GXI6536DXS2 Whirlpool Range Hood - Overview
Sections of the GXI6536DXS2
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".

Grease Filter
PartSelect #: PS2372036
Manufacturer #: W10169961A
Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.
$39.87
In Stock

Charcoal Filter (3 Pack)
PartSelect #: PS3502126
Manufacturer #: W10412939
This part includes 3 charcoal filters.
$54.83
In Stock

Light Bulb
PartSelect #: PS11756469
Manufacturer #: WPW10571723
This light bulb is compatible with different makes and models of microwaves, ranges and range vent hoods. This halogen light bulb is a genuine OEM part and is 120V and 40W. It is sold as an individual...
$22.01
In Stock

Plate
PartSelect #: PS12348533
Manufacturer #: W11178521
Introducing the Whirlpool NAMEPLATE, a genuine OEM part tailored to work with various Whirlpool models. Specifically designed for ranges, this nameplate prominently displays the prestigious Whirlpool ...
$47.95
In Stock

Light Bulb With Housing
PartSelect #: PS11756336
Manufacturer #: WPW10562734
Enhance your kitchen with this light bulb and housing assembly from Whirlpool. This genuine OEM part is designed to work seamlessly with specific models from Whirlpool, KitchenAid, Maytag, Jenn-Air, A...
$74.04
In Stock
Manuals & Care Guides for GXI6536DXS2
Click to downloadQuestions And Answers for GXI6536DXS2
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
March 30, 2025
I need instructions on how to replace the 2 light bulbs for this Hood Vent. Thank You !
For model number GXI6536DXS2
Hi Don,
Thank you for your question. To replace the light bulb, turn the range hood off and allow the bulbs to cool. Also turn the power off to the range hood. Wear cotton gloves when removing the bulbs. Use a flathead screwdriver to gently pry the light covers loose. Then remove the old bulbs and install the new ones. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old grease filters were coming apart due to two tiny lost screws which had popped out. Tried to replace them at ACE Hardware and found nothing that tiny! Therefore just ordered replacement grease fikterd.
The only poroblem I had was finding the Model number. I entered WWW….instead of WVW (my eyesight and error??.Receiving the new filters was prompt! THANK YOU!
Parts Used:
-
Anneliese from Sarasota, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Countertop Dishwasher - Non Whirlpool
Since I have All Whirlpool appliances in the home, the only one not a Whirlpool was a counter top dishwasher that looks exactly like it could be a Whirlpool and so not to be the odd unit out, I labeled it with with a Whirlpool logo nameplate on the face of the door. Now everything matches perfectly and all in the same exact color white t
... Read more
oo.
Just measured and marked where the plate was to be located, cleaned that part of the surface, peeled the backing and carefully placed the logo name plate in place and pressed it on. Voila. Done and looks original as well. Call me the big, deep fakearooski.
Just measured and marked where the plate was to be located, cleaned that part of the surface, peeled the backing and carefully placed the logo name plate in place and pressed it on. Voila. Done and looks original as well. Call me the big, deep fakearooski.
Read less
Parts Used:
-
Peter from PLEASANT PR, WI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!