Parts That Fix Frigidaire Dishwasher FDPC4221AW0A Leaking

Water is supplied to the upper arm through this tube via the pump assembly.

Sold individually.

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher. NOTE: Brass nuts are NOT included. Must be ordered separately.

This grommet fits on the spray arm of your dishwasher. This replacement part connects and seals the spray arm to the water hose that supplies water to the dishwasher tub. Be sure to shut off water supply to your appliance before completing this repair. This part is 3 inches in diameter and is off-white in color.

Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

As water is filling your dishwasher, a float rises along with it. When the float reaches a predetermined level, it shuts off the flow of water, thereby preventing a leak.

Enjoy trouble-free and efficient performance of your dishwasher with this genuine OEM Frigidaire water inlet valve. Designed to deliver an optimal flow of water to your dishwasher, this essential component ensures your dishes are always thoroughly cleaned. Despite similarities with other parts, this valve boasts a distinct size and shape specific to certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan dishwashers. Installation requires the dishwasher to be unplugged and water supply turned off for safety. We recommend wearing work gloves to protect your hands while fitting this genuine Frigidaire part. By focusing on quality and precise fit, this water inlet valve helps sustain your dishwasher?s performance over time.

This lower spray arm is a genuine OEM part for various makes and models of dishwasher and is sold as an individual part. This part attaches to the lower spray assembly of your dishwasher and the lower spray arm itself clips into this part to facilitate its spinning movement during the washing cycle. To replace it, remove the spray arm by pulling it out, remove the surrounding circular clip and then twist to remove this bit. Made completely of plastic, this part measures approximately 3-inches deep, 2-inches wide, and 3.125-inches tall.

Keep your dishwasher running optimally with our authentic Frigidaire Sump Gasket. This essential component forms a watertight seal between your dishwasher's tub and the pump assembly ensuring maximum efficiency. Designed to work seamlessly with select models of Frigidaire, Electrolux, White Westinghouse, and Tappan, this genuine replacement part is a vital element for the smooth running of your appliance. Prior to installation, ensure to disconnect your dishwasher from the electricity supply and shut off the water supply. It is recommended that you wear work gloves during installation for safety. Trust Frigidaire for durable and reliable solutions for your appliance repair needs.

Make your dishwasher function smoothly with this genuine OEM Door Hinge Kit from Frigidaire. Designed to bolster both the right and left side of your dishwasher door, this all-inclusive kit promotes easy opening and safe closing. Positioned at the bottom of the appliance door, these hinge arms connect to the door hinge bracket on the dishwasher's frame. For optimum performance and safe handling, remember to unplug the dishwasher and shut off the water supply before installation. Equip yourself with working gloves to protect your hands during the process. Trust this product to increase the longevity and efficiency of your dishwasher.

This is an OEM center spray arm, which works with dishwashers.

This is the replacement detergent dispenser for your refrigerator. It is gray in color and is sold individually. It is approximately 8.5 inches long and 3 inches wide. The detergent dispenser stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. This is an OEM part sourced directly from the manufacturer.

This is a drain pump assembly for various compatible models of dishwashers, that is responsible for draining the water from the dishwasher after every cycle. This drain pump assembly is made of plastic and fits within the sump assembly, which controls the flow of water into the drain. This drain pump assembly is a genuine OEM part and is made of a high-quality plastic but is sold as an individual component without any other parts, like its drain pump check ball which works within the pump to prevent water from backwashing into the pump, as well as the drain pump cover. If you notice your dishwasher is not draining or has a lot of water buildup at the bottom of the sump assembly, this filter may be damaged, clogged or broken, and in need of a replacement. To replace this pump assembly, you will only need a Philips-head screwdriver, but should start by removing your dishwasher racks. Then, pull up on the lower spray arm, and drain trap to remove them. Next, rotate the spray arm support and pull that up to remove it, at which point you can remove the base and filter for the drain pump. With those out, you can use your Philips-head screwdriver to disconnect and remove the cover and drain pump assembly. With the pump removed, you can inspect it or install the new drain pump assembly, with the same hardware as before. Then it is as simple as reassembling the rest of your dishwasher, ensuring each connection point is fastened tightly.

This plastic cover and stem assembly helps hold the lower spray arm in place.