Parts That Fix Jenn-Air Refrigerator JFC2290VEP8 Fridge too warm
This is an evaporator fan motor, it is 115 volts and 60 hertz and it is for your refrigerator/freezer. You will need to replace this part if your appliance is too warm or getting noisy. This evaporator fan motor is located in the back of the freezer. This part circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated throughout your appliance. To replace this part you will need a 1/4-inch nut driver and a pair of needle nose pliers.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.
This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan blade. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan. This model is all white in color, and is roughly 4 inches long, 3 inches wide, and 3.5 inches thick.
The compressor run capacitor helps keep the motor running smoothly in refrigerators. It works with various models and is a genuine replacement part. Always unplug the refrigerator before installing the capacitor, and check the part number for compatibility with your model.
This air damper control assembly is for refrigerators. The air damper control assembly controls the cold airflow from the freezer compartment into the refrigerator compartment. Unplug the refrigerator before installing this part.
Discover the perfect solution for maintaining the right balance of temperature in your refrigerator with the Whirlpool THERMISTOR Refrigerator/freezer thermistor kit. A genuine OEM part, this thermistor kit is specially designed for compatibility with select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef fridge models. This kit does require a bit of DIY, as instructions are not included and can be obtained from Servicematters.com. The kit boasts a temperature sensor and 2 splice connectors that work in harmony to sense the temperature inside your fridge, sending this crucial information to the electronic control. For maximum personal safety, be sure to unplug your refrigerator and wear work gloves before the installment of this part. This Thermistor Assembly offers a prime solution to your appliance repair needs, keeping your Whirlpool refrigerator performing optimally.
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.