Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This chrome OEM control knob measures 1 1/2" in diameter. It easily attaches onto the D-shaped shaft in order to allow controls to be used. Refer to your model number and user manual to ensure this pa...
This stainless burner knob is used in ranges and ovens. The knob allows you to adjust the heat of the surface burner on your range. This knob accepts a D-shaped shaft. If your touchpad does not respon...
This is a burner electrode for your oven, range, or stove. This part has a male spade. It helps your burner ignite by creating a spark, producing a flame, and lighting the surface burner. If your burn...
This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
January 22, 2020
Any suggestions on recovering igniter wire fallen back into the unit?No access door underneath and do not see how to pull out entire burner.
For model number JGD8430ADS
Hello and thank you for writing.
To open it up, after unplugging the cooktop, remove the metal tape connecting the external vent shaft to the blower. Then lift the entire cooktop out up out of the countertop so you can access the screws on the sides of the cooktop. Removed the 2 screws in the vent area on top (1 black screw on each side). And that releases the cooktop glass from the metal box that holds the burners. That should give you access to the wires. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chuck
February 21, 2024
Can I replace the igniter switch WP74010857 without lifting the entire cook top. If so, HOW? If NOT, what is the procedure?
THANKS
For model number JGD8430ADS
Hi Chuck,
Thank you for your question. Here is some information on installing wire harness with igniter switches that may help with your repair. Before installing any part onto your stove, you will need to unplug it from the electrical outlet and turn off the gas. First, remove the burner grates, heads and caps from the top of the stove. Then unthread the screws securing the burners and then remove them. Then remove the screws securing the main top panel to the surface burner igniters below it. Then remove the control knobs. Next, open the oven door and locate the screws at the bottom of the control panel. Using a screwdriver, remove the screws securing the front panel and remove it. Then use a screwdriver to remove the 2 black screws securing the main top panel. Then slightly push down on all the burners and slide the main top forward to lift it off the range. Next, remove the rear access panel by removing the screws securing it to the back of the oven. Then trace the black wire from the igniter switches to the back terminal and disconnect it. Using the flat head screwdriver, remove the red wire from the spark module terminal. Once you have done this, you may remove all the switches from the gas valve shafts. Then thread the black and red wires connected from the new switches under the manifold and place the igniter switches on the burner shafts. Push them in to lock them on the valves. Then connect the red wire to the spark module terminal and thread the black wire through the opening in the back panel and connect it to the terminal. Reinstall the rear access panel and place the main top back on and slide it back to lock it in place. Secure it with the screws. Then reinstall the manifold panel making sure to slide the 2 tabs into the slots of the main top and secure it with the screws. Close the oven door and reinstall the knobs. Then match the holes and secure the burner igniters with the screws. Next, install the burners and secure them with the screws. Place the burner caps and grates back on the stove. Plug the stove back in and turn on the gas. Your oven should now work for you. We hope this helps!
Was this helpful?
Thank you for voting!
Kenneth
March 4, 2024
Hi looking for the caps/hats
For model number JGD8430ADS
Hello Kenneth, thank you for getting in touch. The small burner cap for your model is part number PS11740923, medium burner cap is part number PS11744211, and the right front burner cap is part number PS11749138. Glad to be of assistance!
I simply remove the broken knob just like I do when cleaning. To place the new knob, I matched the flat part of knob opening with the flat part of the shaft, returning to off position.