GX5SHT Whirlpool Refrigerator - Overview
Models starting with GX5SHT
Click on the best match to narrow your results.
- GX5SHTXTB00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTB01 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTB11 Whirlpool Refrigerator (BOTTOM-MOUNT REFRIGERATOR)
- GX5SHTXTL01 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTL11 Whirlpool Refrigerator (BOTTOM-MOUNT REFRIGERATOR)
- GX5SHTXTQ00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTQ01 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTQ11 Whirlpool Refrigerator (BOTTOM-MOUNT REFRIGERATOR)
- GX5SHTXTS00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTS01 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTS11 Whirlpool Refrigerator (BOTTOM-MOUNT REFRIGERATOR)
- GX5SHTXTT00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTT01 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXTT11 Whirlpool Refrigerator (BOTTOM-MOUNT REFRIGERATOR)
- GX5SHTXVA00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXVA01 Whirlpool Refrigerator (Bottom freezer)
- GX5SHTXVB00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXVB01 Whirlpool Refrigerator (Bottom freezer)
- GX5SHTXVB02 Whirlpool Refrigerator (Bottom freezer)
- GX5SHTXVQ00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXVQ01 Whirlpool Refrigerator (Bottom freezer)
- GX5SHTXVY00 Whirlpool Refrigerator (Bottom freezer, Bottom-mount)
- GX5SHTXVY01 Whirlpool Refrigerator (Bottom freezer)
- GX5SHTXVY02 Whirlpool Refrigerator (Bottom freezer)
Keep searches simple, eg. "belt" or "pump".

Refrigerator Water Filter
PartSelect #: PS11722130
Manufacturer #: EDR4RXD1
This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it...
$75.79
In Stock

Refrigerator Pantry End Cap Kit
PartSelect #: PS11738134
Manufacturer #: W10874836
This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
$34.60
In Stock

Replacement Ice Maker
PartSelect #: PS2121513
Manufacturer #: D7824706Q
This ice maker (Ice Maker Assembly, Refrigerator Ice Maker) produces ice cubes that are ejected into the storage bucket. It is located in the freezer section of your appliance, mounted on the freezer ...
$89.24
In Stock

Refrigerator Center Rail
PartSelect #: PS11752912
Manufacturer #: WPW10326469
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
$23.95
In Stock

Refrigerator Pantry Drawer Lid
PartSelect #: PS11723190
Manufacturer #: W10827015
This pantry drawer lid is also known as a pantry drawer door or pantry drawer cover. This is a genuine OEM part, and is sold individually. This part helps keep everything inside the drawer. It acts as...
$116.87
In Stock

Ice Maker Control Assembly
PartSelect #: PS2341896
Manufacturer #: W10190935
The “Icemaker Control Assembly” (Module & Motor Assembly, Ice Maker Control Module, Icemaker Module, Refrigerator Ice Maker Module) is what controls the actions of your ice maker. The control turns th...
$66.84
In Stock

Refrigerator Door Switch
PartSelect #: PS12728638
Manufacturer #: W11384469
Door switch turns the light off when you close the door.
$29.37
In Stock

Refrigerator Capacitor
PartSelect #: PS11757023
Manufacturer #: WPW10662129
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
$42.95
In Stock

Door Switch
PartSelect #: PS12731166
Manufacturer #: W11396033
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$29.37
In Stock

Refrigerator Screw
PartSelect #: PS11742240
Manufacturer #: WP400021-1
Sold individually.
$11.95
In Stock

Refrigerator Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.95
In Stock

Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
In Stock
Common Symptoms of models starting with GX5SHT
[Viewing 25 of 25]Ice maker not making ice
Fixed by
these parts
these parts



Show All
Leaking
Fixed by
these parts
these parts



Show All
Fridge too warm
Fixed by
these parts
these parts



Show All
Door won’t open or close
Fixed by
these parts
these parts



Show All
Light not working
Fixed by
these parts
these parts



Show All
Will Not Start
Fixed by
these parts
these parts



Show All
Not dispensing water
Fixed by
these parts
these parts



Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts



Show All
Noisy
Fixed by
these parts
these parts



Show All
Freezer section too warm
Fixed by
these parts
these parts



Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts



Show All
Freezer not defrosting
Fixed by
these parts
these parts



Show All
Fridge too cold
Fixed by
these parts
these parts



Show All
Frost buildup
Fixed by
these parts
these parts


Show All
Clicking sound
Fixed by
these parts
these parts



Show All
Door Sweating
Fixed by
these parts
these parts



Show All
Too warm
Fixed by
these parts
these parts



Show All
Ice maker dispenses too little ice
Fixed by
these parts
these parts



Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts



Show All
Freezer too cold
Fixed by
these parts
these parts



Show All
Won’t start
Fixed by
these parts
these parts



Show All
Fridge runs too long
Fixed by
these parts
these parts


Show All
Little to no heat when baking
Fixed by
these parts
these parts

Show All
Element will not heat
Fixed by
these parts
these parts

Show All
Touchpad does not respond
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Parts Used:
-
Douglas from Byron, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
910 of 1036 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determin ... Read more ing what type of connection held the other two attachment points along the long edge of the icemaker. I did not have repair manual or useful drawing but looked @ PartsDirect pic of side brackets & used a small mirror to confirm that mine were also some sort of "snap in" attachment.
Remove icemaker unit by pushing upward and outward on the unit. I takes a good bit of pressure and will pop loose, but be careful not to break attachment bracket from freezer wall.
Scavenge shut off bar and wiring harness from old icemaker once you have it out & attach to new one before installing it back in freezer.
Again, you might find a mirror useful to align those pesky snap-in brackets with the new unit.
Since you probably kept your freezer running while waiting for the part, the plastic snap-ins will be cold and brittle. I warmed them up first by applying a dampened cloth heated in the microwave to make them a little more pliable.
A good push of the new unit towards the snap-ins along with some upward force will get it stable.
Reattach the metal screw in bracket & connect the wiring harness to rear plug... and don't forget to plug the whole thing back in.
It will take awhile for the first batch of cubes dump as the timer may need to cycle completely around to get to the fill cycle... be patient.
Dump the first couple of batches of cubes just to make sure you're free of any residue.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determin ... Read more ing what type of connection held the other two attachment points along the long edge of the icemaker. I did not have repair manual or useful drawing but looked @ PartsDirect pic of side brackets & used a small mirror to confirm that mine were also some sort of "snap in" attachment.
Remove icemaker unit by pushing upward and outward on the unit. I takes a good bit of pressure and will pop loose, but be careful not to break attachment bracket from freezer wall.
Scavenge shut off bar and wiring harness from old icemaker once you have it out & attach to new one before installing it back in freezer.
Again, you might find a mirror useful to align those pesky snap-in brackets with the new unit.
Since you probably kept your freezer running while waiting for the part, the plastic snap-ins will be cold and brittle. I warmed them up first by applying a dampened cloth heated in the microwave to make them a little more pliable.
A good push of the new unit towards the snap-ins along with some upward force will get it stable.
Reattach the metal screw in bracket & connect the wiring harness to rear plug... and don't forget to plug the whole thing back in.
It will take awhile for the first batch of cubes dump as the timer may need to cycle completely around to get to the fill cycle... be patient.
Dump the first couple of batches of cubes just to make sure you're free of any residue.
Read less
Parts Used:
-
Bernie from Diamond Bar, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
809 of 904 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ice
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Parts Used:
-
Daniel from Suwanee, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
565 of 685 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!