JNM3184DP9BB General Electric Microwave - Overview
Sections of the JNM3184DP9BB
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Microwave Stirrer Fan Cover
PartSelect #: PS1480811
Manufacturer #: WB06X10712
The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches i...
$37.95
In Stock
Microwave Light Bulb
PartSelect #: PS1481517
Manufacturer #: WB36X10328
Sold individually. Appliance may take 2.
$28.95
In Stock
Microwave Exhaust Adapter
PartSelect #: PS12709817
Manufacturer #: WB02X32715
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs air...
$15.95
In Stock
CHARCOAL FILTER
PartSelect #: PS16216937
Manufacturer #: WB02X35687
This charcoal filter is a genuine OEM replacement part that is compatible with various models of microwave. It has a length of approximately 8 inches by 5 inches. The filter is designed to absorb odor...
$20.47
In Stock
Cable Assembly
PartSelect #: PS16219547
Manufacturer #: WB27X35382
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
$16.95
In Stock
Mounting Plate Assembly
PartSelect #: PS16216996
Manufacturer #: WB56X35363
This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed t...
$26.95
In Stock
Monitor Interlock Switch
PartSelect #: PS11766871
Manufacturer #: WB24X25397
This is the replacement monitor switch for your microwave. It is black in color and measures approximately 1 inch by ¾ of an inch. This switch monitors the door latch position of your microwave and co...
$36.95
In Stock
Microwave Plastic Rivet
PartSelect #: PS222397
Manufacturer #: WB01X10055
This part is the replacement plastic rivet, or stirrer fan cover clip for your microwave. It is made of white plastic and is approximately ¼ inch in diameter, and ½ inch long. The plastic rivet holds ...
$13.95
On Order
GREASE FILTER
PartSelect #: PS12749195
Manufacturer #: WB02X35491
This grease filter is a genuine OEM replacement part that is compatible with various models of microwave. It has dimensions of 7.5 inches by 5 inches and it is made of durable aluminum mesh material. ...
$17.95
In Stock
Microwave Vent Grille
PartSelect #: PS11774030
Manufacturer #: WB34X25406
The Vent grille covers components inside the microwave while allowing airflow through the slats.
$106.51
In Stock
Fan Blade
PartSelect #: PS1480806
Manufacturer #: WB06X10706
This fan blade, also known as a stirrer blade, is a genuine OEM replacement part for your microwave. This is a fairly easy repair. To complete it, you will need a screwdriver to disassemble the fan as...
$22.95
On Order
Questions And Answers for JNM3184DP9BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JNM3184DP9BB
[Viewing 3 of 3]No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave made loud buzz noise and did not heat
I followed the generic trouble shooting directions on the web site. It suggested either diode, capacitor and/or magnetron. I test each. All tested OK except diode. It was supposed to measure open in one direction and appox 200k ohms in the other direction. My diode measured open in both directions (tried multiple times, multiple sett
... Read more
ings). I replaced the diode. The order process was great and it shipped immediately. I knew I was in trouble when I measured the new diode and it too was open in both directions. It was easy to install but unfortunately no joy - did not solve the problem. At this point it is likely cheaper just to buy a new one
Read less
Parts Used:
-
Gregg from Santa Ana, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
41 of 77 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cover stirrer fan was burned and sparking in three part even the plastic rivet
just in 1 2 3 step easy way. First unplug the power cord,use a small flat-head screwdriver to pull out the plastic rivet pin,rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then r
... Read more
eplace the mounting plastic rivet pin;with the repair completed, plug the power cord back in and your microwave oven should be ready for use again. : )
Read less
Parts Used:
-
Steven from UTICA, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I needed to acquire and install a mounting plate for an over the range microwave
I attached the mounting plate to the wall as directed in the installation instructions which I had downloaded from GE. This procedure took 45 minutes to complete. I was then able to mount the microwave.
Parts Used:
-
Roy from Lakewood, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
9 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!