GXM General Electric - Overview
Models starting with GXM
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Drain Hose Adapter Kit
PartSelect #: PS5135778
Manufacturer #: WS22X10065
Introducing the GE Drain Hose Adapter Kit, a necessity for your appliance repair needs. This high-quality part is renowned for its durability, precision-engineered to ensure long-lasting functionality...
$103.83
In Stock
Tube Clip
PartSelect #: PS311356
Manufacturer #: WS60X10008
Sold individually and used with water softeners.
$13.95
In Stock
Water Softener O-Ring Seal
PartSelect #: PS311060
Manufacturer #: WS03X10011
For use with external, stand-alone water filters.
$28.95
Special Order
MOTOR CAM GEAR ASSEMBLY
PartSelect #: PS12710505
Manufacturer #: WS26X21821
Introducing the GE Motor Cam Gear Assembly! This high-quality valve motor is specifically designed for GE water softeners. Its main function is to initiate the unit upon receiving commands from the un...
$115.38
Special Order
O-Ring Seal Kit
PartSelect #: PS311316
Manufacturer #: WS35X10001
Used in Water Filters.
$49.95
In Stock
Flow Plug - 3 gpm
PartSelect #: PS311222
Manufacturer #: WS22X10021
Used for Water Filters.
$36.95
Special Order
Water Softener Ferrule Nut
PartSelect #: PS311065
Manufacturer #: WS03X10017
For use with external, stand-alone water filters.
$22.95
In Stock
Transformer with Power Cord
PartSelect #: PS968107
Manufacturer #: WS26X10013
Introducing the genuine OEM Transformer with Power Cord by GE. This essential tool serves as a crucial connection between your water softener and the electrical outlet, promoting optimal product funct...
$114.61
Special Order
Common Symptoms of models starting with GXM
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Using RustOut in the brine tank for years destroyed the seals and salt valve of the brine assembly. Easier to replace entire brine valve assembly.
Remove the top back lid/unlatch 2 clips. Unscrew the small brine tube nut (white) from left side of control unit. Cut the tube to remove nut from old tube with utility knife. Keep nut for use on new assembly. Not included. Remove brine well cover. Pull the tube out of the top and from behind resin tank and remove assembly from brine well
... Read more
. Discarded the old brine valve assembly. Removed the bit of old tube from the nut, w/ utility knife. Careful not to damage the old nut. Snake the new brine tube from front right side through the back of the resin tank to the old hole on the left. Follow the old path. Insert the new brine tube into the top section through the hole the old one came out of. Attached nut to new brine tube. Screw nut/new brine tube to the connector of control unit. Small fingers help. Adjust/slide the float assembly 6-8 inches inches above the valve, e.g. Styrofoam/Metal Weight slides up/down the white stalk. Re-inserted the brine assembly into the brine tank. Replace top. Manually regenerate to make sure new brine assembly is not leaking and filling the brine tank properly. Done.
Read less
Parts Used:
-
John from RICHMOND, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The unit was not measuring water as it went thru.had stuck turbin.
Very easy to put softener in bypass and release pressure by starting a regeneration cycle. Clips removed by hand with no force required. Separate bypass from softener. Removed old turbine and slid new turbine into unit. Reconnect bypass valve and install clips by hand. Return softener to service mode. Unit now shows gal / minute in screen
... Read more
.
Read less
Parts Used:
-
Dennis from LIBERTY, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
OLD iron connection adaptor caused leaking
I replaced old rusty iron adaptors with new bronze adaptors.
No more leaking and finished replacing new GE water softner.
Thank you for quick delivery of plastic connectors.
No more leaking and finished replacing new GE water softner.
Thank you for quick delivery of plastic connectors.
Parts Used:
-
Joong from otis, ME
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Wrench (Adjustable)
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!