Parts That Fix KitchenAid Refrigerator KRFF507ESS00 Light not working
Light not working is a commonly reported symptom for the KRFF507ESS00 KitchenAid Refrigerator, and we have put together a full guide
... Read more
on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your KRFF507ESS00 KitchenAid Refrigerator that will fix Light not working.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Read less
Light not working is a commonly reported symptom for the KRFF507ESS00 KitchenAid Refrigerator, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your KRFF507ESS00 KitchenAid Refrigerator that will fix Light not working.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Fixes Symptom 61% of time
Door switch turns the light off when you close the door.
$
29.37
In Stock
PartSelect Number PS12728638
Manufacturer Part Number W11384469
Replacing your Amana Refrigerator Refrigerator Door Switch
Customer Repair Stories
Light Switch broke
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only
... Read more
swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
Read less
-
James Richard from St. Cloud, MN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
47 of 73 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
-
Clint from Rayville, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
132 of 235 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 27% of time
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this part is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.
$
29.37
In Stock
PartSelect Number PS12731166
Manufacturer Part Number W11396033
Replacing your Whirlpool Refrigerator Door Switch
Customer Repair Stories
broken light switch
followed the instructions provided and that's it!
-
Richard from West Warwick, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
while closing the door, the light switch fouled, resulting in the switch breaking
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
-
Kevin from Beckley, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
63 of 109 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 10% of time
The LED light attaches inside the cabinet and illuminates the inside of the refrigerator or freezer
$
162.80
In Stock
PartSelect Number PS17216452
Manufacturer Part Number W11683242
Customer Repair Stories
Light out inside fridg.
Put painters tape next to light, so I wouldn't scratch surface. Worked edge of light down and out of hole with small screwdriver. Chechen wireing , light might work ? Unplugged light assembly . Plugged in new light , and reinserted light into opening . Removed tape ,, done. You can use putty knife in place of screwdriver. Be patient. Go
... Read more
ogle helps also.
Read less
-
William from N MYRTLE BCH, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
10 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LED behind upper compartment of freezer failed
The hard part was getting the OLD fixture out. They tell you to protect the surface around it with tape, but try sticking tape to a freezing cold surface with water condensing on it! And it's so firmly snapped in place that it takes a putty knife and screw driver to push the prongs back to get it loose. Finally, the fixture is on the ceil
... Read more
ing behind the icemaker so very awkward working conditions, plus and you can't see well because ALL of the lights are out (remember, they're in series). To see I had to prop my phone up at just the right angle to shine its little light on the area.
But getting it in was literally a snap. Just snap the couplings together, carefully push the wires into the empty space and slide the rear prongs in, then snap the front ones in simply by pushing the whole fixture firmly. Then pat yourself on the back!
But getting it in was literally a snap. Just snap the couplings together, carefully push the wires into the empty space and slide the rear prongs in, then snap the front ones in simply by pushing the whole fixture firmly. Then pat yourself on the back!
Read less
-
Matthew from ALTOONA, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 1% of time
Enhance the functionality of your Whirlpool appliance with this white LED module service kit. Designed impeccably for practical usability, this kit contains twelve improved, high-quality LEDs. These are effective replacements for all the LED light assemblies in your appliance, ensuring consistency in performance. Incorporating splice connectors, this kit facilitates swift and straightforward installations. This service kit represents genuine OEM quality, fitting seamlessly with select models of Whirlpool. Remember, for optimal appliance maintenance, always verify the requisite part's compatibility with your particular model.
$
128.59
In Stock
PartSelect Number PS17216451
Manufacturer Part Number W11683241
Customer Repair Stories
Light burned out
Remove the top two drawers, with a small screwdriver pop out module, unplug, plug in new module, press back into place, put drawers back, DONE! 5 minutes easy peasy ??
-
Neala from Tubac, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 1% of time
$
46.95
In Stock
PartSelect Number PS12584642
Manufacturer Part Number W11290115
Customer Repair Stories
The ice maker not producing ice
This model has a emitter sercuit board with a small pen lite that shines across ice Ben when low on ice a beam off light shines across ice Ben to send a signal to produce ice , If bulb is blown no ice,Very easy to fix , unplug wire,remove three screws and install new emitter board,A very nice Lady , Michell helped me with order, She was
... Read more
very prof. And nice , The ice maker is now working great, What a great company, And very nice people, Gk
Read less
-
George from Wayne, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!