Parts That Fix Hotpoint Dryer HTX21PASK0WW Won’t Start

Restore reliable operation to your GE dryer with this genuine OEM push-to-start switch, designed specifically for use with a range of GE dryer models. This switch activates the dryer when you press and release the button, making it an essential component for proper startup. Common signs that this part may need replacement include the dryer failing to start or starting unexpectedly without pressing the switch. Replacing the switch is a straightforward repair and requires only a Phillips screwdriver and a flathead screwdriver. Before beginning the installation, always disconnect the power to ensure safety. Once the power is off, remove the control panel screws, disconnect the old switch, and install the new one in its place. This part is sold individually and is a reliable solution for restoring your dryer's functionality with minimal effort.

This is the door switch for your dryer. Door switches are used to communicate with the control board when the door is fully closed, so the drying cycle can safely begin, and if it is opened so it can stop. If this door switch is damaged or bad from extended use or excessive force when closing, it will cause your dryer not to start, and it will need to be replaced. This door switch will require a few tools, such as a screwdriver, wrench, and pliers to replace, and some slight disassembly of your dryer. This door switch is an OEM part and is sold individually.

This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley, allowing all the parts to work together, spinning the drum as the motor rotates. If the drum will not turn when the dryer is turned on the belt is likely broken. It is common for belts to stretch or become brittle over time, which is what leads to the breakage. If broken, it should be replaced; the drum simply cannot spin without this belt. Refer to your model number and user manual to check if this part is right for you. Ensure you use work gloves to protect your hands from sharp internal parts during this repair. Please note: When comparing the length of your old belt to the length of the belt as stated here, remember that a small amount of stretching and contortion may occur with belts over time for a range of different reasons. Unless your belt is drastically different in length, this belt is what you are looking for despite any small inaccuracies. You will need to remove power to your appliance, remove the main panel, and access the motor drive to slip your new belt back into place.

Introducing the GE BUTTON START Assembly, a vital component for maintaining your dryer's optimal performance. This power and start button is specifically engineered to supply power to your dryer's controls and kickstart the drying process with a simple push. Before installing, remember to disconnect the appliance from any power source. To ensure your safety, it is recommended to wear work gloves during the installation. Trust the dependability of GE to bring efficiency to your laundry routine with this start button assembly. Be confident in your choice for quality, durability, and seamless operation.

This genuine OEM control knob is used in dryers. It is mounted on the front panel of the appliance. It is white in color and is made from high quality plastic. It allows users to select various drying cycles, such as regular, delicate, or timed drying, as well as adjust temperature settings and other options. A faulty knob will result in difficulties such the knob not turning smoothly or accurately selecting the desired setting, or the dryer not responding to changes in the selected settings. Additionally, if the knob feels loose or wobbly, it may indicate that the knob is damaged or worn out. You will need to be replace the knob to restore proper functionality to the dryer.