KGCV KitchenAid Cooktop - Overview
Models starting with KGCV
Click on the best match to narrow your results.
- KGCV465MMT00 KitchenAid Cooktop
- KGCV465MMT02 KitchenAid Cooktop
- KGCV465MMT03 KitchenAid Cooktop
- KGCV465MSS00 KitchenAid Cooktop
- KGCV465MSS02 KitchenAid Cooktop
- KGCV465MSS03 KitchenAid Cooktop
- KGCV566MMT00 KitchenAid Cooktop
- KGCV566MMT01 KitchenAid Cooktop
- KGCV566MMT02 KitchenAid Cooktop
- KGCV566MSS00 KitchenAid Cooktop
- KGCV566MSS01 KitchenAid Cooktop
- KGCV566MSS02 KitchenAid Cooktop
- KGCV566RMT00 KitchenAid Cooktop
- KGCV566RMT01 KitchenAid Cooktop
- KGCV566RSS00 KitchenAid Cooktop
- KGCV566RSS01 KitchenAid Cooktop
Keep searches simple, eg. "belt" or "pump".
Range Torx Screw
PartSelect #: PS11741257
Manufacturer #: WP3368921
7-18 x 3/4-Inch - sold individually.
$6.95
In Stock
Refrigerator Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.95
In Stock
Range Knob Skirt (Black)
PartSelect #: PS11731279
Manufacturer #: W10854242
The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. This product is approx...
$10.45
In Stock
Range Knob Skirt
PartSelect #: PS11740833
Manufacturer #: WP3180081
This white knob skirt is located between the glass top and the control knobs of your stove top. The skirt has an outside diameter of approximately 2 inches. The most common reasons to replace the time...
$9.95
In Stock
Burner Cap
PartSelect #: PS11745641
Manufacturer #: WP8284669
Burner Cap - 6000 BTU
Sold individually.
$54.00
In Stock
Range Screw
PartSelect #: PS11742550
Manufacturer #: WP4449809
Follow appropriate safety practices when installing your range screw. Sold individually.
$8.37
In Stock
Range Natural Gas To Liquid Propane Conversion Kit
PartSelect #: PS11740944
Manufacturer #: WP3192741
This kit allows you to convert your appliance from natural gas to liquid propane.
$36.95
In Stock
Refrigerator Screw
PartSelect #: PS11741602
Manufacturer #: WP3400806
This screw is sold individually.
$7.95
In Stock
Range Burner Head 16k
PartSelect #: PS11754347
Manufacturer #: WPW10406878
This part distributes flame evenly to your cookware.
$50.36
In Stock
Range Igniter Switches w/Harness
PartSelect #: PS11742674
Manufacturer #: WP4456901
This part includes 5 ignition switches and the wire harness. You can not purchase these separately.
$106.90
In Stock
Stainless Steel Cleaner
PartSelect #: PS2360188
Manufacturer #: 31462A
Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.
No Longer Available
Common Symptoms of models starting with KGCV
[Viewing 4 of 4]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I had a faulty wiring on the igniter switches.
replaced the set of igniter switches I order from Partselect .com.
Parts Used:
-
Raymundo from Cerritos, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob on range top did not work.
Since removing the burner valve would disable the cooktop, I ordered the valve first. Unfortunately the valve could not be removed because the screw that hold it in place was frozen to the valve and manifold. I finally had to cut the screw off with a hacksaw. Since the screw is a special screw, substitutions did not work, so I had to o
... Read more
rder the screw and pay shipping a second time. These screws should be included with the valve. Anyway, the hacksaw did some slight damage to the manifold so that the screw did not seal off properly. I had to use a Dremel tool to smooth the surface and then use fiberglass to coat the surface to seal any scratches or potential leaks. I screwed the screw in after applying the fiberglass resin to the manifold surface while the resin was still pliable. This seemed to seal the manifold off so that there is no leak, but it does make me nervous. Because of having to reorder for the additional part, the range top took almost a week to repair and could not be used during that time all because the screw was not included with the burner valve. Also a screw with a larger head would have allowed a larger wrench to be used and the screw could have been removed easily. The screw head was so small that it rounded off from the wrench making it more difficult to remove.
Read less
Parts Used:
-
James from Hurst, TX
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Head burner had something spilled on it which stained it and left a large dark brown spot
Simply remove two screws take old one off and line up and put new one on and replace the two screws. Couldn't have been easier.
Parts Used:
-
Donald from Hudsonville, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!