GTD65EBMJ0WS General Electric Dryer - Overview
Sections of the GTD65EBMJ0WS
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Lint Filter
PartSelect #: PS11763056
Manufacturer #: WE03X23881
This is a genuine OEM part that works for some models of GE, and Hotpoint models. This Lint Filter is used for Dryer.
$48.95
In Stock
Dryer Bearing Slide (2 Pack)
PartSelect #: PS17137207
Manufacturer #: WE03X37319
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
$15.95
In Stock
Dryer Bearing Slide (2 Pack)
PartSelect #: PS17626249
Manufacturer #: WE03X37320
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
$23.95
In Stock
Dryer Switch
PartSelect #: PS1481922
Manufacturer #: WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$33.95
In Stock
DOOR SWITCH
PartSelect #: PS12722948
Manufacturer #: WE04X28977
This is the door switch for your dryer. Door switches are used to communicate with the control board when the door is fully closed, so the drying cycle can safely begin, and if it is opened so it can ...
$17.95
In Stock
Dryer Foam Seal
PartSelect #: PS2577674
Manufacturer #: WE1M825
This is 39 inches long.
$14.95
In Stock
Door Hinge
PartSelect #: PS11763047
Manufacturer #: WE01X25317
Experience the seamless functionality of your dryer with the GE Door Hinge. This dryer component plays a crucial role in the operation of your machine, supporting the dryer door on its front panel. It...
$37.95
In Stock
Top Bearing Felt
PartSelect #: PS2355953
Manufacturer #: WE9M31
This felt attaches to the top bearing.
$14.95
In Stock
Dryer Inlet Control Thermostat
PartSelect #: PS1766014
Manufacturer #: WE4M398
This part is located on the housing for the heating element.
$46.95
In Stock
High Limit Thermostat - L315-65
PartSelect #: PS267900
Manufacturer #: WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
$72.70
In Stock
Dryer Shaft & Bracket Assembly
PartSelect #: PS2355941
Manufacturer #: WE3M33
This GE drum support shaft and bracket assembly provides solid support for the drum at the back wall of your dryer. The design ensures smooth rotation of the drum whilst it performs its drying functio...
$45.95
In Stock
Questions And Answers for GTD65EBMJ0WS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GTD65EBMJ0WS
[Viewing 10 of 10]Noisy
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Not Heating
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Door Sags
Fixed by
these parts
these parts
Show All
Too hot
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lint filter tore
-
Lisha|Lamb from SHELDON, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
35 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
interlock switch was bad. Prevents the dishwasher form running as it "thinks" the door is still open.
Opened door, removed screw holding down metal plate that presses against interlock switch when door is closed. Removed plastic cover thingy that is over interlock switches. Removed the interlock switch by pressing the plastic lock thingy away from switch. Pulled the wires off each end of the interlock switch. Removed new interlock switch
... Read more
from plastic bag and reversed above procedure. Done, shut door and the dishwasher works.
Read less
Parts Used:
-
Steven from EPHRATA, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
31 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken/ Tore Lint Filter
Opened dryer door and pulled out and Removed Broken old Lint Filter, inserted New Lint Filter into Lint Filter slot, then closed Dryer door.
Parts Used:
-
Cristina from WHITTIER, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
18 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!