All Installation Instructions for Samsung Microwave Oven Combo JVM-1750STC01

Buzzing noise, no heating of food

Removed control panel, discharged HV capacitor. Removed old diode, tested to confirm failure. Replaced part. Other than the removal of the panel swapping the part was almost as easy as replacing a light bulb.

Parts Used:

Microwave High Voltage Diode

Ted from Hudson, NH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

14 of 23 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Appears to work, but food not heated

The high voltage tired was shorted. I replaced it with a new one, but that did not solve the problem.

You can test the high voltage tired with a voltmeter and a 9 V battery. Search Search for it on YouTube.

You can also test the high voltage capacitor, the high-voltage transformer, and the magnetron with a multi meter. Search for the procedures on YouTube.

I tested all these high-voltage components with a low-voltage multi meter, and they all checked out OK (after replacing the diode). However the microwave still did not heat food.

When working on a microwave it is important to unplug it and also discharge the high voltage capacitor. The capacitor has a 10 megaohm resister to automatically discharge itself, but it may have failed – – so discharge it manually.

In the end I ordered a new microwave.

Parts Used:

Microwave High Voltage Diode

Joel from CAMBRIDGE, MA
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours

19 of 40 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Glass covering cook top lamp was broken

By removing one phillips headed screw, a metal frame pivoted down for easy replacement of glass plate.

Parts Used:

Microwave Cook Top Lamp Glass

ron from AKRON, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Microwave stopped working - would not heat up

I removed the outer cover and exposed the inner workings. I watched a video on partselect.com to show how to remove and replace the Diode. I followed the instructions and it was very easy to replace.

Unfortunately, the diode was only part of the issue. I ended up replacing the High Voltage capacitor and Magnetron also. Those were a little more complicated but still easy to do.

Now the Microwave works just like new! Cost me less than $100 for all parts.

Parts Used:

Microwave High Voltage Diode

louis from PARRISH, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers

7 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the coupler that turns the plate was fried

The part should have just been pulled up and out, mine was broke off so I had to drop the bottom tray and push the remaining old coupler up and out. I dropped the new part in and reinstalled the bottom tray. It was also a good time to clean the tray

Parts Used:

Coupler

CHRIS from KANKAKEE, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Microwave would keep running when door was open

Searched for a YouTube video that included “replace Samsung microwave body latch” (whatever part name). There are plenty of easy how-tos.

Parts Used:

Body Latch Assembly

Todd from GOSHEN, IN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

filter on microwave

easy to install

Parts Used:

Microwave Air Filter

kenny from Blytheville, AR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

WHEN I CLOSED DOOR IT WOULD HUMM

REPLACED DOOR SWITCH ASSEMLY

Parts Used:

Body Latch Assembly

ROBERT from GLEN BURNIE, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

VERY dirty- grease soaked- filters from under the above the stove microwave.

Pulled the filters down, measured and went on line- done. was fast to find the part and easy to order...

Parts Used:

Microwave Air Filter

Suzanne from LONG BEACH, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken carousel plate

Placed new plate in oven.

Parts Used:

Tray

Peggy from RENO, NV
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Glass broke

The tray was exactly what I needed. The price was excellent!

Parts Used:

Tray

Frances from CRESCENT CITY, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Microwave would trip ac breaker

It was a over the range microwave It had to be removed off the wall. Once down I removed the bottom plate and then removed the touch control panel. Per the instructions in the user manual tested the transformer it was ok. Next tested the capacitor it tested bad and also the diode tested bad. The parts were ordered from you. The parts installed easily. Reassembled the microwave and tested. Unit no longed tripped the AC breaker and worked heating some water. Installed the unit back above the range.

Parts Used:

Microwave High Voltage Diode