengaged tension spring on idle wheel arm. 5) Removed worn idle wheel. 6)Installed new Idler wheel assembly. 7) Vacuumed dust from rear of dryer (optional, recommended). 8) Reinstalled rear cover, vent hose and power cord. Easy repair 15-30
Parts Used:
Dryer Idler Pulley
  • GREGORY from Wilsonville, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
75 of 96 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat to dry clothes
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yrs old, married and mother of two.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
Parts Used:
Dryer Igniter Kit
  • Karen from Pine Mtn. Club,, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
66 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!