GGNCV365W Thermador Cooktop - Overview
Sections of the GGNCV365W
[Viewing 22 of 22]
Keep searches simple, eg. "belt" or "pump".
NUT
PartSelect #: PS8698313
Manufacturer #: 00188978
This nut is designed for use with different makes and models of ranges and cooktops and is a genuine OEM part. This nut is 1mm thick and is 22-threads-per-inch, and is made of high-quality, durable st...
$23.41
In Stock
SWITCH
PartSelect #: PS8714254
Manufacturer #: 00428049
This OEM control panel switch, also known as a limit switch or limit sensor, is mounted within the control panel housing on ranges. It is a small component that is responsible for transferring power t...
No Longer Available
TUBE
PartSelect #: PS8698437
Manufacturer #: 00189321
This OEM-verified venturi tube, found in your range, blends gas and air to create the proper fuel-air mixture for combustion. It is alternatively known as a gas tube connector or surface burner tube. ...
$48.03
In Stock
Spark Module
PartSelect #: PS8737287
Manufacturer #: 00753257
This is a fixing kit for a gas range or cooktop, it is also known as a spark module. It is a six-point gas re-igniter with flame rectification. A spark module is used to create the spark that ignites ...
$212.99
In Stock
Cooktop Installation Bracket
PartSelect #: PS8698292
Manufacturer #: 00188954
This installation bracket is for cooktops. Installation bracket holds the cooktop in place to the surrounding countertop.
$34.50
In Stock
Range Surface Burner Cap
PartSelect #: PS8698606
Manufacturer #: 00189762
This surface burner cap is for ranges. Surface burner cap fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
$129.57
Special Order
Questions And Answers for GGNCV365W
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the lens did not fit It did not fit in the hole of the range top
I has to file the bottom edge on a slight angle so the lens would fit in the hole. Also I had to file the top edge cause it had little tabs and and also had to file the edge below the top of the lens then it would snap in so I have to say the woman I talked to said she guaranteed me it would fit and it didn't
Parts Used:
-
richard from HOPATCONG, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!