Parts That Fix Frigidaire Dishwasher FPHD2481KF1 Leaking

The tubing carries water from the water inlet valve to the tub.

This genuine Frigidaire O-Ring is an essential component for your dishwasher's Motor & Pump Assembly. It functions perfectly in Frigidaire, Electrolux, White Westinghouse, and Tappan models, ensuring a seamless fit every time. Known as the Frigidaire Front O-Ring, this high-quality piece aids in the prevention of water leakage through the pump. Please ensure mains power and water supplies are disconnected for safety before commencing replacement. This product is recognized for durability and reliability, providing peace of mind for your household repairs. Always verify the model number when ordering to guarantee the proper fit.

Ensure the longevity of your Frigidaire dishwasher with this genuine O-Ring - Rear. Sourced directly from Frigidaire, the O-Ring is an essential component in your appliance as it helps prevent water leakage through the pump. This part is recommended for certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan appliances. To ensure a precise fit and reliable functionality, please verify your appliance model before purchasing. Remember to safely unplug your dishwasher and shut off the water supply before replacing this part, and consider wearing work gloves to protect your hands. Keep your Frigidaire dishwasher in optimum condition with this genuine O-Ring - Rear.

Water is supplied to the upper arm through this tube via the pump assembly.

Sold individually.

This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwasher. No tools are required for this repair, simple remove the rack stops and upper dish rack, then disassemble the mount and spray arm before installing the new one.

This kit includes the 2 o-rings.

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher. NOTE: Brass nuts are NOT included. Must be ordered separately.

This grommet fits on the spray arm of your dishwasher. This replacement part connects and seals the spray arm to the water hose that supplies water to the dishwasher tub. Be sure to shut off water supply to your appliance before completing this repair. This part is 3 inches in diameter and is off-white in color.

Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

This part releases the detergent and rinse aid into the dishwasher. NOTE: Color may vary but the part will function the same as the original.

Upper Rack Assembly - T3 PRO. This is the complete upper rack and the wash arm.

Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack.

As water is filling your dishwasher, a float rises along with it. When the float reaches a predetermined level, it shuts off the flow of water, thereby preventing a leak.

This lower spray arm is a genuine OEM part for various makes and models of dishwasher and is sold as an individual part. This part attaches to the lower spray assembly of your dishwasher and the lower spray arm itself clips into this part to facilitate its spinning movement during the washing cycle. To replace it, remove the spray arm by pulling it out, remove the surrounding circular clip and then twist to remove this bit. Made completely of plastic, this part measures approximately 3-inches deep, 2-inches wide, and 3.125-inches tall.

Keep your dishwasher running optimally with our authentic Frigidaire Sump Gasket. This essential component forms a watertight seal between your dishwasher's tub and the pump assembly ensuring maximum efficiency. Designed to work seamlessly with select models of Frigidaire, Electrolux, White Westinghouse, and Tappan, this genuine replacement part is a vital element for the smooth running of your appliance. Prior to installation, ensure to disconnect your dishwasher from the electricity supply and shut off the water supply. It is recommended that you wear work gloves during installation for safety. Trust Frigidaire for durable and reliable solutions for your appliance repair needs.

Make your dishwasher function smoothly with this genuine OEM Door Hinge Kit from Frigidaire. Designed to bolster both the right and left side of your dishwasher door, this all-inclusive kit promotes easy opening and safe closing. Positioned at the bottom of the appliance door, these hinge arms connect to the door hinge bracket on the dishwasher's frame. For optimum performance and safe handling, remember to unplug the dishwasher and shut off the water supply before installation. Equip yourself with working gloves to protect your hands during the process. Trust this product to increase the longevity and efficiency of your dishwasher.

The silverware basket, used for dishwashers, is in the bottom dishrack. The lower dishrack basket is used to hold eating utensils such as spoons, forks, and knives, and other small tools. If the basket in the dishwasher is worn out or the basket is broken, replacing it can be a solution. No tools for this replacement are required, as it is an easy process. If you need further guidance refer to the instructions provided by the manufacturer. For safety precautions make sure to unplug the dishwasher and wear gloves.

This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

This is a drain pump assembly for various compatible models of dishwashers, that is responsible for draining the water from the dishwasher after every cycle. This drain pump assembly is made of plastic and fits within the sump assembly, which controls the flow of water into the drain. This drain pump assembly is a genuine OEM part and is made of a high-quality plastic but is sold as an individual component without any other parts, like its drain pump check ball which works within the pump to prevent water from backwashing into the pump, as well as the drain pump cover. If you notice your dishwasher is not draining or has a lot of water buildup at the bottom of the sump assembly, this filter may be damaged, clogged or broken, and in need of a replacement. To replace this pump assembly, you will only need a Philips-head screwdriver, but should start by removing your dishwasher racks. Then, pull up on the lower spray arm, and drain trap to remove them. Next, rotate the spray arm support and pull that up to remove it, at which point you can remove the base and filter for the drain pump. With those out, you can use your Philips-head screwdriver to disconnect and remove the cover and drain pump assembly. With the pump removed, you can inspect it or install the new drain pump assembly, with the same hardware as before. Then it is as simple as reassembling the rest of your dishwasher, ensuring each connection point is fastened tightly.