GFW550SSN1WW General Electric Washer - Overview
Sections of the GFW550SSN1WW
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".

Drain Pump and Filter
PartSelect #: PS16217203
Manufacturer #: WH11X29539
This drain pump and filter assembly is a genuine OEM replacement assembly that is designed for washing machines. It is responsible for removing water from the washing machine tub at the end of each wa...
$67.95
In Stock

DOOR LOCK
PartSelect #: PS12749276
Manufacturer #: WH01X29528
This genuine OEM door lock is a replacement part specially designed for front-load washing machines. It is a safety mechanism designed to prevent the door from being opened during the wash cycle. When...
$60.71
In Stock

Door Boot Gasket
PartSelect #: PS12743602
Manufacturer #: WH05X29521
This is a gasket seal for use in washing machines. This seal, also known as a gasket or boot, is used to seal the inner drum of the washing machine from the rest of the washer cabinet, and beyond. If ...
$122.95
In Stock

Inverter Board Flat Washer
PartSelect #: PS17063448
Manufacturer #: WH22X35837
$163.71
Special Order
Questions And Answers for GFW550SSN1WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Diane
March 15, 2023
I need to order the shipping bolts, spacers and whatever else is needed to ship my washer.
For model number GFW550SSN1WW
Hello Diane, thank you for contacting us. According to our research, the shipping bracket, part number PS16219909, the long shipping bolts, part number PS12743589, the short shipping bolt, part number PS12743588, and the shipping bolt hole cover, part number PS16217184, will be used to ship the washer. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Kevin
February 2, 2024
My machine has started to take 3 or 4 spin cycles to spin out the clothes. Is this a belt problem or some kind of sensor?
For model number GFW550SSN1WW
Hello Kevin, thank you for your inquiry. According to our research, we would recommend checking the belt for any damage and make sure that load is balanced. If the belt is fine and the load is balanced, then the issue is most probably with the drive motor, part number PS12749280. You may need to replace it to fix the issue. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Mike
March 15, 2024
Washer will not drain and spin cleaned the filter out and drain line is fine start the washing cycle will run until it is time to rinse and drain but will not desperately need help what else can I do.
For model number GFW550SSN1WW
Hi Mike, thank you for contacting us. Based on the description, the issue is with the drain pump and filter, part number PS16217203. We would recommend replacing the drain pump to fix the issue. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
Jerry
April 3, 2024
At first the door would not unlock, after getting it open I replaced the door lock and now the door wont lock so I cant start the cycle.
For model number GFW550SSN1WW
Hello Jerry, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the main control board, part number PS17139258, to solve the problem. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
Kevin
March 11, 2023
I get power to the board but not to the washer control what could that be
For model number GFW550SSN1WW
Hi Kevin, thank you for your query. Based on our research, the issue is probably with the user interface board, part number PS16226224, but before replacing it, we would recommend checking the main harness, part number PS16217196. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the GFW550SSN1WW
[Viewing 7 of 7]Will not drain
Fixed by
these parts
these parts

Show All
Locking Issues
Fixed by
these parts
these parts

Show All
Leaking
Fixed by
these parts
these parts


Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts

Show All
Water Filling Issues
Fixed by
these parts
these parts

Show All
Lid or door won’t close
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washer stopped working
My first step was to unplug and re-plug the washer into a different working electrical outlet to see if the power-on control panel would reset itself. The washer would cycle on but within few second it would power down. After watching an how to short video from GE website My next step was to get access to the main control board by disasse
... Read more
mbling the front and top panels to check for a blown fuse located on the board. I also checked the water pump filter for sign of lint build up. The lint filter was clean and the fuse wasn’t blown.
Next I attempted to set the control panel into diagnostic mode so as to read any error code stored on the board , I wasn’t successful therefore I summarized the control board needed to be replaced.
With the new control board on hand I unplugged the washer from the electrical outlet, grounded my wrist with a ground wire linked to the house water metal pipe. I proceeded to unscrew the control board module from the washer frame, unsnapped half dozen electrical leads then extracted the defective board. I carefully installed the new board double checking all connections for proper fit. After reinstalling the top and front panels I plugged and powered up the washer, it took me approximately two hours to successfully repair the washer.
Next I attempted to set the control panel into diagnostic mode so as to read any error code stored on the board , I wasn’t successful therefore I summarized the control board needed to be replaced.
With the new control board on hand I unplugged the washer from the electrical outlet, grounded my wrist with a ground wire linked to the house water metal pipe. I proceeded to unscrew the control board module from the washer frame, unsnapped half dozen electrical leads then extracted the defective board. I carefully installed the new board double checking all connections for proper fit. After reinstalling the top and front panels I plugged and powered up the washer, it took me approximately two hours to successfully repair the washer.
Read less
Parts Used:
-
teddy from CLINTON TWP, MI
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
14 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spin, no drain
Disassemble according to instructions then remove pump...my only issue was I ordered the pump and paid $11.95 for t
2 to 3 days shipping. I didn't get the part until the following Saturday which was like 6 to 7 days...horrible delivery
2 to 3 days shipping. I didn't get the part until the following Saturday which was like 6 to 7 days...horrible delivery
Parts Used:
-
Peter from CLAYTON, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!