IBMS1455VS0 Whirlpool Microwave - Overview
Sections of the IBMS1455VS0
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Microwave Turntable Tray
PartSelect #: PS12728515
Manufacturer #: W11373838
This genuine OEM microwave turntable tray is a circular plate made of glass and has a diameter of approximately 16 inches. It rotates food in your microwave oven, so that your food cooks evenly. It is...
$65.61
In Stock
Microwave Halogen Bulb
PartSelect #: PS11754756
Manufacturer #: WPW10440740
This is a small light bulb.
$27.24
In Stock
Microwave Door Switch 250v
PartSelect #: PS2338920
Manufacturer #: W10211972
This door switch (Primary and Secondary) keeps the microwave from running when the door is open.
NOTE: Two switches required. Sold individually.
$42.95
In Stock
Holder Button
PartSelect #: PS12114309
Manufacturer #: W11116990
This is the button holder for #6 on the diagram.
$25.14
In Stock
Microwave Turn Ring
PartSelect #: PS12074822
Manufacturer #: W11110134
This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.
$47.95
In Stock
Microwave Turn Shaft
PartSelect #: PS12578368
Manufacturer #: W11223840
This part accepts a D-shaped shaft.
$23.95
In Stock
Cover
PartSelect #: PS11769950
Manufacturer #: W10915651
Introducing the Whirlpool Microwave Inlet Cover, a genuine OEM part specifically designed for certain Whirlpool brand models. This vital replacement part serves to shield your microwave's waveguide ch...
$49.95
In Stock
Turntable Motor
PartSelect #: PS11769794
Manufacturer #: W10911403
Introducing the Whirlpool Turntable Motor, an essential and authentic OEM part designed to maintain the performance of your microwave oven. This turntable motor is skillfully engineered to rotate the ...
$69.25
In Stock
Questions And Answers for IBMS1455VS0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the IBMS1455VS0
[Viewing 5 of 5]Won’t turn on
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
No heat
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave glass turntable when pop
After popping the last few kernals of popcorn, we hear a different kind of pop sound come from our microwave oven. When we looking inside, we found that the glass turntable had broken unevenly in half. Although we didn't understand why it had happned, we did know we'd be without the use of the microwave without a new one. After less th
... Read more
an 10 minutes surfing online, I had found the correct part on PartSelect.com and had arranged to have it shipped to me by speedy delivery. Once it arrived, I just popped the new turntable into the microwave and used the box to dispose of the broken one. It could not have been easier and it saved me the cost of a service call and likely further delay.
Read less
Parts Used:
-
Liza from Monterey, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
35 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lamp replacement
1)Power off 2) Remove frame covering front timer display - screw on the bottom 3) unscrew time display - 4 screws 4) unsnap lamp spring clip 5)replace lamp
Parts Used:
-
Peter D. from Smithtown, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
18 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The display kept asking me to close the door, even though the door was closed. The interior light stayed on.
I used a Google search to show how to access the area behind the front panel. There was a folded paper copy with a schematic and wiring diagram in that space.Then I used a multi-meter to determine which of the THREE micro-switches was causing the problem. I called your help line and ordered a replacement switch. The switch was delayed
... Read more
in transit so your agent credited me with the cost of shipping.
When the part arrived, it had three terminals instead of two as shown in the on-line picture but that did not cause any difficulty in using it. It took about 20 minutes to remove and replace the old switch.
All seems to be working well now.
Finding which of the THREE switches was the problem was the most difficult part of the repair. All three "clicked" but the defective one did not click as easily. It needed to be depressed more than the door latch can would provide. Old age?
When the part arrived, it had three terminals instead of two as shown in the on-line picture but that did not cause any difficulty in using it. It took about 20 minutes to remove and replace the old switch.
All seems to be working well now.
Finding which of the THREE switches was the problem was the most difficult part of the repair. All three "clicked" but the defective one did not click as easily. It needed to be depressed more than the door latch can would provide. Old age?
Read less
Parts Used:
-
E G from SILVERDALE, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
10 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!