Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishe...
$46.95
In Stock
Order within the next 1 hr and 20 mins and your part ships today!
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is causing the door to...
$20.95
In Stock
Order within the next 1 hr and 20 mins and your part ships today!
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$33.95
In Stock
Order within the next 1 hr and 20 mins and your part ships today!
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$13.95
In Stock
Order within the next 1 hr and 20 mins and your part ships today!
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
$13.95
In Stock
Order within the next 1 hr and 20 mins and your part ships today!
This is a replacement lower wash arm assembly for your dishwasher. The lower spray arm is mounted to the bottom of your dishwasher tub and will rotate and spray water during the wash cycle. The spray ...
$157.65
In Stock
Order within the next 1 hr and 20 mins and your part ships today!
This part fits just under the fine filter assembly and supports the lower spray arm.
$73.67
In Stock
Order within the next 1 hr and 20 mins and your part ships today!
Questions And Answers for HDA2100H50BB
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
August 6, 2021
I have a dishwasher that has power to it will not come on what would i check to see what the problem is
For model number HDA2100H50BB
Hello Tom, Thank you for your great question. If your dishwasher won't start, the problem could be the door latch or door latch switches. The Door Interlock Switch is PartSelect Number PS1481922 and the Door Latch Kit is PartSelect Number PS259293. If your model comes with a RESET button, you can try that is not, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box. Thanks again for the great question.
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
The wheels came with a clip on part that clipped to the rack and the wheel snapped into that clip. I am a woman and it was easy for me to do. Thanks to Parts Select for being an easy to use and navigate site, for quick shipment and for good directions with the parts. Sincerely, Teresa from Alabama.
First off on this model, if one of the telescopic spray arm weld assembly comes out it is NOT repairable you have to replace the whole part. The assembly on my model number was simple you do NOT have to PRY anything out...(I broke the base spray arm trying to shove a screw driver into the Spray arm weld.(You could try this but chanc
... Read morees are the plastic will break and I recommend replacing both parts why not???.) There are two bolts on the sump protector basket that has to be removed first. They are 1/4 inch. Once that cover is free there is a bolt (also 1/4 inch) on the base spray arm it is easy to see but hard to get to I used a very thin open ended wrench 1/3 turn at a time till I could get the socket on it. Next there is a rubber gromet like thingy that just pulls loose remove it also. Next take the spanner wrench (I used one with a rubber belt) wrap around base spray arm and turn counter clockwise it just unscrews.
reassembly is simple but this is GE so I inspected the sump and found one medal impeller and one black screw at the bottom!!!!! The impeller is threaded and just screws onto the shaft (look at the diagrams on this web site to see placement.) Throw the screw away it does nothing except if left there jacks up the impeller I am guessing it fell out of some factory workers pocket. If after you put all the parts back in and the washer does not drain check your reassembly if you don't line the parts up just right the unit will not drain. Don't forget the rubber grommet (not sure what it does but it's easy to replace after all is assembled) also there is a metal washer that is inbetween the base spray arm and the spray arm weld put it back before you click those two parts together it protect the plastic from wearing it is a bearing!! If you found this site you are doing really good This site had all the diagrams I was looking for I love you guys you so rock!!! I wish the diagrams were bigger but they were adequate. GE 's site was no help and I doubt I will ever buy another one from them. Good luck just remember look at the parts diagrams before attempting the repair.
