Parts That Fix Inglis Washer ITW4300XQ0 Cycle Not Advancing
Cycle Not Advancing is a commonly reported symptom for the ITW4300XQ0 Inglis Washer, and we have put together a full guide
... Read more
on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your ITW4300XQ0 Inglis Washer that will fix Cycle Not Advancing.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Read less
Cycle Not Advancing is a commonly reported symptom for the ITW4300XQ0 Inglis Washer, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your ITW4300XQ0 Inglis Washer that will fix Cycle Not Advancing.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Fixes Symptom 99% of time
This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. You will need a 5/16-inch nut driver for this repair. The package will contain one lid switch. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch.
$
34.63
In Stock
PartSelect Number PS11745957
Manufacturer Part Number WP8318084