Parts That Fix KitchenAid Refrigerator KBFS22EWMS7 Freezer not defrosting
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.
Introducing the Whirlpool Defrost Heater, an original OEM component designed specifically to enhance the performance of select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. The core function of this heater is to effectively melt the frost accumulating on the evaporator fins during the appliance's automatic defrost cycle. This process ensures the efficiency of your refrigerator, maintaining ideal conditions for food preservation. Keep in mind, it's advisable to unplug the refrigerator and store perishable food safely when installing this part. For your safety, wearing work gloves during installation can help protect your hands. Prior to ordering, please ensure this part number is correct for your model, as parts may seem similar but may differ in size and shape.
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor in your appliance to easily cycle on and off. This capacitor mounts directly onto the compressor starting relay. If the capacitor is faulty the compressor may get unusually hot and draw excessive amperage. It the compressor overheats, it may fail to run until it cools down again. The compressor may also get noisy from overheating. If this part is totally electrically open, it is defective (often due to overheating) and needs to be replaced. The part measures 1 inch by 1-1/2 inches, and is constructed of plastic with two metal wire terminals. This item includes 1 capacitor, sold individually. This part comes in black.
Discover the perfect solution for maintaining the right balance of temperature in your refrigerator with the Whirlpool THERMISTOR Refrigerator/freezer thermistor kit. A genuine OEM part, this thermistor kit is specially designed for compatibility with select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef fridge models. This kit does require a bit of DIY, as instructions are not included and can be obtained from Servicematters.com. The kit boasts a temperature sensor and 2 splice connectors that work in harmony to sense the temperature inside your fridge, sending this crucial information to the electronic control. For maximum personal safety, be sure to unplug your refrigerator and wear work gloves before the installment of this part. This Thermistor Assembly offers a prime solution to your appliance repair needs, keeping your Whirlpool refrigerator performing optimally.