LRSDS2706S LG Refrigerator - Instructions

Refrigerator door needs to be open all the way and still you have to squeeze to glass shelf in to place. It needs to go in straight and make sure the placement is correct. It may seem like it doesn't fit but it does, it is very, very tight.

Turn off the power to the refrigerator. Remove the back plate. Unplug the fan motor. Remove the fan housing and pull the fan blade from the motor. Replace the motor by removing 4 screws. Replace with the new motor and reinstall the fan blades. Secure the fan housing, plug the fan motor, and screw on the back panel. Plug and go!

I didn't because the part was never delivered.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.

Remove old shelf and basket first. Remove shelf in door, to give you more room. Carefully slide you glass shelf in. Go slow and be patient, it's very tight. I was nervous it was going to break putting it in. Must go at it straight and level. Install basket below into track, very simple. The shelf fits but extremely tight!

Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.