Parts That Fix Frigidaire Dishwasher FDPC4221AS0A Will not fill with water
Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Enjoy trouble-free and efficient performance of your dishwasher with this genuine OEM Frigidaire water inlet valve. Designed to deliver an optimal flow of water to your dishwasher, this essential component ensures your dishes are always thoroughly cleaned. Despite similarities with other parts, this valve boasts a distinct size and shape specific to certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan dishwashers. Installation requires the dishwasher to be unplugged and water supply turned off for safety. We recommend wearing work gloves to protect your hands while fitting this genuine Frigidaire part. By focusing on quality and precise fit, this water inlet valve helps sustain your dishwasher?s performance over time.
As water is filling your dishwasher, a float rises along with it. When the float reaches a predetermined level, it shuts off the flow of water, thereby preventing a leak.
The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.