LSXS26326W (ASWCNA6) LG Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice chute would not open.
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Parts Used:
-
Steve from MUKWONAGO, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
18 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise coming from refrigerator
Opened the back and noticed a fan blade off making the motor unbalanced. Ordered a new fan and motor and went to (you tube ) that explained the whole procedure. Couldn’t get any easier.
Parts Used:
-
Herb from YUMA, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water valve stopped working after a power surge
Unplugged the power cord. Shut off water supply to the refrigerator. Removed the water supply and distribution lines one at a time and reinstalled the new lines as I went along.
Turned water supply back on and plugged the power cord back into the wall outlet. Tested the operation and viola…it works great now!
A great big thank you for your professional and well established service.
Turned water supply back on and plugged the power cord back into the wall outlet. Tested the operation and viola…it works great now!
A great big thank you for your professional and well established service.
Parts Used:
-
Dan from PITTSFIELD, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold water control rusty and leaking water
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Parts Used:
-
Homer from MARION, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring was broken on original unit, had to replace whole lever.
removed old lever ( 2 screws ) took apart electrical connection, replaced lever, connected electrical hookup, put in screws. DONE !!!!!!
Parts Used:
-
Alan from Sun City West, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change filter light came on
-
Ralph from VALLEY SPGS, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!