HG700A-AS00 (KRB700B) Kawasaki Leaf Blower / Vacuum - Overview

Trimmer Fuel Tank Grommet

★★★★★

★★★★★

(2)

The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or da... Add to cart

Trimmer Tank Cap Assembly

★★★★★

★★★★★

(2)

The Fuel Cap Assembly, is a black, plastic cap that keeps fuel inside the tank, and debris out. If broken, fuel will begin leaking out and it must be replaced. Installation is rated as "Easy", the par... Add to cart

Trimmer Priming Pump

★★★★★

★★★★★

(1)

The Primer, or priming pump, is a plastic part that attaches to the carburetor. It's rated as "Easy" to install by most of our customers. This part is used to pump fuel from the fuel tank to the carbu... Add to cart

Trimmer Fuel Filter Clamp The fuel filter clamp, is a silver, individually sold, metal part, used to secure the fuel line to the fuel filter. It attaches to the fuel filter and if broken, typically due to fatigue or damage, it... Add to cart

Trimmer Breather

★★★★★

★★★★★

(1)

The Breather allows air to enter the tank, so no vacuum is created as the fuel level drops, which would prevent the flow of fuel to the carburetor.It seals in the gas emissions and fuel at the same ti... Add to cart

Trimmer Tank & Breather Cap Kit The Fuel Tank Cap and Breather is an assembly made up of black plastic parts. You'll know if you need a new one if fuel is leaking, and this appears to be the source. This can happen due to normal we... Add to cart

Leaf Blower Band Assembly Add to cart

Leaf Blower Stopper A Stopper is a black plastic part used to attach the pad to the frame. Refer to your make, model, and diagrams to ensure this is the right part for you. It is sold individually, is rated as "easy to i... Add to cart

Trimmer Diaphragm Add to cart

Engine Fuel Tank Add to cart

Trimmer Gasket Add to cart

Leaf Blower Frame Pad The Frame Pad is a 10 x 11.5-inch part used to reduce vibrations from the motor. A damaged Frame Pad won't reduce vibrations very well, and should be replaced. The pad is rated as "Easy" to install an... Add to cart